HP Pavilion Media Center m8300f Hangs on boot
I have a HP Pavilion Media Center m8300f which came loaded with Vista Home Premium. About 18 month sold. Recently the computer would hang on boot up. I used the system restore and went back to a safe install. This worked ok until Windows added more patches which caused the same problem to occur again. After one or two of these episodes I was not longer able to return to a safe install. I ran the system recovery several times to check the hardware. Everything turned up good. Since I did not have a good set of recovery disks I decided to install XP on the computer and then upgrade to Vista. XP installed without a single problem. I purchased a NEW Vista Home Premium because I could later upgrade free to Windows 7. I tried to install Vista over XP. The process would start and then hang. So I reformated the hard drive using an external USB unit on another computer, replaced the drive and tried to install Vista off the DVD. It would not boot up. As a test using the Vista DVD I purchased, I upgraded XP on a separate computer to Vista. Worked very nice.
I ordered a set of the recovery DVDs and tried them. They would not boot up. I replaced the hard drive with a new SEAGATE SATA drive because I felt the connectors were not locking in. I still could not get the recovery DVDs to run. I went back to the XP and it installed. So here I am with a computer that willl not run or install Vista but will run XP. Also HP does not provide the XP drivers for the hardware on this computer.
Does anyone know why Vista will not install or how to get it on this computer?
I installed a NEW Seagate SATA hard drive for drive "C" because the connectors where not locking in place. rmated the hardI purchased the Recovery DVDs from HP and tried to reinstall it.
I had the same problem with computer halting with blue screens, black screens, etc. Motherboard had 6 capacitors with bulging tops. I found a replacement Nettle 2 motherboard from seller diypc2008 on E-Bay for the cost of $75.00 with free shipping. Installed new motherboard and computer works like new.
It appears like at around 2 years, this problem occurs from what I read on this forum. Look for capacitors on the motherboard with bulging tops. I fixed my computer by replacing motherboard after running many hours of diagnostics, replacing power supply, and changing out drives.
Similar Messages
-
Pavilion Media Center PC m7330n - 3gig drive support
I have a Pavilion Media Center PC m7330n and am think about purchasing a 3g SATA hard drive. The BIOS version is Phoenix-Award V3.47 (Core version 6.0) Do you think that my system will support a 3g drive? Thank you
Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor. And, your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
HP Pavilion Media Center m8200n Desktop PC Upgrades Tips and advice help.
Hello everyone I have a HP Pavilion Media Center m8200n Desktop PC that I'm looking to upgrade. Can anyone please advice me on the following topics:
Memory: What's the best possible memory that my system can hold I am currently running windows 7 ultimate 32-bits
Video card: I'm looking to upgrade to a decent video card with hdmi support that my system can hold I'm aware that i cant use certain video cards cause of my power supply capacity, upgrading the power supply can be a option. Can anyone please advice me on those topics It will be much appreciated thank you everyone I will be sure to rep and appreciate anyone's help thank you.
This question was solved.
View Solution.Hi chavinda546,
No you can't put an Intel i7-960 chip into the motherboard in your PC. You would end up replacing the motherboard, memory, power supply and processor. And, your HP recovery disks would not work so you would probably need to buy a copy of Windows 7.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Drivers for HP Pavilion Media Center a1530n
I am unable to find the drivers for HP Pavilion Media Center a1530n. I tried the auto detect feature but the software would not install. When i enter the model number, it says it has no record of this model. I need the drivers because I reformatted the hard drive and reinstalled windows but i do not have the driver disk for installation.
Hi,
Hope the following link is the site you are looking for:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3182805
Please select the right OS for your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HP Pavilion Media Center TV m7580.uk Desktop PC
Hello
I am experiencing problems with me desktop computer, when I turn on the computer and monitor, no information is displyed on the monitor. Electricity is still going through the monitor as displayed with the orange indicator light. Could it be the graphics card or the monitor that is not working? I am planning to plug in another monitor to see if it is the monitor that is not working properly. At the moment I can not afford to buy new hardware. Does anyone know what else I could do, that does not require me to buy new hardware?
Thank you.Hello @Raj2014,
I understand that you are having issues with the monitor on your HP Pavilion Media Center TV m7580.uk Desktop PC not displaying anything and it has an orange light. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
My computer freezes in Media center program, when I try to set up a TV signal, or try to run the FM radio feature. Do I have too many drivers loaded? Or, the wrong drivers? Can I check to see if my Infared Transceiver is working? Can anyone help me with this?
My first thought when reading your post ( video jerky) is that the CPU doesn't have enough horse power? What is the GHz of the AMD athlon? 1.8 GHz would be right on the edge with video. And where the computer will max out at 1 Ghz of RAM indicates the laptop is older and the CPU probably as well. 1 GHz of RAM maybe low on today's computers but would not be an issue if the CPU was perhaps 2.8 GHz. The audio is less demanding by far on CPU's than video, so that could be a codec?
-
HP Pavilion Media Center TV m7674n Desktop PC
Recently I've been getting a "no hardware found" warning when trying to listen to FM using Windows Media Center. I've opened the computer and made sure the tuner card was firmly in it's slot. That's worked up until today. Looking for a suitable replacement for my tuner card. Considering the Hauppauge WinTV PVR-150MCE. Would like to upgrade to HD, but not sure if my computer would handle it. Any advice? (note: this computer shipped with 2g of memory, but I upgraded it to 4g).
While that hardware is fairly old, it might be OK with a new video card.I did find THIS ON A DIFFERENT THREAD where the poster claims to have sovled the problem, however. Yes, I confirm that if you download the latest NVidia driver 309.08 from their website and update the Windows Basic Graphic Card Driver with it by extracting the downloaded file to a location and "Browse" to it from the Driver Update from Properties, Windows 10 works perfectly on my old Dell Vostro PC with an NVidia 7300 Le Graphics card.
-
Can I download recover disc 2 for HP Pavilion Media center 2005 edition
I had to recovery it and I could not find disc 2 and disc 1 has loaded
It is not possible. Recovery disks are created to match the system's installed applications and OS.
You can purchase a new set from:http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv6125se&bkm=Results#Results
435337-001
Operating System:
Windows XP Media Center Edition
Number of CDs:
$27.00
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Audio on Pavilion media center
I have lost all sound on my Pavillion media center, I have tried everything nothing works, it says no speakers plugged in even thought they are plugged in correctly. now the tech tells me the audio port is corrupt. Does anyone have a suggestion other than getting a new computer.
What model HP PC and operating system are you using? Perhaps an updated audio driver would help.
How to Find the HP Model Number
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
One short beep and one 1 beep on hp pavilion media center 8120n
My tower is not booting up when I turn it on. My son took the side off and was going to put more memory in it for me, but in the end he didn't. He put the old memory back in and put the side casing back on. Today, when I turn it on, it has 1 short beep and 1 long beep. It just won't boot up. Can anyone tell me what I need to do to get it back up and running?
This question was solved.
View Solution.RBurke, welcome to the forum.
The BIOS Beep Code that you are hearing is caused by a memory problem. Here is a guide that will help solve the problem:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07107
You should read the entire page. The beep codes common to HP computers are toward the bottom of the page.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Event Name: Blue Screen, additional info about the problem CB Code 116 BCP1 8892008, BCP2D 9518BE0, BCP3 00000000, BCP4 00000002, No connectivity to internet, e mail, speakers, limited operation in safe mode black background. What is the fix for this Blue Screen event? Thanks, bluebbb
Hi,
CB Code 116 usually refers to graphics drivers.
Boot to safe mode, and uninstall current graphics drivers.
Try booting back to Windows.
Version 6.1.7601.2.1.0.2561 refers to Windows 7. Did you upgrade to Win 7 from Vista?
If your PC will boot correctly after removing the graphics drivers you will have to reinstall the drivers required for either Win Vista or Win 7.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est. -
HP Pavilion Media Center M7690Y PC. Windows 7 32-bit.
After the system has been on for a short time and is not running a program the computer will freeze/lockup and I must power down and restart. This happens all the time. Is there any solution for this?
Check the inside of case and see if it is dirty, dusty, etc.
If the RAM chips have dust on them, your system needs a good cleaning.
Be careful with a vacuum because of static electricity from the hose.
If your system is clean, you may have a hard drive starting to fail.
See if F-10 has an option on your system at boot up.
If it does there may be a hard drive utility to check your drive and other hardware. -
HP Pavilion Media Center m8200n Desktop PC/ recovery disks FAIL
I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?
thekissfan wrote: I had to replace a crashed hard drive. BIOS shows that it recognizes the new drive. Can NOT boot system. Error message says disks (obtained upon purchase of computer) do not belong to this pc. What? I'm under the impression that it should not matter if this is a new hard drive.....the motherboard is what recognizes the recovery disks. Is it possible that I have the wrong disks? Or is this a big scam?
Hello thekissfan, Sometimes the HP Recovery Restore disk will not work on a new unpartioned and unformatted hard drive.
The hard drive would need to be prepared for the HP Recovery Restore disk.
The new hard drive would need to be partitioned, and formatted, and then the HP Recovery Restore Disk may work.
This is a fairly common issue. If your new hard drive came with a CD, you may be able to use the CD to boot the system and prepare the new hard drive.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem. -
HP Pavilion Media Center M7680Y PC
After installing Windows 8.1 Pro my video only works for a couple of minutes, then the screen goes black and I lose all sound and video and I can't get back in until I cut off the master switch and then turn it back on. If my video card is bad, what video card will work with the new 8.1?
Hi,
CB Code 116 usually refers to graphics drivers.
Boot to safe mode, and uninstall current graphics drivers.
Try booting back to Windows.
Version 6.1.7601.2.1.0.2561 refers to Windows 7. Did you upgrade to Win 7 from Vista?
If your PC will boot correctly after removing the graphics drivers you will have to reinstall the drivers required for either Win Vista or Win 7.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est. -
I have a hp pavilion media center tv m7750n desktop pc
i bought Nvidia geforce 210, 512mb ddr2, pci-e 2.0, directx 10 graphic card. I installed but when i start the computer, the monitor does not get signal, no signal in monitor screen". can you help me to fix that. thank you. i waiting to listeen from you. my Email is ([edited]).
secar2014,
Thank you for participating in the HP Support Forum.
To protect HP Support Forum participants, our terms of use policy stipulates that you not publicly share your personal information, including but not limited to full names, email addresses and product serial numbers. Although it is also recommended that you not share this information privately, if you wish to exchange information with a specific community member, you might consider doing so in a Private Message (PM). Please refer to "How to Check Your Private Messages" for information on how to use this function.
Respectfully,
eric-g
I no longer work for HP.
Maybe you are looking for
-
I don't want to start a discussion I just want to install...
I am sooooooo p****d off with Adobe. They have forced me to type my problem into a form three times and each time I press submit it disappears and I have to join/sign into/whatever their 'community'. My problem is that trying to install Flash/Reader
-
After installing IOS5 the music is not syncing correctly to the iPhone.
All the songs used to play correctly, however now some do not play on the iPhone and some no longer play in either iTunes or the iPhone. Any ideas?
-
Wish to update to 7.1.2 need to backup correct? I select settings iCloud sroage
wish to update to 7.1.2 need to backup correct? I select settings>iCloud>storage & backup and my iCloud backup switch is gray. why?
-
Defective ports on SG200-18?
I have two SG-200-18 that seemingly only works with GE17 and GE18. I've factory reset both, plugging a DHCP server into GE1 and waiting, no leases obtained from DHCP. Pinging 192.168.1.254 times out. Disabling DHCP server, and moving to GE17 makes 19
-
Will not print due to poor photo quality
Tried to print coupons, but, my Envy printer would not print them due to being "too low in quality to print with good results". How/Can I override this, so that I can print these coupons?