HP Pavilion p6, hangs on post with new grafik card Nvidia GTX750Ti

Hi, i have an p6-2056sc, with a new grafik card gtx750ti (nvidia) hangs on post screen, i have updated the bios to the latest and change the PSU to an 430Watts, but still it won't boot, the card works in another pc so it seems ok, so what could be wrong ? if i put the old graficcard back it works again.

Hi,
Did your PC ship with Win 8 or Win 7?
Your power supply seems to have enough power to run the card. Are all internal connections for power being made to the graphics card? Some graphics cards need additional four or six pin power connections to run the card.
The only other thing I could think are is "secure boot". If your PC shipped with Win 7 that should not be a factor.
The motherboard slot you are connecting the graphics card to should be enabled in BIOS (you are using this slot for your old card) so that should not be the problem.
Here is a guide on selecting graphics cards written by a very knowledgeable forum member. Maybe it will help.
I am out of ideas??
Jaco
Errare humanum est.

Similar Messages

Pavilion P6-2326s Power cycling with new graphics card

Hi, I just got a Pavilion P6-2326s from a friend that didn't want it anymore because it was broken. I know a little about PCs so I thought i could fix it and have a spare. It would fire up and run but no video. I figured onboard video was dead and ordered a new cheap video card(EVGA GT610 1GB). I installed it and and no go. the pc just cycles through starting for 3-4 seconds, stops, starts again for few seconds and goes again. It will keep doing this forever or until I hold in power button to shut down. I thought maybe vid card was drawing too much juice, so I removed power supply and put in a known good, 550 watt that I have. Same deal with the start, stop sequence. Tried removing, replcing battery to refresh CMOS in BIOS. Same result with start, stop sequence. Is it safe to assume that Motherboard is probable fried? One othe note, when I got the PC and opened it up, it was the dirtiest PC I have ever seen. It was really caked up with dust and webs. Any ideas out there? Thanks in advance

You would definitely need to remove the add on video card in order to change the BIOS settings, but if you don't have any video with the video card removed, then you still can't see the BIOS settings, and you are pretty much out of luck.
You would probably be throwing good money after bad unless you can find the same motherboard on eBay in used but tested and working condition at a very reasonable price.
Here are listings of the motherboard your model uses. They may be from different model PC's however that use the same motherboard and again, you may not be able to use W8 because if some of those motherboards came from models with W7, there won't be a W8 product key in the BIOS.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XH-Joshua-H61-uATX+...
Then there might be a problem with getting Windows 8 reactivated since the motherboard was changed even if you do manage to find one that came from a PC with W8.
If it were me...This would be a case where I would strip it for parts, and toss the rest of it out.

How to change payment method with new credit card details. Not able to change current one as card has expired. Pl help

I want to change my payment method with new credit card information as current credit card has expired. But when I try to change payment method , returns your payment method is not valid or allowed and continues to prompt to change the same. But when I try to update with whew credit card number, it doesn't accept and continue to refuse the payment method.
This problem is not allowing me to purchase of any kind either paid or even free as well. Doesn't allow to even purchase free books even
Please help to solve the issue
Thanks
Dpvora
India

You need to contact Apple Support for this kind of problem.
http://www.apple.com/support/contact/

WHICH CARRIERS WILL ALLOW ME KEEP MY PHONE NUMBER WITH NEW SIM CARD?

WHICH CARRIERS IN USA WILL ALLOW ME TO KEEP MY PHONE NUMBER WITH NEW SIM CARD ON AN IPHONE 5S?

thank you.
i did not know that it was different from normal writing where one might use all caps to cull the attention of the public---as in a newspaper advertisement selling an item and the caps would be intended to make the ad stand out from other advertisements. i'm old school i guess but im learning & i thank you.
Did not intentionally try to yell at the readers. Hope i didn't wake anyone up!!! Again, my apology. Thanx.

I have downloaded whats app/brave temple run but using netsafe card. well now it shows 1.98$ is pending , though m trying with new netsafe card to pay it is showing error saying Pls select valid method for payment. i used same method as i did earlier

i have downloaded whats app/brave temple run but using netsafe card. well now it shows 1.98$ is pending , though m trying with new netsafe card to pay it is showing error saying Pls select valid method for payment. i used same method as i did earlier

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Problem with new graphic card Geforce GT 610 installed in HP Pavilion a6710in

I have recently installed the nVidia GeForce GT 610 graphic card. The problem faced by me is especially during playing games, the screen goes black and PC restarts but it works fine with rest of the things. I have disabled the integrated video card as would be if new video card is installed. The problem is still unclear... so please if anyone can help me out with this...

The GT 610 requires a minimum of a 300 watt system power supply and your computer came from the factory with a 250 watt power supply. When playing games, it is very possible that the card draws more current than the 250 watt PSU can supply. This would cause the computer to crash, go blank, and/or reboot. Please upgrade the power to at least 300 watts.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Z68A-GD80 Wont post with new GPU.

I have two working Asus 7970 Matrix cards that my PC wont post with them in. All power connectors plugged in, tried two different PSU's a Corsair HX850 and a Corsair AX1200i. Tried both PCI-E slots on the motherboard with both cards.
The cards work in a second PC however, so it seems like its the motherboard.
No display signal, no beeps, no post.
Also, the system posts and works fine with a GTX 590 instead of the Asus 7970, and Sapphire's 7970 works fine as well.
i7-2600k
MSI Z68A-GD80
Corsair AX1200i / Corsair HX850
Asus 7970 Matrix
Corsair Dominator Platinum 4x4gb 1866

Hello Svet, even it has been posted more than one year ago. I experienced the same problem with a HD 7950.
I just want to say : Yes it works finally BUT where did you find this Bios ???
I use the global website and this version is simply missing !!!*
The first thing I did while seeing that I didn't have no video signal and no boot is to upgrade the bios but I only find the .H5 or the bios for Ivy.
Anyway I have a mixed feeling, quiet happy and yes ... thank you for your help now it seems working fine.
But on the other hand ...what a pity from MSI to have a so bad listing of their bios.
Once again thanks

Bios freezes on Hp IPISB-CH2 with new graphic card installed

I own HP Pavilion Elite HPE H8 1010cs. Motherboard is HP IPISB-CH2. I bought new graphic card GAINWARD Nvidia GeForce GTX 970 4GB together with 600W PSU Corsair CX600M. First I tried my new PSU with my old GPU nvidia 550Ti. It worked perfectly. But when I replaced old card with new GTX 970, bios freezes on the first power on window. Escape does not work. Should I return new graphic card, or is there still some hope in this?
This question was solved.
View Solution.

Hello @Tomas83,
I understand that you are having issues getting your HP Pavilion HPE h8-1010cs Desktop PC towork with your Gainward GeForce® GTX 970 Phantom 4GB Graphics Card. I believe the reason you are experiencing this issue is the the break in the downward compatibility on the PCIe slots was broken at around the Gen 2.1 mark and you are trying to put a Gen 3.0 card in a Gen 1.0 slot. This in essence makes your computer incompatible with the graphics card you have chosen to use. I am providing you an article on the overclock.net website titled The final answer to the controversial PCIe x16 version compatibility., where the author explains what I described and goes into how he made the determination. I would advise you review the article if you have any questions concerning the issue you are facing.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Flash movies makes horrible "flickering" sound with new graphic card!

I just bought a Gigabyte GeForce 460 GTX 1GB and now when I watch Flash movies
the movies makes a really bad "flick" flick" "flick" sound. If i scroll down and away from the actuall movie screen
the bad sound stops and the movie plays normally. But soon as I scroll up to the movie the sounds starts again.
Can't stand the bad sound quality anymore!
I tried latest Firefox & Internet Explorer.
I tried uninstall both flash and drivers then reinstall with the latest updates.
I tried searching the web for solutions.
My PC:
HP Pavilion
Intel Pentium 4 CPU 3.60GHz 360GHz
Memory: 3 GB
System type: 32 bit
Windows 7 Ultimate
My new Graphic card:
Link
Thanks for the help!

Hi, We'll have to continue later. From Adobe:
Due to system maintenance with Adobe.com, the log-in and authentication for the Adobe Forums will be temporarily unavailable for approximately 3 hours on Saturday, Sept. 11, 2010.
Maintenance will begin at 7:00 pm PST and will be complete by 10:00 pm PST. During this time, the Forums will be in Read-only mode.
We apologize for any inconvenience. Thank you.
by Mark Nichoson at Sep 7, 2010 10:02 AM
Expiring the announcement will not delete it but will remove it from the public announcement list. Are you sure you want to expire this announcement?
Are you sure you want to delete this announcement?
For my Time Zone, that is in about 10 minutes. EDT for me. 10PM PST
eidnolb

Qosmio G10 with new graphic card and pcb - Tools CD Update doesn't work

Hi everybody
I hope you can help me. Before a few weeks I received my Toshiba Qosmio G10 back from the support, because the notebook didn't work anymore. So I get it back with a new Grafic card and a new PCB. With my Notebook I get a CD which is called update Tool CD-Rom and an instruction sheet, where it says that you have to boot with this update Tool CD-Rom after you had installed the Windows with the reovery CD.
So I made it, but when I know put the update Tool CD-Rom in and I boot with it, the computer installs something but after a short while there comes a message that it is a different model and that I have to put a button to shut down the Notebook. So i made it but the Windows doesn't start.
Why is that so? I had everything done which was said on the instruction sheet.
Please help me

Hello
It will be interesting to find out more about this update Tool CD-Rom. Is there Toshiba label? Can you please write what is described there?

Screen resolution with new graphics card

Mac G4 400 AGP (Sawtooth) OS9.2.2 + Tiger
Hi, I have just updated my old G4 with new HD and new Nvidia GeForce 2MX graphics card. Under OSX everything seems fine but under OS9 the screen (22 Lacie Electron) will only display at 640 x 480 with no other choice of resolutions. I cannot find any drivers other than the Driver Update 3.0v1.1 which gives a message that it 'cannot be run on this computer'.
The original ATI Rage had extensions but I cannot find anything for the Nvidea card - do I nee to reinstall the OS to have them load?
Is this lack of resolution normal or can I change it? I only boot onto OS9 to access some older SCSI devices but the screen re is horrible and makes it hard to use.
Any help or advice welcome. Thanks.
Message was edited by: AntF

Hi, AntF -
The OS 9.2.2 download updater includes NVIDIA drivers (v. 2.4), but they probably would not have been installed if the NVIDIA card was not in the machine at the time the updater was run.
You can probably get them installed them by re-running the OS 9.2.2 updater, now that the card is present.
Or, you can extract them manually from the Installation Tome contained in that download update. You can use the utility TomeViewer to extract (expand) any files you want from an Installation Tome on an OS Install CD or download disk image, without running the installer. There are several NVIDIA extensions; since the default view in TomeViewer is alphabetical, you should be able to grab all of them as a group. Extract (expand) them to the desktop, then (while booted to OS 9) drop them into the closed System Folder - Finder will place them for you.
How to use TomeViewer
I would do the second, since it is safer (there's no risk of the installer accidentally replacing something which should not be replaced).
In case you do not have the OS 9.2.2 updater handy -
Article #75186 - Mac OS 9.2.2 - Download and Info
After getting the NVIDIA extensions installed, restart. Then use Extensions Manager to turn off (uncheck) the ATI extensions. Restart again.

New iPhone with new SIM card - Retrieving data

My iPhone was stolen, so I had to buy a new one, so it's also a new SIM card. When I connected to iTunes, I thought it would ask me if I wanted to restore with my previous backed up data which would have also included all my contacts, notes, pictures, etc. It didn't. Is there any way to retrieve the backed up data from my old phone and sync it to my new phone?

Not sure why it didn't ask you to restore from a backup.
Plug in and open iTunes. Click on the iPhone under DEVICES. Click Restore. Let it restore to factory settings, and then wait for iTunes to prompt if you want to "Set Up as New iPhone" or "Restore from Backup."

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

Is iTunes needed with new SIM card?

Is it necessary to sync with iTunes before a new SIM card works in an iPad? I'm just thinking about what to do if I got a SIM card while abroad for roaming and obviously wouldn't have a computer to sync with. Thanks.

bigsy66 wrote:
Thanks for the welcome and reply. I suppose another question along the same lines is if I swap over SIM cards I have already registered and used with different providers, does that also require a sync with iTunes?
For example, I live in Belfast and am in Dublin quite regularly. Although the iPad is not yet officially available in Ireland (Republic of), it is here in the North and I will be trying to get a something that will let me roam cheaply and easily in both places.
I just read a question and answer from Apple and Mossberg regarding your question. Apparently, SOMETIMES, you have to connect to iTunes if you switch SIM cards. They gave no clarity as to what may or may not require you connect to iTunes.
I think, from what I've read, you have to connect the first time, but you may not have to do so in subsequent switches.

Issue with new video card

I purchased a new video card a few months ago to upgrade my somewhat-aged system. when i put it in the slot and started it would load for a second, but then restart in an infinite cycle.figuring it was a power supply issue i purchased a 650W PSU and plugged it in however this did not fix the problem.am i doing something wrong or does my motherboard not support such a new video card?
CPU
   Intel Pentium D 925
   Presler 65nm Technology
RAM
   2.0GB Single-Channel DDR2 @ 266MHz (4-4-4-12)
Motherboard
   MSI MS-7236 (CPU 1)
Graphics
   Generic Non-PnP Monitor @ 1280x1024
   DELL M990 @ 1600x1200
   512MB Radeon X1300/X1550 Series (Sapphire/PCPartner)
   Radeon X1300/X1550 Series Secondary (Sapphire/PCPartner)
   CrossFire Disabled
Hard Drives
   156GB Western Digital WDC WD1600KS-00MJB0 ATA Device (SATA)
The video card is a diamond Multimedia hd 5500 Link:http://www.diamondmm.com/5550PE31G.php

I am also suffering from the same problem. I have purchased a new video card and when installed the system is continually powering up then off. I have also replaced the power supply with a new 600W unit but still the same. I have checked that I have the latest driver and bios. Any help would be great.
M/B MSI 945PL Neo
Ram 2GB DDR2-533
CPU Intel (R) Core (TM) 2 4400 @ 2.00GHz
Old Graphics card Nvidia GeForce 6600GT (which works fine)
New Graphics card Radeon HD 5670
Ops system Win7 32Bit

HP Pavilion p6, hangs on post with new grafik card Nvidia GTX750Ti

Similar Messages

Maybe you are looking for