HP Pavilion Media Center m8200n Desktop PC Upgrades Tips and advice help.

Hello everyone I have a HP Pavilion Media Center m8200n Desktop PC that I'm looking to upgrade. Can anyone please advice me on the following topics:
Memory: What's the best possible memory that my system can hold I am currently running windows 7 ultimate 32-bits
Video card: I'm looking to upgrade to a decent video card with hdmi support that my system can hold I'm aware that i cant use certain video cards cause of my power supply capacity, upgrading the power supply can be a option. Can anyone please advice me on those topics It will be much appreciated thank you everyone I will be sure to rep and appreciate anyone's help thank you.
This question was solved.
View Solution.

Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor.  And,  your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • HP Pavilion Media Center m8200n Desktop PC/ recovery disks FAIL

    I had to replace a crashed hard drive.  BIOS shows that it recognizes the new drive.  Can NOT boot system.  Error message says disks (obtained upon purchase of computer) do not belong to this pc.  What?  I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks.  Is it possible that I have the wrong disks?  Or is this a big scam?

    thekissfan wrote: I had to replace a crashed hard drive.  BIOS shows that it recognizes the new drive.  Can NOT boot system.  Error message says disks (obtained upon purchase of computer) do not belong to this pc.  What?  I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks.  Is it possible that I have the wrong disks?  Or is this a big scam?
    Hello thekissfan, Sometimes the HP Recovery Restore disk will not work on a new unpartioned and unformatted hard drive.
    The hard drive would need to be prepared for the HP Recovery Restore disk.
    The new hard drive would need to be partitioned, and formatted, and then the HP Recovery Restore Disk may work.
    This is a fairly common issue. If your new hard drive came with a CD, you may be able to use the CD to boot the system and prepare the new hard drive.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • HP Pavilion Media Center TV m7580.uk Desktop PC

    Hello
    I am experiencing problems with me desktop computer, when I turn on the computer and monitor, no information is displyed on the monitor. Electricity is still going through the monitor as displayed with the orange indicator light. Could it be the graphics card or the monitor that is not working? I am planning to plug in another monitor to see if it is the monitor that is not working properly. At the moment I can not afford to buy new hardware. Does anyone know what else I could do, that does not require me to buy new hardware?
    Thank you.

    Hello @Raj2014,
    I understand that you are having issues with the monitor on your HP Pavilion Media Center TV m7580.uk Desktop PC not displaying anything and it has an orange light. I am providing you with some steps you can try below:
    Step 1. Unplug the power cord from the back of the monitor and the wall
    Step 2. Hold the power button down for at least one minute
    Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
    Step 4. Press the Menu button on the monitor
    Step 5. Navigate to the Factory Reset option and select it
    Step 6. Try a different cable connecting your monitor to your computer
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

    I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It  has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs.  What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc.  This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system.  This happens whether I trying to Play a disc or burn the disc to the hard drive.  The drives work great though as they do play DATA discs all the way through. MP3 discs play fine.  It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back  from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything.  Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help.  Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

    Hi,
    All dimms work individually?  Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive?  I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk?  Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
    You have some options to consider once you can stablize your PC for updating the BIOS.
    Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
    Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
    Try a bootable BIOS update process as suggested at this site. --  less safe but doable
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • HP Pavilion Media Center m8300f Hangs on boot

    I have a HP Pavilion Media Center m8300f which came loaded with Vista Home Premium. About 18 month sold. Recently the computer would hang on boot up. I used the system restore and went back to a safe install. This worked ok until Windows added more patches which caused the same problem to occur again. After one or two of these episodes I was not longer able to return to a safe install. I ran the system recovery several times to check the hardware. Everything turned up good. Since I did not have a good set of recovery disks I decided to install XP on the computer and then upgrade to Vista. XP installed without a single problem. I purchased a NEW Vista Home Premium because I could later upgrade free to Windows 7. I tried to install Vista over XP. The process would start and then hang. So I reformated the hard drive using an external USB unit on another computer, replaced the drive and tried to install Vista off the DVD. It would not boot up. As a test using the Vista DVD I purchased, I upgraded XP on a separate computer to Vista. Worked very nice.
    I ordered a set of the recovery DVDs and tried them. They would not boot up. I replaced the hard drive with a new SEAGATE SATA drive because I felt the connectors were not locking in. I still could not get the recovery DVDs to run. I went back to the XP and it installed. So here I am with a computer that willl not run or install Vista but will run XP. Also HP does not provide the XP drivers for the hardware on this computer.
    Does anyone know why Vista will not install or how to get it on this computer?
    I installed a NEW Seagate SATA hard drive for drive "C" because the connectors where not locking in place. rmated the hardI purchased the Recovery DVDs from HP and tried to reinstall it.

    I had the same problem with computer halting with blue screens, black screens, etc.  Motherboard had 6 capacitors with bulging tops.  I found a replacement Nettle 2 motherboard from seller diypc2008 on E-Bay for the cost of $75.00 with free shipping.  Installed new motherboard and computer works like new. 
    It appears like at around 2 years, this problem occurs from what I read on this forum.  Look for capacitors on the motherboard with bulging tops.  I fixed my computer by replacing motherboard after running many hours of diagnostics, replacing power supply, and changing out drives.

  • Pavilion Media Center PC m7330n - 3gig drive support

    I have a Pavilion Media Center PC m7330n and am think about purchasing a 3g SATA hard drive. The BIOS version is Phoenix-Award V3.47 (Core version 6.0) Do you think that my system will support a 3g drive? Thank you

    Hi chavinda546,
    No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor.  And,  your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Drivers for HP Pavilion Media Center a1530n

    I am unable to find the drivers for HP Pavilion Media Center a1530n.  I tried the auto detect feature but the software would not install.  When i enter the model number, it says it has no record of this model.  I need the drivers because I reformatted the hard drive and reinstalled windows but i do not have the driver disk for installation.

    Hi,
    Hope the following link is the site you are looking for:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3182805
    Please select the right OS for your machine.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion Media Center TV m7674n Desktop PC

    Recently I've been getting a "no hardware found" warning when trying to listen to FM using Windows Media Center.  I've opened the computer and made sure the tuner card was firmly in it's slot.  That's worked up until today.  Looking for a suitable replacement for my tuner card.  Considering the Hauppauge WinTV PVR-150MCE.  Would like to upgrade to HD, but not sure if my computer would handle it.  Any advice?  (note: this computer shipped with 2g of memory, but I upgraded it to 4g).

    While that hardware is fairly old, it might be OK with a new video card.I did find THIS ON A DIFFERENT THREAD where the poster claims to have sovled the problem, however. Yes, I confirm that if you download the latest NVidia driver 309.08 from their website and update the Windows Basic Graphic Card Driver with it by extracting the downloaded file to a location and "Browse" to it from the Driver Update from Properties, Windows 10 works perfectly on my old Dell Vostro PC with an NVidia 7300 Le Graphics card.

  • I have an HP Pavilion Media center PC model #m370n. I am running windows XP Pro, internet explorer 7

    My computer freezes in Media center program, when I try to set up a TV signal, or try to run the FM radio feature. Do I have too many drivers loaded? Or, the wrong drivers? Can I check to see if my Infared Transceiver is working? Can anyone help me with this?

    My first thought when reading your post ( video jerky) is that the CPU doesn't have enough horse power? What is the GHz of the AMD athlon? 1.8 GHz would be right on the edge with video. And where the computer will max out at 1 Ghz of RAM indicates the laptop is older and the CPU probably as well. 1 GHz of RAM maybe low on today's computers but would not be an issue if the CPU was perhaps 2.8 GHz. The audio is less demanding by far on CPU's than video, so that could be a codec?

  • Can I download recover disc 2 for HP Pavilion Media center 2005 edition

    I had to recovery it and I could not find disc 2 and disc 1 has loaded

    It is not possible. Recovery disks are created to match the system's installed applications and OS.
    You can purchase a new set from:http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv6125se&bkm=Results#Results
    435337-001
    Operating System:
    Windows XP Media Center Edition
    Number of CDs:
    $27.00
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Audio on Pavilion media center

     I have lost all sound on my Pavillion media center, I have tried everything nothing works, it says no speakers plugged in even thought they are plugged in correctly. now the tech tells me the audio port is corrupt. Does anyone have a suggestion other than getting a  new computer.

    What model HP PC and operating system are you using?  Perhaps an updated audio driver would help.
    How to Find the HP Model Number
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Poor OTA reception with Windows 7 Media Center but fine with other software and my TV

    I installed a new tuner (ASUS EHD3-100 dual ATSC tuners) into my Inspiron 518 (7 Enterprise, C2Q 2.4GHz, 3GB RAM, 640GB HDD, Radeon 5450 512MB, most recent drivers and updates installed).  Tried to set up the tuner in windows 7 media
    center and had to add the tuners manually.  It found all the stations I was looking for but many had only one red bar for signal strength.  If the stars line up correctly I can watch the stations with one red bar but most of the time I get an error
    message.  I even have one station with all green bars but Media Center still gives me an error when I try to watch that station.
    I then decided to use the software that came with my tuner (ARCsoft Total Media).  All stations came in with a strong signal.
    The signal used in both situations came directly (I unplugged the cable from my TV and plugged it into the tuner) from an antenna in my attic that has been connected to my TV (Pioneer PDP-4280) which shows a signal strength of ~60% plus for all stations.
    Pretty sure it's not a signal strength or quality issue because everything works fine with the TV and with Total Media.
    Would rather use Media Center because it seems easier to navigate and is easier on the eyes. 
    Any ideas on how to get the stations with only one red bar of signal strength working in Media Center?

    Have you ran the troubleshooter yet?
    If you're having trouble setting up your TV signal, try using the Set up TV tuner troubleshooter to automatically find and fix some common problems.
    Open the Set up TV tuner troubleshooter by clicking the Start button
    and then clicking Control Panel. In the search box, type troubleshooter, and then click
    Troubleshooting. In the left pane, click View all, and then click
    Set up TV tuner.
    Notes
    During the setup process, you might be asked to install a program called
    PlayReady. PlayReady allows you to play protected, premium TV content from your service provider in Media Center.
    If you receive an error while setting up your TV tuner—for example, a download error, or an error during PlayReady installation—you might need to go through the entire setup process again in order for your TV signal to work properly.

  • I have a hp pavilion media center tv m7750n desktop pc

    i bought Nvidia geforce 210, 512mb ddr2, pci-e 2.0, directx 10 graphic card. I installed but when i start the computer, the monitor does not get signal,  no signal in monitor screen". can you help me to fix that. thank you. i waiting to listeen from you. my Email is ([edited]).

    secar2014,
    Thank you for participating in the HP Support Forum.
    To protect HP Support Forum participants, our terms of use policy stipulates that you not publicly share your personal information, including but not limited to full names, email addresses and product serial numbers. Although it is also recommended that you not share this information privately, if you wish to exchange information with a specific community member, you might consider doing so in a Private Message (PM). Please refer to "How to Check Your Private Messages" for information on how to use this function.
    Respectfully,
    eric-g
    I no longer work for HP.

  • Compaq Presario Media Center SR2030NX Desktop PC

    can anyone help me. i have an older computer with windows xp.  i don't understand about drivers on drivers update page.
      http://support.hp.com/us-en/product/Compaq-Presario-SR2000-Desktop-PC-series/3239110/model/3245038/d...
    i do not know how to search the computer for the drivers  form this page
    my computer          model #SR2030NX          product#RJO36AA-ABA     serial#[edited Serial Number by Moderator]     software build#64NAemREA3
    hardware BOM#)Onx141100        softward BOM#NA68       service ID#022-515
    i also have the windows vista upgrade disks for windows vista on this  computer
    i  am just trying to get this computer running right
    piease help thank you for help nuvance

    Thank you for the additional information.
    The best thing to do is run HP Update if it is on your computer.  I would normal tell you to run Windows Upate, also.  However, Microsoft is no longer supporting Win XP.  Also, you can go through the drivers in the Software & Drivers section and install any that have a later date than the release date of the computer (13-Aug-2006).  Make certain that they match the hardware in your system before installing them.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • HP Pavilion Media Center m8020 PC Windows Vista Home Premium OS 6.1.7601.2.1.0.2561

    Event Name: Blue Screen, additional  info about the problem CB Code 116 BCP1 8892008, BCP2D 9518BE0,  BCP3 00000000, BCP4 00000002, No connectivity to internet, e mail, speakers, limited operation in safe mode black background.  What is the fix for this Blue Screen event?   Thanks,  bluebbb

    Hi,
    CB Code 116 usually refers to graphics drivers.
    Boot to safe mode, and uninstall current graphics drivers.
    Try booting back to Windows.
    Version  6.1.7601.2.1.0.2561 refers to Windows 7. Did you upgrade to Win 7 from Vista?
    If your PC will boot correctly after removing the graphics drivers you will have to reinstall the drivers required for either Win Vista or Win 7.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
    Errare humanum est.

Maybe you are looking for