HP Pavilion md5880n 58 inch 1080p Microdisplay TV Support

Picture problem. Watching a Blu-ray disc last night. In the darker scenes, picture appeared to have a dark blurred mesh screen over it. I haven't seen this before. Do you know what it might be or how to troubleshoot?

i have thesame problem, it just started. were you able to fix the tv? if so was it worh the price?
thanks

Similar Messages

  • Mac book to 32 inch 1080p television problems

    I also have a white MB, OS 10.5, I have used mini dvi to vga connector on 32 inch 1080p TV, The TV recognizes MB and my desktop background displays on TV, but none of my desktop icons display. If i open system pref on the laptop and click display a window opens on the tv and laptop recognizes and name the tv. If I open firefox on mb, nothing shows on the tv except my desktop background. I can open a powerpoint presentation on laptop but nothing on my tv unless I go to slide presentation and then it displays on the tv..I have tried to close my laptop, putting it to sleep but then the tv says no signal and goes to a blue screen.So the monitor is getting a signal from macbook but only limitted aspects appear on it. Also want to shut down the display on laptop and only use the tv display. Can anyone help? Ultimately I was going to buy a mac mini to hook up tp this tv as it is in kitchen and just thought if I could get mb to work I wouldn't have a problem with mac mini. But alas I am not sure mac mini will work. I would hate to buy a pc to use in this situation as I much prefer macs. Thanks for any advice anyone can give
    macbook white Mac OS X (10.5.6)

    Thank you all for your great advice and help. It worked!!! but I have one other very minor issue. How to I get the display on the monitor to be a different resolution than on my lap top? whenever I change the resolution on one it also changes on the other but not always identical. All of this was a test to be sure I could use the tv as a monitor. My plan is to buy a mac mini to be in our kitchen so if the laptop video card supports this particular tv I have been told the mac mini video card is better and should work as well. So just some reassurance needed before I buy the mac mini. Thanks again for all your help. You folks are super.

  • Two HP Pavilion 23fi 23-inch dead short after end of warranty!!

    Dear HP,
    I live in Australia and it is almost impossible to find the right information or even support from your local web site.
    I have two HP Pavilion 23fi 23-inch Diagonal IPS LED Backlit Monitor (C7T77A2) here on my desk and a few days apart BOTH displays died short after the warranty expired.
    My local shop where I bought the displays is not able to help me.
    Both displays show the same behavior, the display is decolored on the left side and only every second line is visible.
    It is annoying and very disappointing, I bought HP because I am very happy with my Z200 workstation, but the displays are not worth the name HP.
    I would be very pleased if some of your support personal could contact me to discuss the matter.
    Thank you.
    Chris

    Hi @chrisgeo 
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Pavilion 21.5 inch monitor sound

    Just bought Pavilion 21.5 inch IPS LEDBacklit Monitor but can get no sound and not clear where to plug in cable from PC or external speakers.

    Bob0044,
    When requesting assistance, please provide the complete model name and/or product number of the monitor in question.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HP pavilion 15 model no 15-n211se can support windows 7?

    HP pavilion 15 model no 15-n211se can support windows 7?

    Hi,
    Yes as shown on the following link:
         http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=6762357&
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion md5880n 1080p DLP TV

    The image reflects a double and triple picture along with horizontal thin white lines across the screen. Do I need to change the bulb or is this more of a tech problem and would need to be serviced. If so, what is the most probable item that needs replacing. Can I order this piece through you ? thanks

    i have thesame problem, it just started. were you able to fix the tv? if so was it worh the price?
    thanks

  • Insignia 32 inch 1080p LCD NS-32L450A11, computer hook up to tv not working

    I hope someone here can help. I purchased this tv over a week ago and just picked up a vga cable to hook up my computer to it. My computer is a HP Pavilion a6300f and was purchased back in 2008. So it only has a DVI and VGA hookup, and I'm using the DVI for my monitor. I followed the directions in the manual to the letter, and made sure that the cables were screwed in tight, and the TV was not detecting the VGA hook up. And I've tried to do some searching for this problem, but no luck so far. If someone can help I'd really appreciate it. Thank you.
    Solved!
    Go to Solution.

    You must use the Function keys on the HP computer to extend the desktop to the TV.  The TV must be on and connected when the computer boots.  Use the appropriate Function key combo to cycle through the various desktop modes...You'll be able to clone your desktop to the TV, extend your desktop to the TV, or make the TV your primary video monitor.
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • What res/screen ratio do I adjust my 13inch Macbook to so everything is seen fullscreen ( unsquashed ) when linked to a 21 inch ( 1080p) Samsung monitor please?

    Hi there,
    I have a 13 inch Macbook which I've linked up to a 21 inch Samsung monitor ( 1080 ). The second I do this, all documents on my Mac appear squashed and I cannot see them full screen ( I have to spend my whole time scrolling around to see docs fully )
    I've been into the monitor ratio in the system prefs -
    It was set to 1600 x 1200 and 1280 x 800
    It's now set to 800 x 600 and 1024 x 768
    I don't even know which I should be altering.
    Ideally I'd like it all fullscreen ( widescreen ) but if I have to have it at 4:3 then I'd at least like to be able to view things fully. It seems to work fine when going fullscreen on you tube, but for office presentations and photo previews etc I can only see a portion of the original.
    Is this just something I have to get used to?? Would a differently sized monitor or even a mac monitor make it all ok?
    I'd really appreciate anyone's help,
    Jamie

    Eustace
    Thank you so much for replying.  However I was about to remove this post.  I worked out how to do it!
    If anyone is having similar issues then turn off mirroring and change the arrangement in display preferences so that the monitor works as the main display and the macbook just shows the desktop.  I then turned down the brightness levels on the macbook to conserve power.
    Feel very proud of myself, but thank you!
    S

  • Pavilion 17.3 inch screen upgrade

    Hello 
    I've started a photography business and i need a better screen for my editing. I want a screen that rivals the imac retina screen. the one I currently have takes to long to edit because I have guess where I think changes need to be made then  send the image to my iphone to see what needs changed again. I've calabrated the screen with an x-rite color monki which helped but still no where near where I need it to be.  Its a windows 8 op and the model is a Pavilion
    This question was solved.
    View Solution.

    Hi,
    All laptop screens use very standard panels. As a pro, you NEED a right sreen for your business, I am talking about 4 digit $ screens here. My suggestion: go for an external screen, you can get a very good one for around $700 up. Please check the following link, it's a bit old but will give you some ideas:
         http://compreviews.about.com/od/monitors/tp/Graphi​csLCDs.htm
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion 23xi 23-inch Diagonal IPS LED Backlit Monitor

    I use my monitor when im capturing game footage for a youtube channel. However evertime i try to capture olde games the message  'input signal out of range' pops up. i dont understand! the game looks fine on the screen but that message is in the way! is there anyway to turn it off?

    Hi dracucard,
    I have researched your error and usually the cause is a higher screen resolution then what the monitor is capable of or corrupt graphic drivers. I would suggest reinstall or updating your graphic drivers. Are you using an HP PC? If so, what is your product number? What program are you using to capture the video.
    Find your product number on a desktop:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Hp pavilion g70 17-inch front bezel 488386-001 were can i find one for under 40 usd

    If anyone knows the best place to get one of these in the US I would be totally greatful.

    If anyone knows the best place to get one of these in the US I would be totally greatful.

  • HP Pavilion 23tm 23-inch Diagonal Touch Monitor driver for windows 10

    When I upgraded from Win 8.1 to Windows 10, the driver for this monitor was not migrated.  A generic driver was installed instead.  The generic driver does not support screensaver or sleep mode on this monitor.  Is there a new HP driver compatible with Windows 10?

    Also now i have tried installing touchscreen driver of windows 8.1 in windows 10 i.e. replaced driver version 10.0.10240.16384 with driver version 06/21/2006, 6.3.9600.17041, Provider - Microsoft .. and if we look into device manager, 1 HP 23tm monitor installs all these things for touchscreen .. HUMAN INTERFACE DEVICES     1.  HID Compliant touch screen     2.  HID Compliant vector-defined devices     3.  HID Compliant Whiteboard     4.  Microsoft Input Configuration Device     5.  USB Input Device (x3)MICE AND OTHER POINTING DEVICE     1.  HID Compliant Mouse (x2) #Total=9 Since i have 2 monitors all these things are in multiple of 2 #Total=18 .. and i have replaced all the 18 drivers with that of windows 8.1 but still the same thing is hapening :-(

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

  • Does MacBook Pro 13 inch (mid 2010 model) Support DP MST 1.2?

    Does the MacBook's Pro 13 inch (mid 2010 model) mini Display Port output support the DisplayPort 1.2 Multi Stream protocol?
    The graphics card on this model is the Nvidia GeForce 320M.
    Thank you.

    DsiplayPort and its variant Mini DisplayPort are interesting protocols because they use a packet interface to send mostly the changed data. There is no gratuitous repainting the screen with the same data (every 1/60 second or similar) as performed by almost every protocol that came before it.
    This would free a lot of time on the interface for the information to support an additional display in the newly freed "dead time" when nothing has changed on the primary display. What would be needed at the computer end is a different address for the second and subsequent display(s). What would be needed at the Display-end is a display with a "daisy chain" output port (it cannot be the same as an input port because the signal drivers are set up to accept input, not drive output) to be able to pass the signal along to another display.
    To the best of my knowledge, Apple has not yet taken advantage of this ability to address a second display, and at this writing these interfaces on Apple computers support only one Mini DisplayPort display.
    There may be the ability to daisy-chain a second Thunderbolt display off the first Thunderbolt display in a chain, when working with a Mac's Thunderbolt connector.
    But at this writing, any Mini DisplayPort device connected to that port is always the last device on the chain.

  • Pavilion Media Center PC m7330n - 3gig drive support

    I have a Pavilion Media Center PC m7330n and am think about purchasing a 3g SATA hard drive. The BIOS version is Phoenix-Award V3.47 (Core version 6.0) Do you think that my system will support a 3g drive? Thank you

    Hi chavinda546,
    No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor.  And,  your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for