HP Pavilion p6700z windows 7 64bits

problem Blue srceen code # 1033 (c:\windows\mindump\012113-31761-01.bmp) shutdown need help to fix this problem

First, there should be more to that error message and second the opinion of others think it is a graphics driver problem or memory error.  Try removing each memory module, one at a time, and then reset it.  Run the diagnostic routine indicated on the HP Invent splash screen and then report back.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

  • Hp recovery manager pavilion dv7 windows 7 64bit not installed correctly

    I'm trying to reinstall Recovery Manager after a hard disk replacement. I have a HP Pavilion dv7 4060si running Windows 7 Home Premium 64 bit. I've downloaded sp45602 and installed it. It did not install properly. When I went to the SwSetup/sp45602 folder and clicked RecoveryMgr.exe I got a message that a DZIP32.dll file was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Then I got a message that HardDisk.dll was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Then I got a message that PRRC.dll was missing. I downloaded it and dragged it into the SwSetup/sp45602 folder. Now I get a message in Turkish that translated by Google reads: Recovery Manager driver failed to start. To apply you will need to reinstall.
    I've deleted the SwSetup/sp45602 folder, downloaded the sp45602.exe again and gone through the same process to get the same result. What is missing from my software?

    Did you resolve this?
    I'm getting the same issues!

  • Missing adapters for Pavilion dm3 - windows 7 (64bit)

    I tried to reload windows, and when I did, I tried to set up my internet again, but there is a missing network adapter. In device manager, there are yellow triangles next to my Ethernet controller, Network controller, and an Unknown device. How do I revive my internet?

    Hi: You need these drivers... Ethernet controller: This package provides the Realtek LAN Driver that enables the Realtek NIC Chip in supported notebook models that are running a supported operating system. File name: sp49686.exe Network controller: This package contains the Broadcom Wireless LAN Drivers that are required to enable the integrated Broadcom Wireless LAN Adapter in supported notebook models that are running a supported operating system. File name: sp49541.exe Unknown device is probably this... This package provides the HP ProtectSmart Hard Drive Protection Software (HP 3D Driveguard) for supported notebook models that are running a supported operating system. The HP ProtectSmart Hard Drive Protection Software (HP 3D Driveguard) protects the hard drive by "parking the heads" if the notebook is accidentally dropped, or is abruptly impacted by another object. File name: sp61037.exe  

  • HP Pavilion G7-2310sw Windows 7 64bit drivers

    I decided to downgrade my Windows 8.1 to Windows 7 64bit on my G7. What drivers should i use in order for it to work?
    Will Win8 drivers work just fine or will I need some replacement for them?

    Hi:
    Use the W7 x64 drivers and software from the g6t-2000 except the BIOS and firmware files.
    http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-pavilion-g6-2000-notebook-pc-series/5226244/m...
    Your model uses the AMD graphics driver for the AMD/Intel switchable graphics your notebook has.

  • Laptop no sound HP Pavilion g6t-1d00 CTO Notebook PC Windows 7 64bit

    laptop no sound HP Pavilion g6t-1d00 CTO Notebook PC Windows 7 64bit everything enabled. I don't want to try to install wrong code from forum searches.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp5503​6.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion g6-2293sx: Windows 8 64bit CDs

    Hi,
    I purchased HP Pavilion g6-2293sx in May2013. It was shipped with Windows 8 64Bit. After a upgrade, I was unable to see the Battery status in status-bar.
    This was really frustrating, as we live in are where frequent Power break-downs occur - almost 4-6 hours daily. So one need to aware of the battery status to prevent abrupt shutdown of notebook.
    Anyways, I downgraded to Windows 7 and during this process I formatted the HardDisk so there is now, No Recovery Partition.
    How I can get back to my Original Windows 8 (64Bit)? From where I can download Windows OS genuine for my Product?
    This question was solved.
    View Solution.

    Sorry,but HP doesn't provide downloads of the HP Recovery partition or HP Recovery image due to licensing restrictions.  Please use the HP Recovery Media, you created when you first setup your computer, to return the computer to a factory like state. If you didn't create your HP Recovery Media, please contact official HP Customer Support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer. Software may not be covered by the warranty and there may be a charge for the HP Recovery Media.
    Alternatively, you can try this Windows 8 OEM download; http://www.google.com/url?sa=t&rct=j&q=en_windows_8_x64_dvd_915440.iso&source=web&cd=1&cad=rja&sqi=2...
    This is an unofficial "official licensed copy of Windows 8 OEM." Download this file (you may have to try several time or repeatedly to successfully download this file) and burn the ISO image to a DVD. Set the BIOS to use UEFI, enable "Secure Boot" and disable "Legacy Support... if these options are present. Boot from this disk and install Windows 8. It should register as an official copy and use the key embedded in the BIOS. Please note that no HP customizations nor HP value-added will be installed using this method.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Unable to install printer Deskjet 6122 on windows 7 (64bit)

    I bought a new HP Pavilion Model HPE h8-1237c running Windows 7 Professional (64bit). I’m not having any luck at trying to install my old HP Deskjet 6122 printer. Drivers on disk and newer downloaded ones are not compatible with the 64 bit OS. HP suggests installing drivers for Deskjet 990c as alternative. That didn't work either. This new computer only has USB ports and not the old parallel one like my old Pentium 4 Windows XP computer. The printer does have a USB hookup, but windows doesn't install the printer as plug and play since there are no drivers available. I've tried installing it running Windows Virtual PC in XP Mode. The printer install software runs fine in the virtual mode until it gets to the "print test page." At that point the install fails to find any printer at which time it completely reverses the install.  Pffft ! !
    Help please!      I've been going crazy for two days to solve this problem. I haven't even begun to attempt installing my trusty old HP Scanjet 5530 flatbed scanner. I suspect it will be a similar nightmare as is this current printer dilemma.
    Am I destine to have to buy new hardware that’s compatible with windows 7 (64bit)?
    This question was solved.
    View Solution.

    The Deskjet 6122 driver should work fine on Windows 7 using the DEskjet 990c driver, but many folks (myself included) have been having problems getting the Deskjet 990 driver to download from Windows Update.
    You have probably already done the steps here, but if not start with that. If the HP Deskjet 990 does not show up after clicking on Windows Update as shown in step 8 and you get a message that "Windows Update was unable to find a list of devices, try again later" then see the solution here.  If the problem still exists then you can download the driver from the Microsoft Update Catalog site, but this is not very easy to use.  If you need to use the catalog site post back here and I will write up some directions.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Help with Drivers for HP dv8315nr for Windows Vista 64bit

    Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't  work either.
    My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
    I appreciate the attention for this manner. Thank you
    Jorge

    I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
    My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
    These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
    thank dr_lynch

  • I need a driver for my Deskjet 1280 on Windows 7 64Bit

    I am still having a problem finding a driver for my HP Deskjet 1280 Printer Im using Windows 7 64Bit operating system. Can anyone assist please.
    I need it for my new HP Pavilion P6-2021UK computer.
    Rod
    This question was solved.
    View Solution.

    Install the alternate Deskjet 1220 driver available through Windows Update. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Installing Firefox with windows 7 64bit mode just does not work.

    I have windows 7 64bit mode. I cannot install firefox, it crashes all the time when I open it. I know the problem is because my windows 7 is in 64bit mode. Can you (firefox support) or someone on this forum provide the simple and easy steps of getting it to work. Also can you (firefox) hurry up and release a 64bit version. I'm using google chrome and crazy browser as they seem to have no problems at all. I really want to use firefox but it just won't set up for me because I'm running win7 64bit mode. If I was running win7 32bit mode I wouldn't be having any issues. Has anyone out there got a simple step by step solution for this? It it mind boggling that with todays technology no one has a simple fix for this issue. Help!!!!!
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

    I have been running Win 7 64 bit on an HP Pavilion lap for several months. The whole browser thing has been a nightmare. My work involves heavy duty internet research. Firefox crashes every few minutes. There is no specific event I can find that kicks this off, but running the latest Flash Players and Adobe Reader makes it a lot worse. In fact, I had to set up the adobe reader to not run within the Firefox window. I had to back off to an old version of adobe Reader and Flash Player to accomplish this. I love Firefox. I was disappointed to have to uninstall it as it was impossible to run searches with it.
    So then it proved to be that IE either version 8 or 9 was even worse. I could not keep it up long enough to run a search.
    So I installed Chrome which has some nice features, but it also crashes, albeit more gracefully so I do not lose my place and it makes a quick recovery but there are many online applications where Chrome just does not work.
    My son also has Win7 64 bit and says he is also having the same problems.
    I want my Firefox back! Please fix it.

  • Iphone 3G on windows 7 (64bits) shows as unknown device

    HP Pavilion tx2500 Notebook PC
    ADM Turion X-2 Dual core
    Windows 7 - 64Bits
    I downloaded the latest version of Itunes and haven’t been able to use since
    Every time I connect Iphone to computer, PC recognizes (it shows on Portable devices)
    but somewhat shows also in another devices (unknown device) and Itunes doesn't recognize or even shows anything.
    I uninstalled and reinstalled Itunes and all apple software (Bonjour, QuickTime etc) about 15 times every way I could imagine.
    I extracted files (usbaapl64). I tried to update drivers with no success.
    I uninstalled Anti viruses, scanned HD, updated some video/sound drivers
    It works on my husband’s computer (another HP)under windows Vista 32bits but it’s not working on mine for the life of me.
    I can’t figure it out what its causing the conflict and would appreciate any suggestion
    I do not really want to try to jump using the restore since last time I did it I had a hard time to download/update my contacts and settings and ended up having to download MobileMe
    Pls help

    todays update
    It got worse before got better
    I uninstalled and reinstalled Itunes a couple more times. I even tried to install a 32bit version since task manager shows Itunes 32*exe.
    I finally gave in and restored Iphone to factory settings and then my iphone could only call 911 (emergency calls)
    I try to connect again to restore it but it didn't work. I tried the DFU and got a error msg "error-message-0xe8000001"
    I researched the error msg and found something about USB2.0. I went to HP site and downloaded an update for some drivers and voila
    right now iphone is being synchronized
    hopefully I won't have any problems with my contacts like I had last time
    this happened to me

  • Ts-L633a DVD drive not compatible with Windows 7 64bit upgrade

    Ts-L633a DVD drive on my Pavilion Dv7 1232nr is not compatible with Windows 7 64bit upgrade but will work fine if I downgrade back to Vista 64bit so what DVD drive is there other then the TS-L633a drive that I already have that is compatible with the Windows 7 64 upgrade so that I can buy and install on my laptop.

    Here's one out of nowhere:  do you have CD/DVD software that includes Sonic DLA or something like it?  I've seen that take over drives and prevent normal operation.
    If you right click on the drive and hit properties, are there any suspicious looking tabs?
    Total WAG, and about 1% likely, but there you go.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

    I used to have Windows XP 32bit and everything worked fine.
    I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
    iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
    Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
    When I try to back up, the loading bar with either:
    Have a loading bar with diagonal lines forever or,
    it will start moving and freeze.
    I've tried leaving the process for hours, but to no avail.
    While the back up is being attempted, iTunes still retains full functionality.
    I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
    I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
    Installed iTunes for the first time.
    Went into preferences and disabled the automatic backup option.
    Plugged in the iPhone, right-click "back up".
    The back up took less than 5 minutes.
    I don't understand why my main PC can't back up my iPhone.
    Can anyone help please?
    I've tried researching the same problems and I've ended up doing the following:
    Reinstalling iTunes,
    Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
    Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
    Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
    I would appreciate any suggestions!
    Kind regards,
    Will

    Hi there,
    I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
    Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
    I tried all of these without success:
    - deleted backups via iTunes / Preferences
    - deleted backups from sync folder
    - created a new admin user and tried to sync
    - reinstalled iTunes
    - ran all Windows updates, restarted, reinstalled iTunes
    - ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
    Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
    Any hints welcome,
    Cheers,
    Miguel-KA

  • Install JMF on Windows 7 64bit

    Dear all,
    After a lot of struggling (and a really mean a lot), I finally got jmf to work on Windows 7 64bit. I figured that I can better not let this information go to waste, so that's why I'm posting it here. I didn't really test the full capabilities of jmf on my platform yet, in fact I only tested those features that I needed for my application. As such I am able to successfully capture and record video clips from my build in webcam of my laptop.
    First let me describe my platform:
    Laptop: Samsung R590 (JS01)
    Processor: I5 450M (64bit)
    OS: Windows 7 64bit
    Webcam: build in
    Secondly I want to apologize in advance if the method below doesn't work for you. The reason for that can be that I had to try so many different things before I finally got it to work, so I'm not really sure which steps are necessary and which ones are not. So I tried to make a guide that only includes the necessary steps, but in reality I tried so much more, so if this tutorial doesn't work for you, please give me feedback, and we'll try to figure it out. :)
    Step one: installation of java JRE/JDK
    JMF will never work on a 64bit JRE/JDK, plain and simple because JMF is too old and doesn't support a 64bit JRE/JDK. Thus your first step has to be to install a 32 bit JRE/JDK on your system. (I uninstalled my 64 bit JRE/JDK first, but I don't now whether or not this is necessary)
    Step two: download JMF with windows performance pack
    Go to the jmf site and download the most recent jmf version, with windows performance pack. (This is - and will probably be forever - version 2.1.1e)
    The link to the website is currently: [https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=7372-jmf-2.1.1e-oth-JPR@CDS-CDS_Developer]
    Step three: install JMF
    Install the file you just downloaded in the normal way you would install any other program. But chose as installation path: "C:\JMF2.1.1e"
    I think this is necessary because of the strict security policy in Windows 7, if you don't do this, I guess jmf won't be able to store capture device settings to your local hard drive. (But again, I'm not completely sure here, please verify this if possible)
    After the installation, you don't have to do anything special to get jmf to work, so you don't manually have to set the JMFDIR, PATH and CLASSPATH (as is explained at the sun website), just skip those steps.
    After the installation, reboot your pc.
    Remark: I recommend you to install jmf as an administrator (but I don't now whether or not this is necessary). To do this, right click the installation file and select: "run as administrator'.
    *Step four: register your capture devices*
    First make sure that all your devices are working properly, I recommend you to use a program like Skype or something just to check whether your microphone is working or not.
    Secondly, open jmfstudio, select 'file > preferences > capture devices', and press the button 'detect capture devices'. Normally you will have to wait for a couple of minutes now (because the determination of all the available video formats takes quite a while). Afterwards jmf should have found all of your devices, that usually looks something like this:
    DirectSoundCapture
    JavaSound audio capture
    vfw:Microsoft WDM Image Capture (Win32):0
    But this can vary according to your configuration off course. :)
    *Step four: test your capture devices*
    In jmfstudio, select 'file > capture' and select the video and audio combo and see if your webcam settings work. You should now be able to view and hear yourself.
    *Step five: that's it, enjoy your jmf*
    *Remarks:*
    My development platform is currently netbeans 6.9.1 and I am able to write code, build it and run it with netbeans. I can also just run normal *.jar files
    *Troubleshoot:*
    If you get a dialog screen when starting your video capture device that looks like this: [http://www.alexandria.nu/ai/machine_vision/dual_cameras/SelectDevice.gif]
    (With off course another name for the capture device), then that means that your capturing device is currently occupied by another program and you can't currently use it.
    To solve this, make sure that no other application is using the webcam. For me even this was insufficient, but I managed to solve this by installing the latest drivers for my webcam from the manufacturing site of my laptop.
    I sincerely hope this tutorial can be of any use for someone, feel free to give me comments/suggestions. And please post here if this works for you or not.
    Greetings, Molly

    Hi
    sure I follow each of your steps, I uninstall all java verisones and installed a new java version 32-bit, I installed JMF in "C: \ JMF2.1.1e".
    when all installing finished, works fine JMF only once, I do the tests, recognizes the device; shows the video, but when I close and open again JStudio don't works throws error, and therefore my apliación not working, always returns null the device

  • Sequencing Adobe Photoshop CS5 on Windows 7 64bit

    Hello
    am sequencing the Adobe Photoshop CS5 on Windows 7 64bit build, The installation had ended with Exit Code: 6 - Silent workflow completed with errors.
    The error summary log is as shown below
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 3 warning(s)
    WARNING: OS requirements not met for {667C8B6C-3EAF-4646-A8EC-D85CCC4D3D84}
    WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
    WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
    ERROR: 548 Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}\_497_ecaa88f7fa0b f610a5a26cf545dcd3aa" to "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 3 The system cannot find the path specified.
    ERROR: 548 Command ARKMoveFileCommand failed.
    ERROR: 548 Unable to delete file copy at "C:\Windows\System32\Macromed\Flash\FlashPlayerTrust\AdobeXMPFileInfoCS5.cfg" Error 2 The system cannot find the file specified.
    ERROR: 548 Error rolling back command ARKMoveFileCommand
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe XMP Panels CS5: Install failed
    but when am installing it normally on the same build it installs successfully without any errors.
    does any one tried to sequence photoshop CS5 application?
    Please suggest your valuable inputs on this?
    Regards,
    Srikanth

    Looks like the first two warnings are security level warnings meaning that your silent install will not grant the correct security level for what ever reason. I suspect it needs admin level maybe?
    Here is a link. Read #8 as it has to do with silent installs. The log will give you more hints on what you did wrong.
    http://kb2.adobe.com/cps/829/cpsid_82942.html

Maybe you are looking for