HP Pavilion Notebook 2000-2b19w​m

A few months back my year old computer stopped booting up out of nowhere. It powers on, shows the HP symbol, says please wait, then when those go away and it seems like it's gonna go to the log in screen but doesn't and just stays at a black screen. The backlight is still on though, because i can move the mouse around. What can I do or what is at least wrong with my computer?

Hi,
Shutdown the notebook. 
Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive and Memory.
Post back with the results including any error codes that may be generated.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • HP Pavilion g6t-2000 CTO Notebook PC upgrading from i3 to i7

    Hello, I have a HP Pavilion g6t-2000 CTO Notebook PC with a Intel(R) Core(TM) i3-2370M CPU that I would like to upgrade to an i7.  Is this possible?  And if so, what processors should I be looking for?  Thanks for any info in advance. 
    This question was solved.
    View Solution.

    Hi EHolmes:
    Thank you for your query.. I am please to provide with that information!
    I am sending you a link to the Maintenance and Service Guide  click here. If you click on product description, on the left, under Processors. on the right, is a list of compatible one for your unit.
    To answer your question directly, no an I7 is not compatible.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Pavilion Notebook Hard drive replacement boot problem

    Hi .. hoping for help...
    Just purchased a zv5000 pavilion notebook with a bad hard drive ....
    Replaced hard drive with a western digital 160 gig ... 
    When I try to boot with the original application and driver Recovery DVD, I get the following message ...
    Intel undi, pxe-2.0 (Build 082) Copyright 1997-2000 Intel Corporation.
    For realtek RTL8139(X) 18130/810 PCI Fast Ethernet Controller v2.13 (020326)
    PXE-E61: media test failure, check cable
    PXE-MOF: Exiting PXE Rom ...
    This is as far as I can get and the message just repeats ...
    I have gone into set-up andmade sure I am booting from the CD Rom drive, but still have same problem. 
    Can anyone tell me what I am doing wrong ?
    Thank you for any tips ... have a great day
    Sam
    This question was solved.
    View Solution.

    I have not replaced my hard drive on my Pavilion notebook, but I am getting the same message when I try to turn on my computer.
    Intel UNDI, PXE-2.0 (build 082)
    Copyright (C) 1997-2000   Intel Corporation
    For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
    PXE-E61:  Media test failure, check cable
    PXE-M0F:  Exiting PXE ROM.
    What does this mean?
    Did you find an answer to this problem?

  • Help Me with Hp Pavilion dv6t-2000 , I Can't Use The Modem

    Help Me with Hp Pavilion dv6t-2000 , I Can't Use The Modem Coz A Metal Cover it  in my laptop !!

    Hi,
    Which port(s) are you talking abot ?
    Figure 3: Back I/O ports
    1 - USB 2.0: 4
    2 - LAN (ethernet)
    3 - DVI-D
    4 - DVI-I
    5 - Audio center/subwoofer
    6 - Audio rear speaker out
    7 - Audio side speaker out
    8 - Audio line-in
    9 - Audio line-out
    10 - Microphone
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have a HP Officejet Pro 8500A that stopped printing from my HP Pavilion notebook.

    I have a HP officejet pro 8500a printer that has stopped printing. It will not print anything off of my HP pavilion notebook and I just found out that it will not copy anything either. Does anyone know what the problem may be?

    HI @anewleaf , and welcome to the HP Forums!
    I see you're running into copy and print issues.  I'd love to help!
    I have a few questions before we get the ball rolling:
    Are you using Windows or Macintosh?
    If you are using Windows, is it a 32-bit or a 64-bit system?
    Do you recieve any errors?
    Is the printer not printing any pages, or printing blank pages?
    I'm including documents that will help you find the system info:
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Trouble with hp pavilion dv 2000

    I have a HP Pavilion dv 2000 (S/N 2CE71620R9, P/N RV325UA#ABA) that when I turn it on the hard drive does not function and the monitor remains dark (does not function),even when I press F4 many times.  Also, when I put a CD or DVD in the DVD player the hard drive starts, the hard drive ligth turns on and the DVD player turns on for a short time (1-3 seconds) and the computer shuts dowm.  
    I tried starting it with AC and DC power With the same results.  To make things worst, I did not make any recovery discs and I lost the Windows DVD (Vista).
    How can I start the computer and get it to work.

    Hi,
          Use the steps as listed in the below links:-
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01997899&tmp_task=solveCategory&cc=us&dlc=en&lc...
    Also you can run a test on your HDD using the below link
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&lc...
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • My hp notebook 2000 wont startup

    when i try to start my hp notebook 2000 it goes to automatic repair and cannot complete that and says errorr. I have windows 7 operation system on a flash drive and I need to know how i could re install windows on the computer. The screen is cracked and I do not know how to connect it to my monitor being able too would greatly help me to fix the computer.

    Hi Sk8forlife,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 2000 Notebook and needing to connect a monitor. Here is a link to connecting a monitor.
    You should be able to restore the Windows 7 using system restore.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Installing Windows XP on HP Pavilion Notebook with Free-DOS

    Today I spent 7h in unsuccessful attempts to install WinXP on my new HP Pavilion notebook. The problem comes from the fact that there are no SATA drivers installed for the HDD and everytime I try to boot>install Win>... it fails. WinXP gives me 0x0000007b error. If anybody could help me I'd be really grateful. I tried Win7 as well, but it fails also. A friend of mine who is rather "into" the whole Software/Hardware business suggested that I try to make a new WinXP 7 with the program nlite and try to add the necessary drivers to it. The problem is I simply can't find which drivers I need. Anyways. I'm open to any suggestions. Thank you all in advance!
    P.S.When I enter BIOS I can't change anything as the BIOS doesn't show any HDD device, no SATA, nothing.

    Hi:
    There are thousands of models of HP notebooks all with different hardware.
    If your model is a new model with an amd processor you can forget it.
    If your model is a new model with an intel 4th generation core processor or pentium n or j processor you can forget it.
    The only way you will get XP to install on a new notebook is if it has an Intel 3rd generation or older core processor or an Intel series 7 or older chipset.

  • How to know if my HP Pavilion Notebook can support Super Multi Blue-Ray drive?

    Hi,
    My HP laptop is:
    HP Pavilion dv6-6093ex Entertainment Notebook PC support
    LM610EA#A2N
    How to know if my HP Pavilion Notebook can support Blue-Ray drive?.
    I need to install a Super Multi Blue-Ray drive, with these capabilites::: read and write all types of disc formats in one convenient package: CD±R, DVD ±R ,  CD±RW, DVD±RW, CD-ROM, DVD-ROM, DVD-RAM and Blu-ray disc.
    If it can support, then I must purchase HP Blue-ray device, or I can purchase any other brands, such as  LG 16x Internal Blu Ray/DVD/CD Burner Writer Drive + sata data & power cables .
    First of all: my Optical drive is: LightScribe SuperMulti DVD±R/RW with Double Layer Support, and with the capabilities
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R, CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id 1
    Status OK

    Anyway, Could you please confirm for me this the Maximum resolution of my VGA is 1366 by 768 pixels, and cannot be extended.
    That is correct.  It cannot be extended.  That is the limit for the built-in display.  Using an external display that is capable of higher resolution might help in that matter but then you loose the portability of the laptop.
    I came across a free BluRay player just this week, it is found here. Leawo Blu-ray player: http://www.leawo.org/blu-ray-player/
     It is the only free BluRay player I have found.
    That is about all I can do to help.  The other possibility would be to get an external Bluray drive that can fulfill all your  expectations, give you lightscribe, and possibly a BluRay player included with the purchase.  It would be much less worrisome on your part and there would not be any modifications to the laptop.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • KeyBoard Problem HP Notebook 2000 PC

    Im not quite sure where to put this but hopefully someone can help. Last night I was on my Hp notebook 2000 laptop pc and it was working perfectly fine but today I hadent gone on it all day and wanted to go on it. So everything loads up correctly and than i type in my password and go onto Youtube. So im watching a video and notice the volume is at 0 so i press the key to up it. I didmt notice anything till the video stopped playing. I was on Airplane mode for some reason. So i try to un press it and then up the volume same thing. So I thought maybe something glitched and i should shut off my laptop and try again. Everythibg loads up fine but i get to the password and i press the letter "T" I get see 5 black dots instead of 1. I try to back space it just adds another dot. So I use the on screen keyboard and use it to log in. I click on my browser Firefox I go to type in a letter I get basically a jumble of letters and this is happening to all of them. I try to backspace it gives me "/". So im confused as what to do to fix it. I didnt mess with it or damage it, it was working fine yesterday. Can someone please help me and try to give me details of this problem and how to fix it.

    According to the message you have recently posted I would like to confirm that this is a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
    You can also Check your warranty Here to verify the warranty status
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Forgotten password to log in my hp notebook 2000

    does anyone know how to get into safe mode on my hp notebook 2000   It will not let me long in with my password it says incorrect password plus the e mail address it shows upon start up in incorrect

    Hi jcagle,
    You can go into safe mode by going to the shutdown option >> by pressing the shift key and clicking the restart option >> wait for it to load >> troubleshoot >> advanced option >> start up setting >>  click restart >> click option no. 4 to boot into safe mode.

  • HP Notebook 2000 cooling fan issue

    Hey, everyone. I've had my HP Notebook 2000 for a few years and I've discovered my first major issue just a few days ago when the cooling fan stopped working. I don't really mind it too much because I have a USB-powered cooling fan that my laptop rests on, and it does a pretty good job. My entire laptop remains at about the same average tempurature.
    The biggest issue I'm having is every few hours, the laptop will automatically shut off because of it.
    As well, when I boot it up (turn it on), it gives me a reminder that the cooling fan isn't working and I will have to press "enter" or the laptop shuts off in 15 seconds.
    How can I make it so the laptop ignores the broken cooling fan? I don't want to spend the money to repair it because I can rely on the USB-powered cooling device.
    Thank you!
    ~Mark
    This question was solved.
    View Solution.

    No you can't. Reason it probably shuts down is because cpu temps peak over safety threshhold at times thus it shuts down to prevent damage.
    Cooling systems on hp's are not the best when working so thermal stress on cpu,gpu & mainboard will be bad & failure failure will occur quite quickly.
    Fan assembly is very cheap & can be done DIY if you have some skill in dismantling these sort of things & following hp service manual & other online guides.
    I expect a new fan & new thermal paste & shimming along with cleaning would do wonders for running temps & long term health of the notebook.
    Like my post? Click Kudos (thumb+) to show appreciation.

  • Do I have a battery charge problem? HP Pavilion Notebook - 15-p258na (ENERGY STAR)

    Hi all, I bought a  HP Pavilion Notebook - 15-p258na (ENERGY STAR) just yesterday, charged it fully. I notice that even after a full charge the batterly does not last very long. Perhaps two hours at most. I have had laptops in the past that can use battery power for much longer. 
    At 88% battery life the laptop has approximately 1hr 30 mins left. Just a few minutes later I check back to the battery icon at 76% charge and it has 2 hours 22 mins left (I have not stopped running any programmes on my laptop). 
    Update: Has 3hrs 1 minute charge at 66% power remaining
    Update: 2hrs 24 minutes at 65% power
    Is this usual for a HP? Never had one before and am so far not won over  

    Hi @lucyjoanne87 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 15 p258na Notebook  and getting an error on the battery information. Try performing a hard reset.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    This is usually cause by needing an update. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating.
    Here is a link to test and calibrate the battery.
    If this does not help you might need to call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Microphone not working on dv7 Pavilion Notebook (Windows 7)

    The microphone on my dv7 Pavilion Notebook is not working.  I checked the sliding volume controls and have tried updating my drivers.  A few weeks ago, I “unchecked” a few startup items using msconfig.  Is it possible, I “unchecked” an item related to the microphone?  Please advise
    In addition, I tried updating the CyberLink YouCam software, but I am unable to uninstall the existing software in order allow the updated software to properly install.  When uninstalling the program, I receive a “1628 Fail” notification.  Is there another way to force the  un-installation of CyberLink YouCam? 
    Pavilion Notebook dv7
    Operating System:  Windows 7
    Product Number:  A1L75AV
    Serial Number: [Personal Information Removed]
    Thank you in advance.

    Hi,
    First, regarding the microphone problem, try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58001-58500/sp58226.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again before cheecking if the microphone works.
    Regarding being unable to uninstall Cyberlink Youcam, see if you can remove it using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Recovery to factory setting on Pavilion g6-2000 does not work

    Would like to restore to factory settings so I can return it.  Only two weeks old.  Crappy Ralink wireless network card.  Now I can't get it to do the Recovery from the Hard Drive, the Recovery Discs I created, or using F11.  All result in the Blue Screen of Death.  Error message is No_Exception_Handling_Support.  Stop code: 0x0000000B.
    Tells me to disable cacheing and shadowing in the BIOS Memory section, but I don't see how to get to that.
    I used the earliest restore point I could find.  No improvement.
    Changed upgraded bios ver F.24 to the previous F.22 and used the previous Ralink wireless driver (these were changes made per HP instructions trying to resolve the lousy performance of the Ralink wireless adapter.)
    I can't figure out how to get by the Blue Screen of Death.
    Appreciate help and/or suggestions.
    My Pavilion g6-2000 is running Windows 7 Professional.

    Hello bonnyjean9,
    I see that you are having issue with running a recovery on your HP computer. I would like to help with this issue but I need some information.
    Can you provide the product number of the computer? Here is a link showing how to find that information.
    I would suggest testing the hardware. You can do that by following these steps:
    Turn the computer on
    Immediately tap the "Esc" key
    Select the option "System Diagnostic"
    Run all the hardware tests
    Let me know what happens.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • ABAP Mapping - Can it be made simple?

    Hey mates, I'm looking at the ABAP mapping option for transforming source format to target format. I see that we need to have class implementing IF_MAPPING and implement the method EXECUTE and then parse the source message, process it and render the

  • SQL Statement in Webi 3.x and Webi 4.x

    Hello experts, I am facing with a problem regarding an SQL Statement written in Query Panel as a Custom SQL. The bellow statement is executed in Webi 3.x but not in Webi 4.x.. Webi 4.x does not recognize the statement from line 4 (SELECT within a SEL

  • TSV_TNEW_PAGE_ALLOC_FAILED  with internal table declared with occurs 0

    HI guys, when the internal table is declared as occurs 0, the dump TSV_TNEW_PAGE_ALLOC_FAILED is encountered, when changing the declaration into standard table, th dump disappears. Why is this so? Thanks!

  • How to create s cutomised function module

    Hi all, i want to create acutomised fm , i want to create a zfm , same as like one standard fm . how to copy the original one, i wnat to change one include based on customer requirement. Regards, pandu.

  • ORA-01017: invalid username/password; logon denied in Standby Server

    Hello, In Standby Server , when executing logs applying process it shows an error. It happens suddenly Now logs from PRD to standby is not applying. Error log is as follows: BR0002I BRARCHIVE 7.00 (42) BR0006I Start of offline redo log processing: ae