Hp pavilion slimline s5-1114 video

I need to upgrade my video card to support viewing HD video. Looking for a recommendation. Also, what is involved with installing this card, I am really a novice with this stuff. Do not need any thing high end or real fancy, just something basic to view HD video.

Hi landerson4004
Is that right, motherboard has 3 PCI Express x1 to install WLAN card, Wifi USB adapter is also possible to use.
http://www.amazon.co.uk/gp/product/B006BSPTAQ/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=479289247&pf_rd_s=lpo-t...
http://www.amazon.com/Panda-300Mbps-Wireless-N-Adapter-button/dp/B00JDVRCI0/ref=lp_13983791_1_4?s=pc...
IPISB-CU (Carmel2)
Figure 1: Motherboard top view
Manufacturer: Pegatron
Form factor: uATX - 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset: Intel H61
Memory sockets: 2 x DDR3
Front side bus speeds: 5 GT/s
Processor socket: LGA 1155
Expansion Slots:
1 PCI Express x16
3 PCI Express x1
1 PCI Express Mini Card x1
For more details, see Carmel2 motherboard specifications

Similar Messages

HP Pavilion Slimline S5-1114 - Wireless adapter card

I puchased a HP Pavilion Slimline S5-1114 and it only has wired ethernet capbilties. Is there a USB adapter or PCIe card that can work for this PC?

Hi landerson4004
Is that right, motherboard has 3 PCI Express x1 to install WLAN card, Wifi USB adapter is also possible to use.
http://www.amazon.co.uk/gp/product/B006BSPTAQ/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=479289247&pf_rd_s=lpo-t...
http://www.amazon.com/Panda-300Mbps-Wireless-N-Adapter-button/dp/B00JDVRCI0/ref=lp_13983791_1_4?s=pc...
IPISB-CU (Carmel2)
Figure 1: Motherboard top view
Manufacturer: Pegatron
Form factor: uATX - 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches)
Chipset: Intel H61
Memory sockets: 2 x DDR3
Front side bus speeds: 5 GT/s
Processor socket: LGA 1155
Expansion Slots:
1 PCI Express x16
3 PCI Express x1
1 PCI Express Mini Card x1
For more details, see Carmel2 motherboard specifications

No sound after upgrading video card on Pavilion Slimline?

Note: Solution follows this post.
I submit this due to the fact that I could not find a suitable resolution for this problem in these forums. Hopefully someone else can receive some benefit from it.
I just upgraded my video card in my Pavilion Slimline to an PCI-E ATI 4650. After the upgrade I get no sound whatsoever from the Realtek HD sound (onboard). In checking the property sheet of the soundcard, I can see that the Realtek device is set to use HDMI output. This is fine except for the fact that HDMI is not being used. I am using the Analog plug on the rear of the soundcard.
Windows 7 x86
4G Ram
ASUS TV Tuner
ATI 4650 PCI-E Video

The resolution that worked for me is as follows:
1.) Open device manager and disable any other installed audio devices. (For me this was the ATI HDMI audio device that is installed with the ATI Video Card and also the Audio device used by the ASUS TV Tuner I have)
2.) With only the Realtek Audio device enabled, reboot. Be ready to press F10 to get into your BIOS setup options.
3.) Within your BIOS find the settings for your onboard Audio device. Change that setting from "Auto" to "Enabled". Save your changes and reboot. (This step may or may not be necessary but is included here as a precautionary measure just in case.)
Upon reboot your sound should be working properly. (Mine was)
4.) Now go back into Device Manager/Audio properties and "Enable" the devices you disabled earlier. Check to make sure sound is still working afterwards. If all is still working, reboot and check it again just to be sure.

How to remove power on password on slimline pavilion hp s5-1114

how to remove power on password on slimline pavilion hp s5-1114
This question was solved.
View Solution.

Hi,
See the sub-heading 'Clearing the Password settings' on the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02980014&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I operate multiple monitors on my HP Pavilion Slimline Pavilion s3600t?

Hello HP Forum,
I am looking to operate 2 monitors on my HP Pavilion Slimline Pavilion s3600t that currently has GeForce 7100/NVIDIA nForce 630i. I am not a computer technician and only semi-tech saavy (less than more). I was told I needed a video card; however, I don't know what I need nor how to install it. Can anyone tell me what I type of video card I need to purchase (and why) and then point me to a video or instructions on install?
Further, what would it take for a computer to operate 3 monitors? Would this computer capable of operating 3 monitors? And what would that entail/how does it compare to installing options for 2 monitors?
Thanks for your help guys!
Cheers

Hi JuHo, I see that you would like to know how to connect multiple monitor's to your computer. I do have a document that will assist you with this task. Please click on the link to get to the document. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph03739&lc=en&product=3832297&tmp_...
This document is for Windows Vista and XP. If you are using a different operating system, please let me know and I will research the issue more for you.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Pavilion Slimline s5510f Desktop PC

Hello,my system is HP Pavilion Slimline s5510f Desktop PCcan I upgrade video card so It can work with win 10?Thank you very much

Hi, Please review this post and this Microsoft information and again this information. What are the results?

HP Pavilion Slimline S5: Internal HDD Failure, PC Won't Boot

My HP Pavilion Slimline S5's internal HDD failed and died recently (bought in 2011). My HP warranty was long gone.
The startup screen showed this message:
1720-SMART Hard Drive detects imminent failure
Failing Drive: SATA0
Failing Attributes: # 05
I have several questions regarding this issue:
Is it caused solely by HDD failure? I want to replace it myself, but I'm not really sure if there are any other parts to be replaced. Or will it be better to bring it to computer shop to have it checked thoroughly?
Can I replace it with Seagate Barracuda 3.5" (7200rpm, 1 TB, SATA 3 or 6)? I think current HDD is Hitachi.
Do I still need to transfer Windows OEM after the HDD is replaced?
Thanks in advance.
This question was solved.
View Solution.

While not entirely sure what that error code means but I think it just means that the OS is not installed and the booting sequence has failed. In my posting about the cloning process, nowhere did we discuss being able to boot the PC to the new drive before attempting the clone, so that process is next or just use the Recovery set on the new drive.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I am trying to install a hp officejet 4215 all in one on a HP Pavilion slimline with Vista

I am trying to install a hp officejet 4215 all in one on a HP Pavilion slimline with Vista, I log in under myself and I am an administrator, When I run the cd to install it shows that I need to be logged in as administrator, any help out there ?

I am not sure why the HP software needs to recognize your airport. That's a function of the OS. Can you be more specific about the problem you are having? Do you have some screen shots? Is the Macbook connected to the router?
If the HP printer can't recognized the router, that's a different story. You'll need to plug the Macbook into the printer (by cable) to config it (that's typical). You may need to assigne the printer its own static IP address (which I would advise doing anyway). That way you can always find it and it will make setting up network printers on other computers a bit easier.
DB

CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop

Hi! I am having problems with my HP desktop computer and wonder if someone can help me solve this issue.
My CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop. When I tried to test my CD/DVD drive to ensure it it was working properly , When I clicked to open Hardware Diagnostic Tools and it said "The software program is not found". The CD/DVD drive was working but will not respond or recognize that a disk is in the drive. It states insert disk in drive. Where are my diagnostic tools that are missing?

Hi,
Your Seagate update CD is to update the firmware for Seagate hard drives.
Did you try the tips in the post that I referenced above?
Error 31 indicates that the driver is not installing correctly.
Go to Device Manager, locate the CD/DVD drive, open up the CD/DVD drive, double click, click on the Driver tab, then uninstall the driver. Now reboot your PC and Windows will re-install the driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion Slimline Windows 7 64-bit: "No speakers or headphones are plugged in" error message

I have an HP pavilion slimline, model s5120y, with Windows 7 (64-bit).
I just got my power supply replaced and when I brought it home and plugged everything in, I couldn't get any sound. It told me no audio devices were plugged in, but my monitor with speakers was plugged into the audio jack in the back, the green one (it's an onboard sound card and NOT HDMI). I also tried my headphones and same thing, so I know it's not the monitor.
So then I tried the jack in the front and it worked, although the sound was really low, even with the volume turned all the way up. But, then like an hour later it went off again giving me the same message that no devices are plugged in. I tried the back jack again and then it worked again for a short amount of time. It keeps going in and out and switching to whether the back or front jacks will work, or nothing at all telling me nothing is plugged in.
Another thing is that my web cam has a mic, which is plugged in using USB, and the mic on the cam seems to record fine, and I assume it needs the sound card to do that. So, i'm guessing this is some sort of software problem because if the sound card was **bleep**ed up then the mic wouldn't be able to record, right? Well, the program I was using was showing that it was recording and the levels went up as I talked louder, so I assume it was picking everything up properly.
The audio worked fine before I brought it in for repair but I can't figure out what could have happened to break it when all he did was plug in a new power supply.
I went to the device manager and it says everything is working properly and all drivers are up to date. I also uninstalled then re-installed, disabled then re-enabled. I even went to the manufacturer's page and installed the original driver for RealTek. I also went into BIOS to make sure onboard audio was enabled. Every troubleshooting option I have on my computer says everything is working fine, but that there are no speakers plugged in even when they are.
Also I should mention, when the sound does come back on, it's pretty low and sometimes muffled, and sometimes the monitor speakers will make a dim clicking kind of sound, but not all the time. One person told me it was a known issue with the latest windows update, but I haven't done an update since I got the computer back and I couldn't find any info on that anywhere on the internet.
Thanks to anyone who has any suggestions!

Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
Thanks in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Will Not Boot Up: Pavilion Slimline PC 400-314 desktop

Have a new Pavilion Slimline PC 400-314 desktop. Power green lite is on at back of computer but will not boot up when "On" button is pushed and held. Can you help?

Hello @Bill1303,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the green light on your power supply is lite up on your HP Pavilion Slimline PC 400-314 Desktop PC, yet it will not power on when you push the power button. If you can hear things going on when you push the button then I would like you to follow the steps set out in the HP Support document: Screen is Blank after Starting the Computer.
If on the other hand nothing happens when you push the power button then the issue you are describing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP Pavilion Slimline s3707c PC will not boot up all the way

HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
Entering Setup
<F10=setup> <F11=System Recovery
<Esc=Boot Menu> <F9=Diagnostics>
Tried to install recovery disc; did not respond.
[Personal Information Removed]

Hi wjackson95,
When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
For more detailed boot troubleshooting, see this HP Support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Printing from HP dv9927cl wireless to HP Pavilion Slimline S5120F

Printing from HP dv9927cl wireless to HP Pavilion Slimline S5120F attached USB to HP Color Laserjet 1600 works only if I turn desktop off /on, prints while boot up. It work fine with VISTA 64bit, but not with Windows 7.

You could try this solution, modified for your hardware, of course.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Please help! Peripheral does not appear to be plugged in on Pavilion Slimline 400-224

Hi,
I just purchased a HP Pavilion Slimline 400-224 two days ago and the internal sound system doesn't work. There's a red x icon on the speaker icon.
I plugged up headphones to the headphone port in the front of the tower and I the sound worked. However, there's no sound when I unplug the headhpones.
Is this the way it's supposed to be?
1. Product Name and Number
Pavilion Slimline 400-224
2. Operating System installed (if applicable
Windows 8.1
3. Error message (if any)
The peripheral does not appear to be plugged in. Check your connections.
4. Any software/hardware changes made to your system before the issue occurred
None. Nothing is installed or changed. I bought the computer two days ago, opened it a couple of hours ago and the internal sound system is not working.
Please advise.

Hello Tanel35,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not getting any sound from your recently purchased Pavilion Slimline 400-224 Desktop PC. I am providing you with an HP Support document: No Sound from the Speakers (Windows 8), which will walk you through identifying what is the issue and fixing it. Do not worry that the document is for Windows 8 the steps are the same.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Pavilion Slimline s7700e Display brightens but is blank when waking from sleep.

When the computer wakes from sleep it seems to come up normally but the screen doesn't work. It brightens and there is a line across the top of the screen but it doesn't show anything. If I shut the computer down by holding the power button in and start it up again everything comes up normally.
I have recently assumed care of this computer. In investigating this problem I found that the computer had never been updated. Have since installed all Vista updates. Went to HP site and installed updates (including BIOS), changed power options and am still having the problem.
Do not know what else to do.
Would appreciate any ideas.
Thank you

Hello BrotherLouis,
Welcome to the Forums!
I saw your post about the monitor on your HP Pavilion Slimline s7700e CTO Desktop PC showing a line across the top of the screen when it wakes up from sleep mode. I am going to recommend looking at the troubleshooting guides I have located for you below. The first link is specific to your exact issue and the second is covering all Display Quality Issues for the monitor.
Solid horizontal or vertical red, green, or blue line
Display Quality Issues
I hope this helps you!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp pavilion slimline s5-1114 video

Similar Messages

Maybe you are looking for