HP Pavilion laptop only connect to the internet when security is turned off

My HP Pavilion laptop running windows vista sp2 connects to the internet only when wireless security is turned off on my airport extreme (brand new purchased last week). Once I set-up wireless security my laptop shows local network access only and I lose my internet connection. Also, when I try to get back into the setup utility I get the following error message “an error occurred while trying to access the apple wireless device” and I cannot make any changes to my airport extreme set-up. I have tried many restarts and resets, but have only been able to connect properly with my laptop when wireless security is off. Additionally, during my setup attempts, my iphone has always had internet access. Greatly appreciate if anyone can offer ideas on how to fix this.

Have you tried resetting the modem and restarting your computer?

Similar Messages

  • HT1695 Why can't I connect to the Internet when I not at home

    Why can't I connect to the Internet when I'm not home

    If you do not have an iPad with 3G cellular service, you can only connect to the internet when you have access to Wifi.  Wifi is not available everywhere, but there are places that do offer free Wifi service, such as Starbucks, Panera Bread, the Airport, etc.  When you are at a location which offers free Wifi access, you have to join their network, which is usuall nothing more than touching a connect option that should automatically pop up, when you open Safari on your ipad. 

  • AirPort Express losing connection to the internet when part of WDS

    Hi,
    I have an AirPort Extreme Baste Station (802.11n) and an AirPort Express Base Station. I have set the Express to extend the wireless signal via WDS. However, after a while the internet connection seems to drop. My computer still tells me I have full signal, and AirPort utility reports no problems, but there just isn't a connection to the internet! If I turn off the Express and then turn off AirPort on my computer, and turn it back on again, I can access the weak Extreme signal.
    This is very frustrating. I was wondering if anyone had any ideas to what the problem could be?
    Thanks very much.

    I had been experiencing the same problem -- Airport Express extending an Aiport Extreme N base station via WDS constantly dropping the connection, but still showing solid green on the LED. I'm also using the WPA/WPA2 Personal encryption scheme over the whole network, and don't want to use no encryption at all or use WEP (which is pretty much the same as no encryption at all).
    Anyway, I seem to have found a solution that works on my system at least. After I made the change outlined below, my connection has been up and running for 5 days now after losing the connection about once every 3 hours or so before that:
    1. Open the Aiport Utility, click on the AEXN base station, and click Manual Setup.
    2. Click the Advanced icon in the toolbar.
    3. Click the IPv6 tab.
    4. From the IPv6 drop-down menu, select Link-local only.
    5. Click Update.
    The AEXN base station will restart with the new settings. You may also have to unplug the Airport Express WDS remote, and plug it back in after the AEXN base station has restarted.
    You also might want to change the radio channel on both the base station and the Airport Express to use channel 11.

  • Macbook Air only connects to the internet for a few seconds at a time.

    My 2013 Macbook Air (10.8.5) will only connect to the internet for a few seconds. It recognizes the wifi, but will just timeout when trying to access a website. If I turn Wifi off and then back on, it will work for another few seconds, only for the same issue to come up. I've tried EVERY SINGLE troubleshooting tip I could find and nothing works. I've renewed DCHP, rebooted my Mac, rebooted the router, network diagnostics, everything. I've scanned with Sophos multiple times and nothing has been detected. My 2007 MacBook Pro works just fine on the network as well as my roommates Macbook and my Apple TV. I have no clue how to fix it and am praying someone knows what to do. Please help!

    Start by getting rid of "Sophos," which is worse than useless.
    Remove the Sophos product by following the instructions on this page, and also this one, if applicable. If you have a different version, the procedure may be different.
    Back up all data before making any changes.

  • I have windows vista home premium and all other versions of iTunes worked on my laptop iTunes 10 won't work, I get a message saying I'm not connected to the Internet when I am. Why isn't iTunes recognizing my browser configuration?

    I have windows vista home premium and all other iTunes worked on my laptop, I downloaded iTunes 10 and now the iTunes will not connect to the Internet. I use Mozilla firefox on my laptop and for some reason it keeps saying the connection timed out and I'm not connected to the Internet when I am. Why isn't iTunes recognizing my web configuration?

    It probably has to do with your security and/or browser configuration.
    When my laptop crashed last year and I had to get a new one, I dealt with the same thing. First, go to your control panel and select the security section. See if your firewalls are up or not. If they are, turn them off. If you have any software to speed up your browser, that can affect the connection as well. Go into that software and disble/turn it off. If this doesn't work, contact customer support. They have a few other tricks they had me try that worked, but I can't remember them now.

  • Why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.

    why does a standalone program created in Labview 8.5 try connecting to the internet when the program only reads data through the serial port? Firewalls object to progams that contact the internet without permission.
    The created program is not performing a command I have written when it tries to connect to the internet, it must be Labview that is doing it. How do I stop this from happening? 
    Any help would be very appreciated.

    It looks that way..
    "When LabVIEW starts it contacts the service
    locator to removes all services for itself. This request is triggering
    the firewall.This is done in case there were services that were not
    unregistered the last time LabVIEW executed- for example from VIs that
    didn't clean up after themselves"
    This is not yet fixed in LV2009.
    Message Edited by Ray.R on 11-04-2009 12:25 PM

  • I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    Try changing the channel in use in case you're getting interference. 
    If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
    mrtotes

  • HT1695 my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense

    my ipad2 will not connect to the internet, it says that it "unable to join"...but my laptop is connected to the internet.... i don't understand why all of a sudden it stopped connecting it dosent make sense.

    hmm, well I would say that raises the possibility of an issue with your ipad, and lessens one with your router.
    What version iOS are you using? Update
    Then Its time to try a restore.
    How to update your iOS device
    http://support.apple.com/kb/HT4623
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • Blackberry Curve 8530 only connects to the internet using Wi-Fi

    My phone will only connet to the internet when the wi-fi connection is working. I can have a full signal for text messages and calls but when i turn the wifi off, i cannot connect to the internet or use the app world.
    does anyone now how to fix this or know how i need to direct the settings or to see if the settings have been reset or something?
    i have an unlimited data plan through virgin mobile usa.
    thanks

    Hi and Welcome to the Community!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    2)Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile network provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Premiere Elements 12.1 Constantly Connecting To The Internet When Running

    Hi there!
    I have an issue with Premiere Elements 12.1 constantly connecting to the Internet when running... it looks like it is either trying to connect to something or downloading something.
    Premiere runs OK, but it is very slow: this is due to it trying to connect. (We've proved this by running the program without the Internet disabled... it sits at about 13,000K in memory... and works fine).
    Anybody got any idea why it is connecting to the Internet in the first place and how we can stop it doing it.
    We believe this issue started when we updated to v 12.1... but can't be sure!
    We have tried uninstalling and re-installing it... same problem. We're virus checked till all night... nothing found (no root kits, nothing etc.)
    We're running Win XP Service Pack 3, 32 bit... I know 'Windows XP is old etc. etc. etc.'. Yet it still works great and is nice and fast for us here.
    Any advice/suggestions greatly received!
    Thanks in advance,
    GRBaker

    Hi Steve,
    Thanks a bunch for the post... we're certainly experiencing no other issues besides the 'downloading' issue on Premiere... various virus/spyware etc. scans have revealed nothing. There's nothing odd in the Startup or process list...
    PC operates entirely as normal... no unusual performance lags/Internet disconnections etc. No issues with other software, so far, after installing Elements.
    So we're currently leaving the program on to 'download' (or whatever it is doing), so it could be that it will eventually stop constantly accessing the Internet.
    We are already in contact with Adobe and they are keeping pretty tight-lipped about what it might be doing... saying (so far) only that Photoshop Elements/Premiere 12 does connect to CloudFront to 'download fonts'... (they were also basically indicating they thought it was our PC/a faulty install until we mentioned we knew it was CloudFront it was trying to connect to...)
    ...if the applications need to download stuff, then all Adobe has to say is 'it's perfectly normal, just wait for it to complete' then we would not be worried! All it needs is a simple notice to say that 'some additional downloads are required': give us a progress bar or something... no problem!
    I can't think why else it would be connecting to the Internet???? (Well, a couple do come to mind..!)
    We did pay for the download version of the software (we don't have physical installation DVDs) from one of Adobe's Registered resellers, so maybe that has something to do with it.
    I suspect you are 100% correct and that it isn't in fact a bug, bit simply some additional data/content that needs to download etc. If this is the case, then maybe it is related to our broadband speed (which can variable as we live in a rural location).
    As you say, if it was a bug everybody would have it! There is that thread I mentioned above, but that's for a previous version of elements I think... to me, as the user experiencing the issue, it definitely looks like a bug as it's rendering the software unstable!
    Most likely it's just our bad luck and there's something specific to my installation that's tripping the software and causing the issue. I suppose it depends how you define 'bug'... if it's a normal operation of the software that just happens to disagreeing with my system... than Adobe would say 'that's not a bug'... but I would say 'it's a bug as it causes this problem'. It simply a question of perspective!
    Anyway, it's mystifying to me: the software runs GREAT, when it's not trying to access the Internet. It's weird. You certainly can't complain, for price, it really is excellent software!
    Cheers,
    GRB

  • How to update my iphone when it says im not connected to the internet when i am?

    I know how to update my iphone but it says that im not connected to the internet, when i actually am?!
    Does anybody know how to solve this problem?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • TS1368 my itunes says i am not connected to the internet when i am and when i plug my ipod touch in it wont show in my itunes

    nothing to do with my firewall proxy laptop or version of itunes, seems to be an internet problem but clearly i am connected to the internet, HELP!!!!!!!!!!!!! thank you

    That was the first thing I tried..what the site told me, but its still telling me I'm not connected to the internet when I am. Should I just delete everything by hand. Like I said I wanted to take it back and upgrade to the 80 gig ipod.

  • When i try to update my mac it says im not connected to the internet when i am.!?

    I cant update my MacBook pro because it says im not connected to the internet when i try to update.
    However i am connected.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

    Halfway through the OS X Yosemite update it says I am not connected to the internet (when I know I am because I can search through the app store). How can I fix this? I cannot get on Safari because it requires an update to Mac OS X 10.9 or later.

    Just to be clear. You have downloaded the Yosemite installer. However you say while it's updating you get the error you are not online. This is confusing since you shouldn't be able to use your computer in the process of updating.
    Exactly where do you see you need to 10.9 to get on Safari?

  • HT201328 Does my computer need to be connected to the internet when I unlock my iPhone?

    Does my computer need to be connected to the internet when I unlock my iPhone?

    Thank you AnaMusic, this is the first time I used Apple Support Community and can't believe it was so quick.

Maybe you are looking for