HP Pavilion s7720.uk memory upgrade

My parents own a HP Pavilion s7720.uk Desktop PC (opens in new) 
Performance is suffering recently as it has become become loaded with software and gbs worth of photos and itunes music. they havent upgraded yet and I think upgrading the memory speed to freshen it up.
I believe that it currently features 1gb of 444mhz pc-4200 Hynix Memory. (Serial - Rx8-PC2-4200U-444-12-HYMP564U64CP8-C4-AB-C--0650--C)
The hp product page for the model states that PC2-4200 MB/sec is supported but I hope it will allow faster?
Ideally, I would like to install 2gb of superior crucial memory, but I am unsure of whether the motherboard will support the faster speed dimms. I already have understood 2gb is the maximum capacity but I hope somebody can tell me what the maximum memory speed it will accept, if that is, it is even an issue? I would hope maybe 667mhz 800mhz of the type PC2-5300 or PC2-6400?
I welcome any suggestions for alternative memory or different upgrades if this is not a particularly great idea. Note they already have an external hd 
Cheers
Chris

Hi,
You can buy RAM from the following vendor (guaranty) or use the information to buy elsewhere:
   http://www.crucial.com/upgrade/HP+-+Compaq-memory/​Pavilion+DV6000+Series/Pavilion+dv6500+Series-upgr​...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Pavilion dv5-1000us memory upgrade

    I have an HP Pavilion dv5-1000us Windows 7 (product # FE850UA#ABA)
     notebook installed with 4GB memory (2
    X 2GB memory modules). I recently
    upgraded to 8GB (2 X 4GB) but after
    installation the notebook failed to
    start up (failed to read disk).
    Each of the 4GB memory modules works
    fine when installed individually in
    either of the memory slots. I can
    operate the notebook with 6GB (1 X 4GB +
    1 X 2GB modules).
    Would you please advise me.

    The memory you are using are from same manufacturer?
    Please take a look at the link below for the memory installation topic
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00820047&tmp_task=solveCategory&cc=us&dlc=en&lc​...
    If possible, make sure all memory modules in your configuration are from the
    same manufacturer and have the same part number.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • HP Pavilion dv7 2215sa memory upgrade to 8gb becomes unstable

    I have a HP DV7 2215sa laptop running Windows 7 Home Premium 64bit ed and it has 4GB of Ram.
    I wanted to upgrade the mem to 8GB to bought two 4GB mem from Crucial and experienced the following problems:
    1. Turned on the laptop after the upgrade and got 'Windows is loading file' message. After that, windows didn't load and saw the HP logo again (as you would do when you start the machine up). Then was presented with two options..... start windows normally or load windows repair (something like that, I can't remeber the exact message). With Either option selected, the machine just goes into the same bootup loop and you then presented with the same two options.
    >>>>> Did a system check on the machine, i.e. checked memory and hardisk and they passed successfully. (System check being the option you go to when see the HP logo and press F2 i think....??)
    2. Machine boots up after system check and......windows starts to load up, but crashes when I get to login prompt.
    3. Restart machine again, Windows doesn't load and I get those previous two options again.....selsct load windows normally and....windows loads up! I manage to log in! I casn browse the web, load applications...and its quite fast but notice something strange. The screen flashes (just the once) and my wireless connection dies for about 5 minutes, i.e. get crossed symbol in the wirless icon as if to say its been disbaled when its not. The blue light is still on for wirless though on the laptop.
    4. Wireless recovers. Run Go on to firefox, try to update it.....the update fails. Load itunes, it requires an update.....when it tries to download the update from apple, it gets a download rate that reminiscent of dialup...Kill, the download and acquire the latest file from Apple. Windows then tells me that the download in unverified and that it cant be trusted. **bleep**? Try this a number of times and then eventually it manages to accept the file somehow. But the drama doesn't end there, th install cycles about 5/6 times and then it eventually installs the application. (It was the 64bit version, 32bit couldn't be installed as advised by apple).
    5. Rebooted the machine about three times and managed to log in all three times but still seemed unstable (i.e. firefox still didn't update).
    6. Next day, started the machine.....BLUE SCREEN OF DEATH.....something about memory management. didn't get the error message recorded but knew it was to do with memory.
    I've got my laptop working again by re-installing my old memory.
    The modules that I bought were....... DDR310600 1.5V 4GB (x2)
    My current modules are Samsung PC3-10600 2GB
    I didn't try installing one module at a time to see which one was faulty because I was annoyed and just returned the memory back.
    Has anyone had a similar experience with the same if not similar laptop? And if so, how did you manage to upgrade your laptop to 8GB?
    Thanks,
    Dav

    I had the same issue with my dv7 2278 and was not able to fix my problem.
    i tried 2 differenst memory manufactured, and each of them did not work.
    My opinion HP portable is a piece of scr......

  • HP Pavilion p7-1414 memory upgrade issues

    I just purchased a HP Pavilion p7-1414 desktop. This system has an AMD A8 processor and supports up to 32gb ram. I recently purchased a new 8GB stick of Kingston KHX16C10B1R/8 1600MHZ DDR3 NON-ECC HYPER X BLUE. This memory will only clock 1333MHZ no matter what slot I install it in. This machine has 4-memory expansion slots. The machine runs fine but the memory will not clock up to advertised speed.
    Any input is appreciated. The memory in brand new. I also have 2 new 4MB sticks of Kingston ddr3 1600MHZ memory and they both clock fine @ 1600MHZ.
    Thanks! 

    It seems likely that the HPSA isn't reading the information correctly.
    If the BIOS shows the correct reading and passes the memory test, I would say that it's operating normally.

  • Memory Upgrade on DV7T-3000 (NQ339AV)

    Hello,
    I have a Pavilion DV7T-3000 with i7-820QM Processor. I am planning on a memory upgrade. Has any one tried upgrading it to 16GB RAM ? (2 x 8GB). As per specs it can only go up to 2x4 GB.
    Thank you for for any feed back.

    I believe you should try to PM a level 8 or higher expert here and see if they will access someone from HP.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • HP Pavilion p6340f PC - Memory Expansion for Adobe Photoshop

    Can the HP Pavilion p6340f Desktop PC Windows 7 64 bit system be expanded to 16 or more GB Ram ??
    The problem is ...
    Often get PhotoShop stop working Error when using Adobe PhotoShop CS5 with NIK Plug ins on larger files.
    Present Memory is 4 x 2 GB = 8 GB DDR3PC3 10600MB/sec

    Hi,
    From its specs:
    Memory upgrade information:
    Four DDR3 DIMM (240-pin) sockets
    Supports 2 GB DDR3 DIMMs
    Supports dual channel memory architecture
    Supported speeds:
    PC3-8500 @ 1066 MHz
    PC3-6400 @ 800 MHz
    Non-ECC memory only, unbuffered
    Supports up to 8 GB on 64-bit PCs
    Supports up to 4 GB* on 32-bit PCs
    Max 8Gb and already has 8Gb
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Memory upgrade on iMac G3 700, help with system crashes

    I tried to do a memory upgrade on my iMac, so I bought two kingston 256 MB PC133 modules, but none will work, the system starts, but hangs in about two minutes after loading the desktop. I went back to use the older memory module wich is an spectek, but I need the upgrade, any ideas?
    Thanks!
    FedericoMG.
    Ps: Sorry about my english... I'm from Argentina... :-P

    Hi Federicomg
    The iMac 700 G3 should have been supplied with 1 stick of 256mb ram. However which is the correct type i am not sure as the Apple specifications for this model state PC100 whereas my iMac G3 700 graphite was supplied with 256 MB PC133-333 SDRAM
    http://support.apple.com/specs/imac/iMacSummer2001.html
    Apple profiler from my iMac this is the original supplied RAM from Apple:-
    DIMM0/J13: Size: 256 MB
    Type: SDRAM
    Speed: PC133-333
    1) I would re-instal the original ram and open system profiler to see what type the ram is.
    2) Keeping the original stick in place add another stick of the new ram and look again in profiler to see if its recognised and again try the second stick to see if there's a problem with one of the sticks.
    I am currently running my iMac with a small upgrade of RAM and the additional RAM is 128MB of PC100 and i have noticed the performance improvement since adding the PC100 so it's working and i have suffered no ill effects doing this..
    paul..

  • MS-6195 memory upgrade

    Hi,
    My system is based on Ms-6195 K7 pro and Athlon 700 mhz. 192 Mb Ram (128Mb module + 64Mb module)
    Problem:
    when I try to upgrade memory with a sdram 256Mb PC100 module, the memory test can't finish and my system don't boot.
    Please can you tell me how configure coreectly the BIOS or tell how to do.

    MS-6195 memory upgrade.
     I have also tried using new PC100 256Mb memory and am getting nowhere.
    The ones that I have bought are single sided, [8 chips on only one side]
    and do not work with my motherboard, however, if I put them into another,
    older PC, it shows up as 128Mb.
    So I assume that the DIMM is working OK, and that the 'old' PC has a memory size limitation??
    I have tried the same things as wbs and Grommit and got the same results.
    So I assume that the answer is in getting older DIMMs, double sided with 8 chips on either side.
    Does this seem to be about right???

  • Memory upgrade fail - Kernel panic after put old memories back

    I People, this is my first post here and unfortunately is to report a problem, not to help friends.
    I did an memory upgrade last weekend. After this, he will not boot normally, only in safe mode.
    I discovered that they sent me 1333Mhz memories, and my mac (mid 2009) supports only 1066Mhz.
    I put the old memories again, however I believe that the system did not recognize.
    As you can see below, the system recognizes two modules:
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    It is not true, I' using now 2 x 2GB, DDR3, 1067 Mhz (stock)
    I tried to reinstall the system, but when I try, I got crash again.
    how can I solve this issue?
    Interval Since Last Panic Report:  5298 sec
    Panics Since Last Report:          6
    Anonymous UUID:                    EAEB74C4-4B23-BCC2-1A48-B6FEB255C9FF
    Mon Apr  1 16:37:33 2013
    panic(cpu 1 caller 0xffffff800e0876ab): "Spinlock acquisition timed out: lock=0xffffff8011bff270, lock owner thread=0x10d9fb0aa, current_thread: 0xffffff801f873000, lock owner active on CPU 0xffffffff, current owner: 0x10d9fb0aa"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/locks_i386.c:363
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80f54fbd10 : 0xffffff800e01d5f6
    0xffffff80f54fbd80 : 0xffffff800e0876ab
    0xffffff80f54fbdb0 : 0xffffff800e06256b
    0xffffff80f54fbf40 : 0xffffff800e0b7f69
    0xffffff80f54fbfb0 : 0xffffff800e0ce3d1
    BSD process name corresponding to current thread: diskarbitrationd
    Boot args: config="\OS X Install Data\com.apple.Boot" root-dmg=file:///OS%20X%20Install%20Data/BaseSystem.dmg
    Mac OS version:
    12A269
    Kernel version:
    Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
    Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
    Kernel slide:     0x000000000de00000
    Kernel text base: 0xffffff800e000000
    System model name: MacBookPro7,1 (Mac-F222BEC8)
    System uptime in nanoseconds: 8887270925
    last loaded kext at 1689458563: com.apple.driver.AppleUSBTCButtons     235.4 (addr 0xffffff7f8f6c7000, size 20480)
    loaded kexts:
    com.apple.driver.AppleUSBTCButtons     235.4
    com.apple.driver.AppleIRController     320.15
    com.apple.driver.AppleUSBTCKeyEventDriver     235.4
    com.apple.driver.AppleUSBTCKeyboard     235.4
    com.apple.driver.DiskImages.ReadWriteDiskImage     344
    com.apple.driver.DiskImages.SparseDiskImage     344
    com.apple.driver.DiskImages.UDIFDiskImage     344
    com.apple.driver.DiskImages.FileBackingStore     344
    com.apple.driver.DiskImages.HTTPBackingStore     344
    com.apple.driver.DiskImages.RAMBackingStore     344
    com.apple.driver.AppleFileSystemDriver     3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib     1.0.0d1
    com.apple.BootCache     34
    com.apple.driver.AppleUSBCardReader     3.1.0
    com.apple.iokit.SCSITaskUserClient     3.5.1
    com.apple.driver.XsanFilter     404
    com.apple.iokit.IOAHCIBlockStorage     2.2.0
    com.apple.driver.AppleSmartBatteryManager     161.0.0
    com.apple.driver.AppleUSBHub     5.1.6
    com.apple.iokit.AppleBCM5701Ethernet     3.2.5b3
    com.apple.driver.AirPort.Brcm4331     600.15.20
    com.apple.driver.AppleFWOHCI     4.9.5
    com.apple.driver.AppleAHCIPort     2.4.0
    com.apple.driver.AppleUSBEHCI     5.1.5
    com.apple.driver.AppleUSBOHCI     5.1.5
    com.apple.driver.AppleEFINVRAM     1.6.1
    com.apple.driver.AppleRTC     1.5
    com.apple.driver.AppleHPET     1.7
    com.apple.driver.AppleACPIButtons     1.6
    com.apple.driver.AppleSMBIOS     1.9
    com.apple.driver.AppleACPIEC     1.6
    com.apple.driver.AppleAPIC     1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient     196.0.0
    com.apple.nke.applicationfirewall     4.0.39
    com.apple.security.quarantine     2
    com.apple.driver.AppleIntelCPUPowerManagement     196.0.0
    com.apple.driver.AppleUSBMultitouch     235.7
    com.apple.iokit.IOUSBHIDDriver     5.0.0
    com.apple.driver.DiskImages.KernelBacked     344
    com.apple.iokit.IOSCSIBlockCommandsDevice     3.5.1
    com.apple.iokit.IOUSBMassStorageClass     3.5.0
    com.apple.driver.AppleUSBMergeNub     5.1.5
    com.apple.driver.AppleUSBComposite     5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice     3.5.1
    com.apple.iokit.IOBDStorageFamily     1.7
    com.apple.iokit.IODVDStorageFamily     1.7.1
    com.apple.iokit.IOCDStorageFamily     1.7.1
    com.apple.iokit.IOAHCISerialATAPI     2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily     3.5.1
    com.apple.iokit.IOUSBUserClient     5.0.0
    com.apple.iokit.IOEthernetAVBController     1.0.2b1
    com.apple.iokit.IO80211Family     500.15
    com.apple.iokit.IONetworkingFamily     3.0
    com.apple.iokit.IOFireWireFamily     4.5.5
    com.apple.driver.AppleMCP89RootPortPM     1.11
    com.apple.iokit.IOAHCIFamily     2.2.0
    com.apple.iokit.IOUSBFamily     5.1.6
    com.apple.driver.NVSMU     2.2.9
    com.apple.driver.AppleEFIRuntime     1.6.1
    com.apple.iokit.IOHIDFamily     1.8.0
    com.apple.iokit.IOSMBusFamily     1.1
    com.apple.security.sandbox     220
    com.apple.kext.AppleMatch     1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages     344
    com.apple.iokit.IOStorageFamily     1.8
    com.apple.driver.AppleKeyStore     28.18
    com.apple.driver.AppleACPIPlatform     1.6
    com.apple.iokit.IOPCIFamily     2.7
    com.apple.iokit.IOACPIFamily     1.4
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.16)
    Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 0 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: ST9500420AS, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

    Hi BGreg,
    I already reset the PRAM as you said.
    I've cleaned the memory modules as indicated by Linc above.
    Today I formatted my harddrive to try a clean install, but system crashs after 5%, 10%.
    There is something making me worried:
    In one of my tries, I opened the system view to check my actual hardware configuration, and to my surprise, the system shows me 8GB installed. Cannot be. I have 2 x 2GB.
    Where my system stores this information? There is a way to reset it? I tried last hour install the snow leopard, that cames with my mac, by DVD, but does not worked too.
    Thank you all so far.
    Giuliano

  • Memory upgrade

    Hi,
    Can I install 2 x Crucial 4GB DDR3 - 1333 SODIMM 1.35V 204 PIN - CT51264BF1339J on a Macbook Pro 13 inch late 2011?
    Currently, I have 4 GB (2 x 2 GB) and I want to upgrade to 8 GB. There is a controversial info regarding this particular memory module, some people say it is not compatible.
    When I look to the specs I find:
    204 PIN form factor = OK
    1,35 V = OK
    DDR3 = OK
    1333 = OK
    SODIMM = OK
    Max 8GB = OK (2 x 4GB)
    Latency= 9 cicles (same that stock modules supplied with the laptop) OK
    The thing is Crucial, sell an identical specs module that costs quite more. They claim it to be compatible with Mac. The also sell this one I mentioned as being not compatible. The funny thing is that specs for both are identical. I only find a difference on the pricing. So I am really confused.
    Do they one to sell me a more expensive one like being specific for Mac or there is a hiden specification that makes the two modules to differ from each other?
    Can somebody confirm this info to me, please?
    Many thanks in advance
    Best Regards

    News on this subject:
    A Crucial support representative replied saying:
    "Mac compatible memory is guaranteed to work in your specific system.  There may be subtle differences in non specific memory that will cause it not to work for you such as chip solution and the configurations of chips..."
    Well, I find it very ambiguous technically speaking. If they sell good quality memory as they claim, I do not see which subtle differences will affect the functionality. The chip configuration is standard and chip solution is about quality. So Crucial should be all right as everyone claims (even if manufactured in China)
    So I went a head and both 2 x CT51264BF1339J for a very reasonable Belgian price and installed it into my system just two minutes ago. I am writing this using the mentioned system.
    I was on Google after 30 seconds of taping the On button. Although it did not changed a lot as this startup timing is more related to the Hybrid 750GB HDD (SSD + Conventional Drive) I upgraded few months ago.
    I upgraded the memory to run Virtual Box and Parallel desktop more easily though it worked quite good with 4GB. I did not upgraded to 16GB because it is not necessary on my usage. Only one virtual machine at once + E-mail + Browser + some PDF opened. Some technical stuff and nothing like Photoshop or similar. Thus the huge money difference would have gone for nothing if I buy the specific Mac modules of 8GB each as "Crucial Memory Upgrade Tool" subjected me.

  • Memory upgrade not working

    I ordered 8GB memory for my imac mid-2011 model.
    I then tried to install and all I'm getting is three beeps telling me there's something wrong with my memory.
    I've tried all configurations but can't get the 2x4gb modules to work.
    I've had to stay with only the original 2x2gb ones it came with.
    Can anyone please help.
    The only difference, besides the size, between the two modules is that on the 4gb ones is says PC3-10600S-9-10-F2 and the 2gb ones say all the same except instead of F2 at the end it's F1.
    Cheers.

    Which would seem to suggest that you may (unusually) have a doubtful memory module.   Less unusually, you would have paid over the top for it.
    Many people on these forums speak well of the following suppliers.
    In North America contact OWC … Upgrade Apple iMac Memory
    In Europe contact Crucial.com  … RAM Memory Upgrade
    Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.  
    There may be benefits buying from your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates.  Check out the basic memory costs and do your sums next time you buy.

  • Memory upgrade on Satellite Pro L40-15d

    Hi
    I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
    But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
    Regards

    Hi
    The notebook doesnt boot after the memory upgrade due to these different issues;
    - memory modules are not compatible together
    - memory modules are not compatible with the notebook
    - memory modules are faulty
    - one of memory slots is faulty
    In most case the memory module replacement helps.
    One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
    Several weeks ago I have updated my memory and the notebook didnt boot.
    I thought its a memory malfunction but after module switching the notebook booted correctly.
    Good luck

  • Memory upgrade on Satellite A50-104

    I NEED TO FIND A 512MB MEMORY UPGRADE FOR MY A50/104 ANYONE NO THE CORRECT ONE TO BUY, I WAS TOLD ON EBAY THAT 512 DDR SODIMM IS THIS RIGHT. ALSO HOW DO I CHECK ON MY LAPTOP FOR THESE DETAILS IF THERE ARE ANY AND ANY OTHER SPEC BATTERY ,HARDDRIVE ETC

    Hi
    You have several ways to find out what memory module is compatible and supported.
    You can use a diagnostic too like Everest, you will check the user manual or the Toshiba website for details or you will contact the service in your country for supported modules.
    I will try to answer the question: The Satellite A50 should support PC2700 DDR-RAM like these parts:
    PC2700 256MB (PA3311U-1M25)
    PC2700 512MB (PA3312U-1M51)
    PC2700 1024MB (PA3313U-1M1G)
    Now its your choice. You can also google for the offers
    By the way: Visit the Toshiba Options & accessories site. There you will find compatible parts

  • Memory upgrade on Satellite Pro A40

    Can anyone please advise where is the best place I can get a memory upgrade for my Satellite Pro A40 laptop.
    I think my machine is a PC2700 DDR. I am looking for either 512mb or 1gb.
    Thanks in advance.
    Christine

    Hi
    On the Satellite Pro A40 you will find 2 memory slots and you can upgrade the memory to max 2GB (2x1024MB)
    It should be possible to use these modules:
    PC2100 512MB (PA3164U-1M51)
    PC2100 1GB (PA3278U-1M1G)
    And
    PC2700 512MB (PA3312U-1M51)
    PC2700 1024MB (PA3313U-1M1G
    I purchase the compatible parts and devices always form the Toshiba service partner in my country because so I'm 100% sure that this parts are compatible.
    So I would recommend you also to buy the modules form the ASP in your country.

  • Memory Upgrade on Satellite Pro A60

    I have upgraded an A60 Pro with a 1GB memory up but the Control Panel /System/ General tab still shows it as having 192MB RAM. This limits me downloading some Security Software from BT Yahoo.
    Can anyone advise on how I can make the machine recognise the new RAM or is the 192 MB RAM noted different memory from the new memory upgrade?

    If you use non-compatible RAM module it is logic that system can not recognize it correctly. I do not know who is the manufacturer of this 1 GB RAM module but if you want to use compatible one pick up some info about PC2700 1024MB (PA3313U-1M1G) or check Kingston web page.

Maybe you are looking for