HP Pavilion Slimline s5-1445br - Windows 7 32&64bit drivers.

Hello everyone,
I had to install 4 HP Pavilion Slimline s5-1445br with Windows 7 32&64 bit.
Now I need to find driver for USB Bus controller; Display adapters; PCI Bus; Network Adapters
Can anyone please help me?
Thanks a lot.
Ed.

Hi, Ed:
Use the W7 x64 bit drivers from this model which has the same motherboard as the one in the s5-1445br.
They are all listed under the original driver section, and you can install the usb 3.0 driver update listed under chipset if you want.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5231...
You will have to try and find W7 32 bit drivers on your own. I don't think it is going to be easy.

Similar Messages

Pavilion Slimline 400-034 Windows 8 not detecting 2nd Monitor

Hello, I have a Windows HP computer, and I recently bought a 2nd monitor for my birthday, link click here. I have the same monitor for my first, and that works perfectly fine, when I bought the 2nd monitor, I realized I have a different port, and it's not a DVI-I, it's a DVI-D. So I bought a VGA to DVI-D connector, so I plugged my VGA into the connector and then plug the DVI-D into the tower. I turned on my computer, and the 2nd monitor wasn't detected, the DVI-D connected one, but the first one was. The monitor was set into mode auto, so it detected any working inputs, DVI, VGA, HDMI, and another. The 2nd monitor works thought while into the DVI-I port, but neither work in the DVI-D port. Any help (: ??

Here are the specs for you HP Pavilion Slimline 400-034 Desktop Computer and here is the user guide for your Insignia™ - 24" LED HD "NS-24EM51A14" Monitors. Based on the specs of your computer, it has one DVI-D (digital only) output and one DVI-I (digital and analog) output as shown below;
#3 - DVI-D (digital only) #4 - DVI-I (digital and analog)
According the user guide for your Insignia monitors... VGA, DVI-D, and HMDI inputs are available. Using a passive DVI-to-VGA adapter will work on the DVI-I port because it supplies both digital and analog signals. Using a passive DVI-to-VGA adapter will NOT work on the DVI-D port because it only supplies digital signals. Please remove both DVI-to-VGA adapters and VGA cables and replace them both with DVI-D cables. You can purchase these cables online and at most local retail store such as Fry's, Best Buy, Walmart, Target, Radio Shack, Staples, Newegg, Office Depot, etc. Once you have purchased two DVI-D cables, please connect your hardware as follows;
Computer ---> DVI-D cable ---> Monitor #1
Computer ---> DVI-D cable ---> Monitor #2
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavilion 15-p229ax using windows 32bit or 64bit ?

Guys, anybody know about the OS of my laptop (HP Pavilion 15-p229ax AMD) ? 32bit or 64bit ?

Hi: I recommend you install a 64 bit operating system. It will be easier to find drivers for it and if you ever want to add memory you will be able to, since with a 32 bit operating system you are already at the max.

Hp pavilion dv7 6197sl with windows 8.1 and drivers

HI. i upgrade my laptop to windows 8.1, tried to install all driver for all the intel and amd components from hp support site, but most of them are only compatible with windows 7.
Is there anyting i can do make these drivers working?
thanks.

Hi there @Carvin00
Welcome to the HP Support Forums!
I understand that you are looking for drivers for your notebook, for Windows 8.1. Unfortunately that model was only ever sold in configurations with Windows 7, and so HP has not made any customized drivers for it.
See the following which offers a few options: What if I Don't See My Operating System?
Other than that you can either return to Windows 7, and the supported drivers from HP, or if you really want to use Windows 8.1 on this machine, you can use the options in that link. It is certainly possible to find drivers for Windows 8.x, but there is no guarantee that those more generic drivers will work with the set of hardware in the notebook.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

P4N Diamond, windows xp pro 64bit drivers

Hey, when will the windows xp professional 64 bit drivers come out for the P4N Diamond? I'm stuck with no sound at the moment, and no other drivers so I do not have any of the specials that come with the motherboard, and some of the usb sockets keep not working for no apparent reason, its blasted annoying!
Cheers, Greg

Woops, it's a habit since I have the AMD NF4
Here are the ones for intel:
http://www.nvidia.com/object/nforce_nf4_winxp64_intel_7.13.html

HP Officejet 6000 609a - Windows 8.1 64bit drivers

Hello!
I recently upgraded from Win 8 to 8.1. My printer (Officejet 6000 609a) was working fine under Win 8, but it seems to make trouble under 8.1.
The drivers page doesn't seem to list Windows 8.1 (64 bit) drivers.
Is there anything I can do to get my printer working again?
Cheers

Hi,
Reinstall Full Feature Software and Drivers (from the following lnk) will help:
http://ftp.hp.com/pub/softlib/software12/COL31332/bi-109450-2/OJ_SF_6000_E609_Full_Win_WW_140_408.ex...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavilion Slimline Windows 7 64-bit: "No speakers or headphones are plugged in" error message

I have an HP pavilion slimline, model s5120y, with Windows 7 (64-bit).
I just got my power supply replaced and when I brought it home and plugged everything in, I couldn't get any sound. It told me no audio devices were plugged in, but my monitor with speakers was plugged into the audio jack in the back, the green one (it's an onboard sound card and NOT HDMI). I also tried my headphones and same thing, so I know it's not the monitor.
So then I tried the jack in the front and it worked, although the sound was really low, even with the volume turned all the way up. But, then like an hour later it went off again giving me the same message that no devices are plugged in. I tried the back jack again and then it worked again for a short amount of time. It keeps going in and out and switching to whether the back or front jacks will work, or nothing at all telling me nothing is plugged in.
Another thing is that my web cam has a mic, which is plugged in using USB, and the mic on the cam seems to record fine, and I assume it needs the sound card to do that. So, i'm guessing this is some sort of software problem because if the sound card was **bleep**ed up then the mic wouldn't be able to record, right? Well, the program I was using was showing that it was recording and the levels went up as I talked louder, so I assume it was picking everything up properly.
The audio worked fine before I brought it in for repair but I can't figure out what could have happened to break it when all he did was plug in a new power supply.
I went to the device manager and it says everything is working properly and all drivers are up to date. I also uninstalled then re-installed, disabled then re-enabled. I even went to the manufacturer's page and installed the original driver for RealTek. I also went into BIOS to make sure onboard audio was enabled. Every troubleshooting option I have on my computer says everything is working fine, but that there are no speakers plugged in even when they are.
Also I should mention, when the sound does come back on, it's pretty low and sometimes muffled, and sometimes the monitor speakers will make a dim clicking kind of sound, but not all the time. One person told me it was a known issue with the latest windows update, but I haven't done an update since I got the computer back and I couldn't find any info on that anywhere on the internet.
Thanks to anyone who has any suggestions!

Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
Thanks in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Pavilion Slimline S5: Internal HDD Failure, PC Won't Boot

My HP Pavilion Slimline S5's internal HDD failed and died recently (bought in 2011). My HP warranty was long gone.
The startup screen showed this message:
1720-SMART Hard Drive detects imminent failure
Failing Drive: SATA0
Failing Attributes: # 05
I have several questions regarding this issue:
Is it caused solely by HDD failure? I want to replace it myself, but I'm not really sure if there are any other parts to be replaced. Or will it be better to bring it to computer shop to have it checked thoroughly?
Can I replace it with Seagate Barracuda 3.5" (7200rpm, 1 TB, SATA 3 or 6)? I think current HDD is Hitachi.
Do I still need to transfer Windows OEM after the HDD is replaced?
Thanks in advance.
This question was solved.
View Solution.

While not entirely sure what that error code means but I think it just means that the OS is not installed and the booting sequence has failed. In my posting about the cloning process, nowhere did we discuss being able to boot the PC to the new drive before attempting the clone, so that process is next or just use the Recovery set on the new drive.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

How do I operate multiple monitors on my HP Pavilion Slimline Pavilion s3600t?

Hello HP Forum,
I am looking to operate 2 monitors on my HP Pavilion Slimline Pavilion s3600t that currently has GeForce 7100/NVIDIA nForce 630i. I am not a computer technician and only semi-tech saavy (less than more). I was told I needed a video card; however, I don't know what I need nor how to install it. Can anyone tell me what I type of video card I need to purchase (and why) and then point me to a video or instructions on install?
Further, what would it take for a computer to operate 3 monitors? Would this computer capable of operating 3 monitors? And what would that entail/how does it compare to installing options for 2 monitors?
Thanks for your help guys!
Cheers

Hi JuHo, I see that you would like to know how to connect multiple monitor's to your computer. I do have a document that will assist you with this task. Please click on the link to get to the document. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bph03739&lc=en&product=3832297&tmp_...
This document is for Windows Vista and XP. If you are using a different operating system, please let me know and I will research the issue more for you.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop

Hi! I am having problems with my HP desktop computer and wonder if someone can help me solve this issue.
My CD/DVD drive is no longer working on my HP Pavilion Slimline s3720y desktop. When I tried to test my CD/DVD drive to ensure it it was working properly , When I clicked to open Hardware Diagnostic Tools and it said "The software program is not found". The CD/DVD drive was working but will not respond or recognize that a disk is in the drive. It states insert disk in drive. Where are my diagnostic tools that are missing?

Hi,
Your Seagate update CD is to update the firmware for Seagate hard drives.
Did you try the tips in the post that I referenced above?
Error 31 indicates that the driver is not installing correctly.
Go to Device Manager, locate the CD/DVD drive, open up the CD/DVD drive, double click, click on the Driver tab, then uninstall the driver. Now reboot your PC and Windows will re-install the driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Printing from HP dv9927cl wireless to HP Pavilion Slimline S5120F

Printing from HP dv9927cl wireless to HP Pavilion Slimline S5120F attached USB to HP Color Laserjet 1600 works only if I turn desktop off /on, prints while boot up. It work fine with VISTA 64bit, but not with Windows 7.

You could try this solution, modified for your hardware, of course.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Please help! Peripheral does not appear to be plugged in on Pavilion Slimline 400-224

Hi,
I just purchased a HP Pavilion Slimline 400-224 two days ago and the internal sound system doesn't work. There's a red x icon on the speaker icon.
I plugged up headphones to the headphone port in the front of the tower and I the sound worked. However, there's no sound when I unplug the headhpones.
Is this the way it's supposed to be?
1. Product Name and Number
Pavilion Slimline 400-224
2. Operating System installed (if applicable
Windows 8.1
3. Error message (if any)
The peripheral does not appear to be plugged in. Check your connections.
4. Any software/hardware changes made to your system before the issue occurred
None. Nothing is installed or changed. I bought the computer two days ago, opened it a couple of hours ago and the internal sound system is not working.
Please advise.

Hello Tanel35,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are not getting any sound from your recently purchased Pavilion Slimline 400-224 Desktop PC. I am providing you with an HP Support document: No Sound from the Speakers (Windows 8), which will walk you through identifying what is the issue and fixing it. Do not worry that the document is for Windows 8 the steps are the same.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

No Sound on HP Pavilion Slimline s7520n PC

I have no sound on my HP Pavilion Slimline s7520n PC. It uses Realtek AC97 Audio. This sound card is on the Motherboard.
I did all the troubleshooting steps and it says everything is working properly. Nothing is muted.
I have tried updating the driver but it says I am using the most updated driver already. So that did not fix the sound.
I tried plugging in headphones to see if there was sound that way and there is not.
I noticed the sound was not working after a Microsoft Update but can't say for sure that it caused the problem or if it just happened about that same time.
I tried asking Microsoft Support for help and they sent me a link to download a driver. It did not fix the sound and they suggested I re-install WinXP I have not done that yet because I really did not want to loose all my data if I don't have to. If it is the sound card gone bad I would be doing that for nothing. I am in the process of saving all my music and photos to CDs just in case I have to reinstall XP.
Someone suggested just installing a new sound card and assuming the Slimline has a open slot in it
I would need instructions on installing a new sound card.
Anyone else had this problem or have other suggestions on fixing the sound? Thanks for any help.

Go to the Control Panel --> Sounds and then right mouse click on Playback and make sure you don't have a disabled device. Do the same for Recordings. Do the speakers under the Playback tab have a green check mark?
The other thing to check is to go into Device Manager and make sure that there are not any yellow exclamation points for yellow question marks. A red X on the Sound device is also not good. Click on the Sound device and then right mouse click (properties) on each sound device and see if all are working.
Lastly, since you have the Sound driver downloaded, you could try uninstalling the sound driver and then reinstalled it.
You read all these articles, right?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion Slimline s5-1126 with 2 monitors has screen resolution issue

I have 2 HP Pavilion Slimline s5-1126 PC with HP 2031 dual monitors on each computer. Both computers were first started with only 1 monitor and everything worked great. I have now added a second monitor to the DVI output on each and the monitors on both systems connected to the DVI don't display correctly. I checked the display settings and the number 1 monitor said PnP Generic Monitor and number 2 monitor said HP 2031. I did a detect on the display and it did not change. I switched the monitors and the monitor connected to the DVI is still incorrect. There is no option to change the resolution either on the number 1 monitor. It appears to me that it just does not recognize the monitor. The strange thing is that both computers are doing this. I set an identical system up last week and it worked great. Any help will be great

@Clay...
Please read the info at this other post; New HP Pavilion PC Can't Change Monitor Resolution. The common thread here, seems to be AMD Hudson Socket FM1 systems using DVI (digital) output with 20" LCD monitors. And your setup falls into this category.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

No sound after upgrading video card on Pavilion Slimline?

Note: Solution follows this post.
I submit this due to the fact that I could not find a suitable resolution for this problem in these forums. Hopefully someone else can receive some benefit from it.
I just upgraded my video card in my Pavilion Slimline to an PCI-E ATI 4650. After the upgrade I get no sound whatsoever from the Realtek HD sound (onboard). In checking the property sheet of the soundcard, I can see that the Realtek device is set to use HDMI output. This is fine except for the fact that HDMI is not being used. I am using the Analog plug on the rear of the soundcard.
Windows 7 x86
4G Ram
ASUS TV Tuner
ATI 4650 PCI-E Video

The resolution that worked for me is as follows:
1.) Open device manager and disable any other installed audio devices. (For me this was the ATI HDMI audio device that is installed with the ATI Video Card and also the Audio device used by the ASUS TV Tuner I have)
2.) With only the Realtek Audio device enabled, reboot. Be ready to press F10 to get into your BIOS setup options.
3.) Within your BIOS find the settings for your onboard Audio device. Change that setting from "Auto" to "Enabled". Save your changes and reboot. (This step may or may not be necessary but is included here as a precautionary measure just in case.)
Upon reboot your sound should be working properly. (Mine was)
4.) Now go back into Device Manager/Audio properties and "Enable" the devices you disabled earlier. Check to make sure sound is still working afterwards. If all is still working, reboot and check it again just to be sure.

HP Pavilion Slimline s5-1445br - Windows 7 32&64bit drivers.

Similar Messages

Maybe you are looking for