HP pavilion g6 do not boot nothing from any media

Hi, I have this notebook (HP Pavilion g6-1010sc) and one day it do not boot nothing from any media.
I tried to boot linux, winxp, original win7-x64 from internal and external USB disks, but unfortunatelly.
Notebook restarts or freezes after i tried to boot OS. Start of booting OS is correct, in original win7 it asked to run system normally or launch system repair. After i choose normal startup, its normally starting and only one point of WIN7 loading logo is shown and after this freezes.
When I run win7 installation from USB HDD or launch system repair, windows loaded files correctly, but after this, system restarts and capslocks LED blink two or three times and notebook startup again.
I have on second USB HDD linux ubuntu, which work on every computer correctly, but on this computer it freezes after small time.
I tested Back Track5 from DVD and during boot notebook restarts after one minute too.
I have tried to remove original HDD and try boot other USB HDD/DVD too, but no change. I tried other memory modules, but no change too.
System diagnostics of RAM and HDD is correct and no problem found.
Original bios on this notebook was F6.A and I tried older version F53 and only one change is, that in booting is shown more piece of WIN7 boot logo, and again freezes.
I tried disable automatic restart after system failure, but notebook it does not react on this, when it want to restart or freeze, it does it
Sorry for my english

No, i do not think, that I have UEFI bios. After I pres ESC and after F2 or directly after turn on press F2, my diagnostic menu looks as this:
This diagnostic tool is stored on HDD, when I removed HDD, this tool can not to run.
(By the way, tests will be passed.)
And original system is WIN7x64 and on support page is only this system and cannot be selected other operating systems, e.g. WIN8, which fully supports UEFI.
This reply is no solution for me. I tested internal HDD in different computer and it is 100% correct, and RAM i tried to change with other 100% correct modules as I wrote on last post and no change.
This means, that RAM and HDD is correct. I want to know, whether is error in notebook's mainboard or bios or some different.
I think, I am not first with such problem, and I do not want know solution only, but I want also know reason.
Thanks for reply, but it is no solution for this problem, and is outside.

Similar Messages

HP Pavilion Sleekbook 15 not booting up from USB (to clean install windows)

Hello there,
I have been trying to install windows 7 ultimate using from USB on my HP Pavilion Sleekbook 15 (Model: b153cl) but unfortunately even after changing the boot order on bios to the USB device it's still not picking up the USB to clean install windwos 7.
Machine came with pre-installed windows 8, and I hate that.
Can someone help me figure out the issue here... cause i have used the same bootable USB (windows 7) on another machine and it worked without any issues.
Thanks
Mike

well.. i was just reading this thread, http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HELP-download/m-p/4240018
and my problem has been solved...
thanks anyway for the prompt response..
Mike
Huffer wrote:
Have you turned off secure boot in the BIOS and enabled legacy boot? If the machine originally came with Windows 8 secure boot is enabled by default and it will block booting from Windows 7 media.

Will not boot up from DVD drive

HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive

Hi,
Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

My HP Pavilion zv6000 will not boot/recovery

My HP Pavilion zv6000 will not boot/recovery need help

Disconnect the AC Adapter and Battery from the unit. Hold the Power button down for about 15 seconds. Then without the battery being connected, plug in only the AC Adapter on the unit and check if this powers on the unit. You can also try to reseat the RAM on the unit. You can find the removal procedures on the Service and Maintance guide on www.hp.com for your model notebook. In case the notebook does not work after these steps, it could possibly be a hardware issue on the unit.
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

V3-5727105 will not boot up from HDD or from Recovery CD.

4 weeks ago when I switched on my laptop I got a blue screen message during start-up saying a problem had been encountered and it needed to restart to try to fix the problem, then just a dark grey screen and nothing.Laptop is only 7 months old. Contacted Tech Support and they stated I needed Recovery CDs and provided me with a set after I paid £60.Tried to boot from Recovery CD and got Acer Recovery Management to load, but after selecting restore to factory settings the laptop entered into a never ending cycle of 'analysing HDD' , attempting to fix HDD'.Left the laptop running for 12 hours and that was the only two messages I saw on the screen.No option to 'exit as problem encountered' so I had to power down my laptop to escape the 'loop'.Tech Support now wants me to try to format my HDD by taking my laptop to a local PC repair shop.Why am I being asked to do all the diagnosis work on a 7 month old PC? Surely it should be fixed under the manufacturers warranty?Could someone please explain what trying to format my HDD will show?Thanks

Update ..... My laptop would not boot up from the recovery disc as it turned out the hard drive required to be re-formatted to clear the fault. I was told by the PC Repair company that no matter what I tried I would not have been able to fix/clear the fault. Given it appears to have been a software corruption issue, after reading the Acer Warranty I have found out that I have to pay for the repair as the machine hardware remains in g.w.o. and the laptop is back in full working order once again. The PC Repair man did say however that if I had phoned him first instead of Acer Technical Support, I would not have needed to pay Acer for the set of Recovery discs as he would have provided a fresh installation of Win 8.1. at a fraction of the price! Lesson learned.

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

Mac Pro doesn't boot from any media

Hi,
We have a Dual Xeon Mac Pro that has been running fine since 2007 the person that uses it reported that it started making loud banging noises (how loud I do not know as thats quite subjective although it was loud enough to warrant other people in the office going to see what the noise was) and then the desktop crashed and now when it boots we get the folder with a flashing question mark.
I've put it down to disk failure but due to them having a Mac Pro (intel) and a Dual G5 PowerMac I think at some point in time they binned off one set of disks believing that one set would work for both machines resulting in none of the disks they have will boot the machine.
Oddly I haven't been able to boot it from any other media though, I downloaded the live version of Ubuntu for Netbooks to try to get it to boot from that but it wouldn't boot from that either and when I put it in selective startup mode it detects the CD in the drive as Windows.
So here I am with a Mac Pro an old G4 Mirror Doors era Apple Keyboard, no media that will boot the thing for diagnostics and wondering what my next move is. Back in the day when I admin'd a network of Mac's it'd be selective boot from a firewire drive try a repair do some cloning if required slap a new disk in reimage and off we go.
I haven't actively worked on a day to day basis on Apple kit for about 4 years though so I'm a bit rusty and have no experience with the Intel Architecture Macs other than my Mum and Dads iMac and MacBook and I'm pretty sure the media that came with them wont boot the Mac Pro, different media sets never used to work across ranges, not sure how true that is now though.
Any help with this much appreciated. Stats below
Sean

I had a quote from the local Apple Service Centre and Media for this machine was £70.
Luckily we found the Media for the Mac Pro inside a box for some other software.
I have since been able to retrieve the data by inserting the disk into a SATA equipped G5 and using disk utility on that machine to repair the volume and disk.
I've retrieved the data and the disk, volume and permissions structures all check out.
However the Intel Mac Pro will not boot from the now repaired drive, or from the original DVD shipped with the computer.
So off to the Apple Service Centre it goes for hardware diagnosis. I expect this to be expensive
Cheers
Sean

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

TS1702 This app will not be deleted from any iOS device that synchronizes with your iTunes library.

How do you remove an app from your iPad? I have synced the iPad and attempted to remove and this is the messgae I receive:
This app will not be deleted from any iOS device that synchronizes with your iTunes library.
HELP! Get rid of these Doodle Gods, Kick the Buddy, etc....

As Jim states, that procedure deletes the app and its associated documents from the device itself. At next sync, the deletion should propagate and get rid of the backup on iTunes as well.
If not, you can also manually delete that backup. Go into iTunes on the computer you sync the iPad with. If needed, select Show Sidebar in the View menu. Choose Apps under Library in the sidebar. Click on the All tab in the middle of the window. Scroll about till you locate the offending app amongst the bunch of icons. Right-click or Control-click on it and choose Delete from the popup menu. If the app is gone already on the device, there should be no warnings. You should delete from the device first and sync, so this manual step becomes unnecessary.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

IPad 2 will not send email from any app except from my actual email app

IPad 2 will not send email from any app (eg camara, pdf edit apps, evernote ect.) except from my actual email app. It will send email from my email account in the mail app or online. Pls help :-/

I had this problem
I hit the power button and the round button at the same time and held it until it rebooted
You get the black screen and the apple logo
When that was done I want to the app and update screen and I was able to update my apps
I suggest when you update stay on that screen until they all update
I find it sometimes get stuck updating when I leave the screen as they are updating and do other things, but I could be wrong. It just seems to me that is when it happens.
The reboot works and don't worry you don't lose anything when u reboot it's like shutting down a computer and powering it back up. Everything you had before will still be there.

HP Pavilion 11 x2 not booting from USB

I have tried everything I can think of but my HP Pavilion 11 x2 will not boot from USB...I have Windows 10 currently installed on it and need to boot from USB to allow me to install a new OS on the machine.
I have gone into hte bios...(which I can see is a locked bios with very limited options)....I have turned off the Secure Boot option and have set the USB has the first boot device.
But when I hit F9 on startup...it just gives me 2 options:-
OS Boot Manager
Boot From EFI File
I have tried Boot from EFI File...but this does not work..
I know the USB is configured correctly as I can boot from it on my desktop computer.
How can I get this to work?
Thanks in advance

hi,
i stumbbled into your thread while i was looking for a similar answer for my Pavilion X2 10".
mine was delivered with win 8.1 with bing. it was alright to use, but i was unable to bring this machine to connect to my office domain. due to the lack of networking features which is only available in the pro or enterprise version of win 8.1.
i tried many ways to load in a win 8.1 pro os. the disc is authentic, keys are authentic, usb stick or optical drives; it makes no differences. the machine just refuse to boot into the usb disc / stick like all other previous system does.
there isnt an option for the bios to go into legacy mode. however there is an option to turn off the secure boot, but that does not gives legacy support to the make the system boot to usb.
i had probably done the same things you tried, no matter what setting is done to the bios, there is always only 'os boot manager' and 'ueif' when i hit boot sequence (f9).
had tired everything that i can think of, talking to HP was like talking to an answering machine, and they were asking the most bacis questions ... "were you able to select 'legacy boot' from the bios menu?" ... even when i tell them there isnt a legacy boot option in the bios ... they were too amature .
i concluded that the only way to boot to usb is to do it in uefi with secure boot off and encryption turn off in win 8.1 (else it will bring u to bitlocker).
but i am still unable to boot into the usb media to install win 8.1 pro today. i gave up.

I want to wipe iBook of it's content, but it will not boot up from DVD

Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
Thank you for any help from out there.

No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
How to Nuke an ATA Hard Drive
http://ata.wiki.kernel.org/index.php/ATASecureErase
Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
Linux Release Watch
http://distrowatch.com/

HP Pavilion a1467c will not boot

Every time I try to start my Pavilion a1467c desktop the start button lights up, but the HDD light comes on yellow for about 30 seconds and then goes out. The display comes on with a blue screen with vertical white lines. The OS is Windows XP. I suspect the power supply, but the fan on the power supplie runs. I am looking for advise from someone with more experience.

OK. Let me answer my own question. Other than the blue screen with vertical white lines, the PC was acting like I have seen other PCs act on prior occasions. Upon starting up the computer, all goes well except it will not boot up and the HDD activity light goes out. Most of the time was related to a bad memory card. I opened up the case on the desktop, removed the three memory cards, cleaned the contacts on the memory cards, and reseated them in the slots. I then closed the case, plugged the power cord back in, pushed the start button, and the PC booted up like normal. I have rebooted it several times while updating drivers. It has been running for the past two days without a glitch. Simple fix.

HP pavilion g6 do not boot nothing from any media

Similar Messages

Maybe you are looking for