HP Pavilion Media Center m8200n Desktop PC/ recovery disks FAIL

I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?

thekissfan wrote: I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?
Hello thekissfan, Sometimes the HP Recovery Restore disk will not work on a new unpartioned and unformatted hard drive.
The hard drive would need to be prepared for the HP Recovery Restore disk.
The new hard drive would need to be partitioned, and formatted, and then the HP Recovery Restore Disk may work.
This is a fairly common issue. If your new hard drive came with a CD, you may be able to use the CD to boot the system and prepare the new hard drive.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

HP Pavilion Media Center m8200n Desktop PC Upgrades Tips and advice help.

Hello everyone I have a HP Pavilion Media Center m8200n Desktop PC that I'm looking to upgrade. Can anyone please advice me on the following topics:
Memory: What's the best possible memory that my system can hold I am currently running windows 7 ultimate 32-bits
Video card: I'm looking to upgrade to a decent video card with hdmi support that my system can hold I'm aware that i cant use certain video cards cause of my power supply capacity, upgrading the power supply can be a option. Can anyone please advice me on those topics It will be much appreciated thank you everyone I will be sure to rep and appreciate anyone's help thank you.
This question was solved.
View Solution.

Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor. And, your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Updating Win8 to Win8 Media Center! Will New Recovery Disk include update?

Reading the manual says that making a set of recovery DVD's will return laptop to purchased state. I was hoping new set would included the media center files.
Thank you for any advice.
Tom Lawell
Solved!
Go to Solution.

Toshiba recovery discs always restore the hard disk to its original out-of-the-box contents, Tom.
It's not difficult to upgrade from there using the product key you have.
In order to back up your current disk, you'll need to use third-party software.
Always tell us which computer you have when you post here. There is a label on the bottom.
-Jerry

HP Pavilion Media Center TV m7580.uk Desktop PC

Hello
I am experiencing problems with me desktop computer, when I turn on the computer and monitor, no information is displyed on the monitor. Electricity is still going through the monitor as displayed with the orange indicator light. Could it be the graphics card or the monitor that is not working? I am planning to plug in another monitor to see if it is the monitor that is not working properly. At the moment I can not afford to buy new hardware. Does anyone know what else I could do, that does not require me to buy new hardware?
Thank you.

Hello @Raj2014,
I understand that you are having issues with the monitor on your HP Pavilion Media Center TV m7580.uk Desktop PC not displaying anything and it has an orange light. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs. What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc. This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system. This happens whether I trying to Play a disc or burn the disc to the hard drive. The drives work great though as they do play DATA discs all the way through. MP3 discs play fine. It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything. Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help. Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

Hi,
All dimms work individually? Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive? I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk? Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
You have some options to consider once you can stablize your PC for updating the BIOS.
Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
Try a bootable BIOS update process as suggested at this site. -- less safe but doable
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Pavilion Media Center PC m7330n - 3gig drive support

I have a Pavilion Media Center PC m7330n and am think about purchasing a 3g SATA hard drive. The BIOS version is Phoenix-Award V3.47 (Core version 6.0) Do you think that my system will support a 3g drive? Thank you

Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor. And, your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion Media Center m8300f Hangs on boot

I have a HP Pavilion Media Center m8300f which came loaded with Vista Home Premium. About 18 month sold. Recently the computer would hang on boot up. I used the system restore and went back to a safe install. This worked ok until Windows added more patches which caused the same problem to occur again. After one or two of these episodes I was not longer able to return to a safe install. I ran the system recovery several times to check the hardware. Everything turned up good. Since I did not have a good set of recovery disks I decided to install XP on the computer and then upgrade to Vista. XP installed without a single problem. I purchased a NEW Vista Home Premium because I could later upgrade free to Windows 7. I tried to install Vista over XP. The process would start and then hang. So I reformated the hard drive using an external USB unit on another computer, replaced the drive and tried to install Vista off the DVD. It would not boot up. As a test using the Vista DVD I purchased, I upgraded XP on a separate computer to Vista. Worked very nice.
I ordered a set of the recovery DVDs and tried them. They would not boot up. I replaced the hard drive with a new SEAGATE SATA drive because I felt the connectors were not locking in. I still could not get the recovery DVDs to run. I went back to the XP and it installed. So here I am with a computer that willl not run or install Vista but will run XP. Also HP does not provide the XP drivers for the hardware on this computer.
Does anyone know why Vista will not install or how to get it on this computer?
I installed a NEW Seagate SATA hard drive for drive "C" because the connectors where not locking in place. rmated the hardI purchased the Recovery DVDs from HP and tried to reinstall it.

I had the same problem with computer halting with blue screens, black screens, etc. Motherboard had 6 capacitors with bulging tops. I found a replacement Nettle 2 motherboard from seller diypc2008 on E-Bay for the cost of $75.00 with free shipping. Installed new motherboard and computer works like new.
It appears like at around 2 years, this problem occurs from what I read on this forum. Look for capacitors on the motherboard with bulging tops. I fixed my computer by replacing motherboard after running many hours of diagnostics, replacing power supply, and changing out drives.

Drivers for HP Pavilion Media Center a1530n

I am unable to find the drivers for HP Pavilion Media Center a1530n. I tried the auto detect feature but the software would not install. When i enter the model number, it says it has no record of this model. I need the drivers because I reformatted the hard drive and reinstalled windows but i do not have the driver disk for installation.

Hi,
Hope the following link is the site you are looking for:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3182805
Please select the right OS for your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavilion Media Center TV m7674n Desktop PC

Recently I've been getting a "no hardware found" warning when trying to listen to FM using Windows Media Center. I've opened the computer and made sure the tuner card was firmly in it's slot. That's worked up until today. Looking for a suitable replacement for my tuner card. Considering the Hauppauge WinTV PVR-150MCE. Would like to upgrade to HD, but not sure if my computer would handle it. Any advice? (note: this computer shipped with 2g of memory, but I upgraded it to 4g).

While that hardware is fairly old, it might be OK with a new video card.I did find THIS ON A DIFFERENT THREAD where the poster claims to have sovled the problem, however. Yes, I confirm that if you download the latest NVidia driver 309.08 from their website and update the Windows Basic Graphic Card Driver with it by extracting the downloaded file to a location and "Browse" to it from the Driver Update from Properties, Windows 10 works perfectly on my old Dell Vostro PC with an NVidia 7300 Le Graphics card.

Can I download recover disc 2 for HP Pavilion Media center 2005 edition

I had to recovery it and I could not find disc 2 and disc 1 has loaded

It is not possible. Recovery disks are created to match the system's installed applications and OS.
You can purchase a new set from:http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv6125se&bkm=Results#Results
435337-001
Operating System:
Windows XP Media Center Edition
Number of CDs:
$27.00
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I have an HP Pavilion Media center PC model #m370n. I am running windows XP Pro, internet explorer 7

My computer freezes in Media center program, when I try to set up a TV signal, or try to run the FM radio feature. Do I have too many drivers loaded? Or, the wrong drivers? Can I check to see if my Infared Transceiver is working? Can anyone help me with this?

My first thought when reading your post ( video jerky) is that the CPU doesn't have enough horse power? What is the GHz of the AMD athlon? 1.8 GHz would be right on the edge with video. And where the computer will max out at 1 Ghz of RAM indicates the laptop is older and the CPU probably as well. 1 GHz of RAM maybe low on today's computers but would not be an issue if the CPU was perhaps 2.8 GHz. The audio is less demanding by far on CPU's than video, so that could be a codec?

Audio on Pavilion media center

I have lost all sound on my Pavillion media center, I have tried everything nothing works, it says no speakers plugged in even thought they are plugged in correctly. now the tech tells me the audio port is corrupt. Does anyone have a suggestion other than getting a new computer.

What model HP PC and operating system are you using? Perhaps an updated audio driver would help.
How to Find the HP Model Number
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

New HP HDD load recovery disks fails to boot after install process on pressing continue

I have Pavilion d7-4165dx notebook. I live out US, though made purchase from US (BestBuy).
- HDD failed after renewing trial period of virus software.
- All diagnostics would not recognize HDD.
- HP support indicated still in warranty, but I am out of country. HP indicated most likely issue was HDD cable.
- Purchase cables and had someone hand carry out of US.
- Installed, still same response.
- Ordered new HDD from HP. Backordered. Finally on inquiring was directed to a US 3rd part rep. He recommended buying directly from outlet, but a higher speed. Did that and then HP replacement HDD arrives. Hand carry both out of US.
- Install faster (slightly smaller) Seagate 500G 7200. Started recovery with recovery disks (5 total that received from BestBuy, but not OEM looking), but is squawked as new HDD is smaller than original WD 640G 5400. Put WD into #1 bay and Seagate into #2.
- Start recovery disk process. Go through entire recovery from factory process and on last disk, it says to not touch while PC boots on and off, etc. Then says press Continue to continue.
- When press continue, simply goes to black screen with "No boot device..."
- Run other options, same message.
- Ran diagnostics. HDD all OK.
- Called HP support. He indicates I need to buy the HP recovery disks. The ones I have (5) are not the right one, that there should only be 3! They are as I received from BestBuy, but look like they were made there when BestBuy sets up the PC.
Any suggestions anyone?
This question was solved.
View Solution.

Sorry, I don't have an answer, but rather a similar issue. I replaced a 320Gb - 5400 rpm drive that failed with a 750Gb - 7200 rpm drive and even though I have the factory restore disks, it won't recognize the hard drive and I too get the "No Boot device" message. Unfortunately, the BIOS is not the best and it won't allow me to see if it actually recognizes the new hdd, which I suspect it doesn't. Either that or I have a bad MB.
Sytem information - HP G71-340US
Processor - 2.20 GHz Intel Core2 Duo Processor T6600
BIOS - InsydeH20 3.5
Recovery manager *appears* to be installing W7 just fine, but it's a no go when it's time to actually boot to it. Is this a mb issue or did I just buy the wrong hd?

Creation of Recovery Disks - 'Failed to open the following file" Error

Greetings All,
I am in the process of trying to create a Recovery Disk Set for a Client's *Satellite L300 - PSLB8A-07U004*.
While the application opens and begins the creation of the disk set, it has, three times now, failed at with the error message of *"Failed to open the following file. D:\!V5_01_07.VRP (Error Code: 020123-F1-00000000)".*
I did attempt this process the first time while the all the client's data was still loaded.
I have now done a 'Restore to 'Out of the box experience' because I thought one of those files might be the cause but, alas, the error was repeated.
Obviously this is irritating (to say the least).
I have NOT made any change to the layout or sizing of partitions.'
Any thoughts?
rampant_rhino

Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both.

Dv7--6b57nr attempting use recovery disks after virus. Recovery disks fail to load

I am attempting to load the recovery disks for Windows 7 Home Premium. Had a few virus's and the recovery disk installs fails. Have checked the disk within the Bios. The error is as follows: The Recovery attempt has faild. Select one of the following buttons: Save Log; Details; Retry. I don't see any specific errors besides the Recovery attempt has failed. What is the next step that Ineed to do. I have the saved log file HP_SSRD_LOG.SRD.
I have a Serial # of 2CE1480BIX and a product ID of AIT85UA#ABA.
I have attempted to reload after I blanked out the whole drive. That was the only what to get rid of the viruses of the system. I am a tech working for the owner Waymon. Please assist me or tell me exactly what I need to do to get this problem resolved and get the system loaded. Thanks.
Gets to he HP Software Installation now on the five installation try. It then reboots and tries to reload the system.   Here is the error { The Recovery Attempt Failed. Select on eof the Following Buttons:
Save Log ; Details ; Retry.
Here is the file from the Details button. CTOERROR.FLG.txt
[12:53:08.53] Entering Checking OS Edition...
[12:53:08.53] Check RStone.ini file to determine the requried edition.
[12:53:08.58] Exiting Checking OS Edition...
[12:53:08.60] Check if Upgrading Win 7 is required.
[12:53:08.61] Current Edition is [HomeBasic]...
[12:53:08.63] Required [Starter]. Don't need to upgrade...
[12:53:08.63] Required [Starter] ...
[12:53:13.28] Required [Starter] Edition. But, OS is not [Starter]...
[12:53:13.28] Upgrading OS edition might have some problem...
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.17514
Current edition is:
Current Edition : HomeBasic
The operation completed successfully.
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Error found: No OS Flag set on unit, please use EEPROM to set ~OS SKU~ value = 2
[12:54:04.13] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[12:54:04.15] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[12:54:04.15] ------------------------------------------------------------------------------------------
[12:52:11.75] Start BBOffline.cmd...
UPDrv=[C:]
[12:52:11.77] Set UIA Error Code to 951
[12:52:12.08] WinPE is 32bit.
[12:52:12.08] Starts [FixUps].
[12:52:12.09] ---------------------------------------------------------------------
[12:52:12.09] FixUps.cmd...
[12:52:12.09] create overall progress info...
[12:52:13.72] FixUps.cmd completed...
[12:52:13.72] ---------------------------------------------------------------------
[12:52:13.72] Starts [Tweaks for SSRD].
[12:52:13.75] ---------------------------------------------------------------------
[12:52:13.75] SSRD Tweaks to change user default locale...
[12:52:13.75] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[12:52:13.86] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[12:52:21.38] ---------------------------------------------------------------------
[12:52:21.38] Launch PININST.exe for Offline ...
[12:52:33.37] Starts [Sleep 10 sec].
[12:52:43.43] Starts [Create RStoneFUpdate.INI].
[12:52:56.48] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 9EEF-EDFF
Directory of C:\system.sav\bbv
11/23/2013 12:52 PM     1,073,741,824 pagefile.sys
               1 File(s) 1,073,741,824 bytes
               0 Dir(s) 44,736,716,800 bytes free
[12:52:56.57] Brand detection.
[12:52:56.87] ---------------------------------------------------------------------
[12:53:43.17] Start SysID Check...
[12:53:43.62] Start Option Code Checks...
SKU_DEF_COUNTRY=[244]
SKU_DEF_SYS_LOC=[en-US]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7601.17514
Reporting offline international settings.
Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[12:53:59.16] Start PIN Tweaks...
[12:53:59.20] ---------------------------------------------------------------------
[12:53:59.20] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[12:53:59.20] ----------------------------------------
[12:53:59.20] Tweaks for OOBE's Unattend.xml
[12:53:59.20] to pick up the proper file...
[12:53:59.20] ----------------------------------------
[12:53:59.20] rename unattend.org to unattend.or_
[12:53:59.25] ----------------------------------------
[12:53:59.25] without Light Sensor..
[12:53:59.25] ----------------------------------------
[12:53:59.27] This is Restored image by SSRD [SSRD.flg]...
[12:53:59.28] ---------------------------------------------------------------------
[12:53:59.31] Start MIR Tweaks...
[12:53:59.34] ---------------------------------------------------------------------
[12:53:59.34] [MIR Tweaks] ...
[12:53:59.36] ---------------------------------------------------------------------
[12:53:59.39] Start Factory Update(s)...
[12:54:01.28] Start QFE Offline installation...
[12:54:03.96] PININST_OFF: PASSED...
[12:54:03.99] Type C:\System.sav\Logs\BBFindEr.log...
[12:54:04.01] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[12:54:04.04] Type C:\System.sav\Logs\BBFindEr.log...
[12:54:04.05] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\BBFIND4QFE.LOG
[12:54:04.05] Check FUList.log if there is duplicate Desc...
No duplication.
[12:54:04.13] No Duplicated Desc is found... PASSED.
[12:54:04.13] There was no Factory Update...
I also have to HP_SSRD_LOG.SRD file. What Do I need to do now? Thanks.

Recovery Discs failure is frequent, and unfortunately has many causes. Some things to try that have worked in other cases.>>
1-Enter BIOS and reset to Default settings. Usually it is F9 key,check bottom of screen to be sure. Next F10 to Safe & Exit. Run Recovery again.You can attempt it from the partition now instead of Discs if preferred by tapping away at the F11 key at start up.
2-Scroll down on the page and get> Bootable CD ISO and> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is Here. Once created, boot from it. Delete any hdd partitions, create one and format. Next try booting from Recovery Discs again.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP Pavilion Media Center m8200n Desktop PC/ recovery disks FAIL

Similar Messages

Maybe you are looking for