HP Pavilion P6-2220t. All security USB connections are shut off in BIOS. Need to turn on.

I was told that all of the Security USB connections was shut off in the BIOS. The only controls for this PC is USB ports for the mouse and keyboard control ect. How can I get into the bios without the keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is USB connections only. Again If I can, somehow get get into the BIOS I can turn the Security USB connections on as they should be.

Hi Big_Dave,Yes the ALL security USBs in the Bios are in fact shut off. I saw it done in front of me.The person was trying to install Windows 7 but the usbs in the bios stopped workingeach time he tried the install the software. He thought that shutting off the securityUSB in bios would stop the security only and allow windows to be installed. He thensaw that all the security USBs in bios had completely shut down the usb connectionscompletely. I didn't know that is what he actually done until he went through with meand told me everything that he had done step for step with me. Then it dawned onme that was in fact what I saw him do. Anyway the Security USBs are all shut off.Money is hard to come by here so it will remain disabled until someone can walk methrough getting it turned on somehow without working usb connections. I refurb.laptops but not PC desktops like this one. This is new to me also. I think I will stick torebuilding laptops after we figure out how to get into the back door or find a way tohelp[ him fix this problem if I can. Anyway thank you for your input into this problem.

Similar Messages

HT1145 I am setting up my Time Capsule for the first time, all of my connections are right but, AirPort is not recognizing the Time Capsule or my network!

I am setting up my Time Capsule for the first time, all of my connectiions are correct but, AirPort Utility is not recognizing my Time Capsule or my network?

Try connecting your iMac to the Time Capsule with an Ethernet cable to see if that allows AirPort Utility to "see" it.

C7280 All-in-One connected wirelessly to a modem-router needs a password when powered-up.

Do you have any examples of wirelessly connecting an HP Photosmart C7280-All-in-One to a network run by a NetComm NB6Plus4W modem-router? The modem-router also attaches a Windows XP desktop computer using an ethernet cable and a Windows XP laptop computer wirelessly using the default SSID (wireless) and password (a1b2c3d4e5).
The wireless connection between the modem-router and the laptop comes up automatically when the modem-router and laptop are powered-up.
The wireless connection between the modem-router and the HP Photosmart does not establish automatically. When I power-up the HP Photosmart I then have to use the setup button on the Photosmart and manually type in to the Photosmart the password (a1b2c3d4e5). The SSID displays as wireless, it does not have to be retyped.
Do you know if there is any NetComm or HP configuration which will cause automatic setup of the HP Photosmart to occur when it is powered-up?
What I am complaining about is having to manually type in the HP's password to the HP whenever the HP is powered-up.
This question was solved.
View Solution.

The information that i gave was based on the info you provided, and only told you what steps would work. Troubleshooting process does involve guesswork as the issue that you're facing could be caused due to many reasons, and doing each and every step is a process of eliminating all the possible causes and narrowing it down to one particular cause. If you don't like what I have to offer, then feel free to not follow it. Lets see how fast you can get it to work on your own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I have the same problem as brnskdy i installed the latest update and can't connect to shop or server. windows 7. all other internet connections are ok

i can not access itunes server after update to latest software

Thank you all for these answers but none of the above worked...
I forgot to mention but I run on a windows 7 64bits os.
However, I uninstalled and installed again several times, nothing is getting better.
- java -version is not recognized, but this tool detects my version : http://www.java.com/en/download/testjava.jsp
- In java console, proxy are disabled and I tried to clear the cache --> no improvements
- I did not tried 1.5 only 1.6 but several updates. No improvement either.
Is someone accessing ESR/ID from windows 7 64bits ?
Is there any other tools to install appart from JRE ?
Regards,
JB.

My Ipad2 was working fine until i did the update this morning. Now all my internet connections are Very Very slow.

the icloud was not able to update because my information was different than apple.

now that i cleared up the icloud problem, how to i redo the software update?

USB, Firewire Suddenly Shut off/Deactivated

Hello,
I recently tried to attach a La Cie hardddrive to the back of my cinema display and a message came up:
+*A usb device is currently drawing too much power.*+
+*The hub it is attached to will be deactivated."*+
There is no hub but now none of my harddrives will mount onto the desktop. I have no idea or experience with this and I can't work now. Please help quickly.
My display is attached to a G5 Tower.
Al

Hi! You should only attach hard drives directly to the motherboard or a powered hub other than a monitor. The over current has tripped the ports. It needs a pmu/smu reset. On the early G5's there is a button on the motherboard that has to be pressed once with all external cables unhooked and on the later ones unplug everything and let it sit for 30 minutes. Tom
http://support.apple.com/kb/HT1436?viewlocale=en_US

HT4628 i have a macbook pro which an you help me?shows the wifi bars with an ! in the middle, all my other devices are working off the network, c

I have a mac book pro with an ! in the wifi bars, all other devices are connected to the net work, cannot connected to a hot spot, can this issue be fixed

You could try this:
Apple menu / System Preferences / Network.
Here select Wi-Fi on the left, and click the Assist me... button on the bottom, then click Assistant.
Follow the directions on the screen.

All of my photos are gone off my iphoto, where are they?

All of my photos, events, everything is missing off my iphoto. Where has everything gone?

Gee. I have no idea. What version of iPhoto and of the OS do you have? What recently changed? What do you see? What error messages do you get? What else can you tell a total stranger that might help them assist you
And you really need to purchase an external hard drive at least 2 1/2 times as large as your hard drive and start using Time Machine or another backup program of your choice. With no backup you will lose all of your files and photos sooner or later
LN

HT201263 I tried to update my iphone 4s to the iOs 6.1.1 and now its on recovery mode and I cant restore it because i changed my email adress and all my data had gotten erased. I just need to turn my phone back on and use it again without all the data

It keeps saying my iphone is in recovery mode and I cant restore it. It just tells me there's an error and cant be done. I just want to be able to turn my iphone back with the data or without it

Sorry. You're not making much sense. What is the exact error you're getting?

My wireless connection keeps shutting off in Mavericks

Is there a workaround that a layman can do?

Hi, JSerembe.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

IPhone 4.1 USB connection in vehicle?

I just downloaded 4.1 and every since then I have a USB direct connect in my GMC Sierra it always played the audio from the Iphone and since doing that it has not been able to read it, anyone else having the problem?

Seems to affect all direct USB connections. Have a 2010 Lexus RX350 w/ Mark Levinson stereo. Since updating 2G 64GB iPod Touch from 4.0.2 to 4.1, audio playback is clipping/crackling and muddled. I also have occasional synch problems where the iPod isn't recognized or I cannot FF songs via steering wheel controls.
Also noted by others here:
http://www.ilounge.com/index.php/news/comments/ios-4.1-causing-in-car-usb-playba ck-problems/
C'mon apple. Get it together and test better. Doesn't make much sense to affect core functionality with an update.

N78 USB CONNECTIVITY PROBLEMS

Hy guys,
Since i've bought my N78 i've been able to connect the phone via cable only one time. After that, every time i've tryed to connect my n78 via cable my computer doesn't recognize my Phone.
When I plug USB cable in one of the USB ports, Windows XP gives me back an error that says "USB devices not recognized - One or more devices connected to the computer has not worked correctly. Windows is not able to recognize it".
I've reinstalled PC suite thousands of times,but nothing changes.
My phone has the 12.046 software version. I know that there'e a newer version but how I can update it if my PC does not recognize the phone, and hence, PC suite is not able to connect to the phone.
Many thanks for you help
m

you have another option in updating via Firmware Over The Air. you can do this by entering *#0000# in the standby screen and selecting Options > Check for updates. if an update is not available over NSU, then it may be on FOTA instead for your product code. this method of updating only takes about three to five minutes anyway. remember to do a hard reset (three-finger hard reset) after updating your phone to the new firmware.
so you can probably update from 12.046 to 20.149 or 21.002. USB connectivity problems are probably due to problems with the USB cable or the computer, i have had no problems at all with USB connectivity in all the time i've had my N78, even under 12.046 firmware.
let us know how it goes.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

SQL developer drop all my network connections

Hi all,
I have used different versions of SQL Developer and I have read many forum posts but I cannot find solution for my network problem.
I can connect to my databases without any problem, but when my session goes to snipped state (due to idle_time setting) after some time ALL my network connections are dropped (e.g. my mail client give me message that cannot connect to the server, my ftp client session is dropped, my ssh session are dropped...). It is horrible because sometime I need connect to my PC remotely and due to this problem I cannot. It is not problem of my PC, I have used 2 different PCs and all is the same. If I don't start SQL Developer, I can have ssh session open for week without any problem.
Last year I used to start keepalive extension, but is really annoying for every oracle session manualy enable keepalive.
And when I open 10 db sessions and for one session I forgot click enable keepalive then all my network connections are dropped.
Yesterday I have installed current version of SQL Developer hoping that the problem is solved but today morning I find all my network sessions dropped (e.g. I need 8 ssh sessions reconnect).
Does anybody have any idea how to solve this?
Thanks.
Marian

Hi Marian,
I am not quite sure how using SQL Developer could make all client software accessing the network lose their connections. Do you use some kind of VPN (Virtual Private Network) software? Do you always try to use SQL Developer with the non-Oracle KeepAlive plug-in?
Maybe local policy imposes some limit on the total number of simultaneous connections (active or inactive) you can have, and it gets exceeded only when you run SQL Developer. Are any other application clients used to access databases from your machine(s)?
If the real network connection is stable, typically one need only worry about database session time-outs (idle limit reached) or VPN time-outs. I suggest asking for help from someone inside your organization responsible for networks. It seems like something is forcing a VPN disconnect.
Regards,
Gary
SQL Developer Team

USB connection unstable

My USB connections are unstable. They randomly cut out, regardless of which port or what device is plugged in. My mouse and keyboard will stop working out of the blue. My USB microphone will stop working in the middle of a video chat or recording a narration. Sometimes I have to reboot to solve this. At other times I can just put the laptop to sleep and wake it back up and I have USB functionality again. The problem seems to be getting more frequent. Is this a software or hardware problem? What is the fix?
Laptop: HP G71 Notebook PC
Running Windows 7 Ultimate 64-bit Service Pack 1

Hi Ross,
Please let me know the results of reinstalling the drivers. If it didn't work, take a look at this document, which provides the steps to use Recovery Manager to restore your software and drivers.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

MacBookPro not recognizing USB connections

Since I uploaded Maverick v 10.9.3, none of my USB connections are recognized. Not seeing 'devices' in the finder. Whassup?

Hi janep512,
If your USB devices are not showing under Devices in a Finder window, please check the Finder menu > Preferences > Sidebar tab as described in this article -
Mac Basics: The Finder
http://support.apple.com/kb/HT2470
See section 8.
Thanks for using Apple Support Communities.
Best,
Brett L

HP Pavilion P6-2220t. All security USB connections are shut off in BIOS. Need to turn on.

Similar Messages

Maybe you are looking for