HP Pavilion tx1000 cannot start

My HP Pavilion tx1000 cannot start at all. When trying to turn it on, all the lights turned on including the cooling fan runs for just one second, and then totally powered off. No matter how many times I tried, always doing the same thing.
Recently, I dissamble the machine taking out all the accessories, now just motherboard with power cord (no battery), cooling fan, and power switch. No change and no luck.
Anyone can help?

hey you
i got nearly the same problem, my is working well till is getting hot and then stop working, after he rest and getting cool is working again..
questions : do you find out wait is the problem?
there is a part that i can change to making work again?
please let me know
thanks
tavut

Similar Messages

Pavilion dv9700 DVD/CD ROM stopped working: Code 10 (This device cannot start.)

I have a HP Pavilion dv9700 running Windows 7 where the DV)D/CD ROM drive fails to be detected. I can still get it to open and close. The device manager gives an error: Code 10 (This device cannot start). I read somewhere that iTunes upgrades can cause DVD problems in HPs, and I did upgrade iTunes a couple of days ago. I did upgrade the BIOS a few moments ago, but it didn't help. Thank you in advance for any help you can provide.

Thank you for the responses! Sorry it took me so long to implement--I wanted to back everything up first before messing with the registry. Following the instructions to delete lines in the registry AND uninstalling iTunes allowed for the DVD/CD ROM to pop up with an exclamation mark in my Device Manager. Updating the driver did not help as the computer said the driver was up-to-date. Mysteriously, when I rebooted, the DVD/CD ROM disappeared from the device manager again. I forgot to mention in the initial post that the DVD/CD ROM light blinks steadily at about two blinks/second. Any other ideas? I am wondering if this is a hardware failure now.

This device cannot start. (Code 10): is the message i get on my Pavilion Dv7-

There is a yellow tag on the Ads Instant HDTC PCI in the device manager. when I check the details I recieve this message:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
When I check fr solutions it says this device is installed properly.. Can anyone help?

Right click on it select uninstall >> clcik on Action > scan for hardware changes. >> drivers will be reinstalled >> restart the PC
if you have internet connection then right click on it and select update drivers.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Drvice Manager /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.Device cannot start Code 10

Product Name and Number:
HP Pavilion Dv9700
s/n [Personal Information Removed]
p/n FE395UA#ABA
Operating System:
Windows Vista 64bit
Current Issue:
When I open my Device Manager there is an /!\ next to NVIDIA nforce 10/100 Mbps Ethernet.
When I open it's properties there is a message under the Device Status stating:
"This device cannot start. (Code 10)"
It gives me the option to "Search for solutions" which has proven unsuccessful.
Also, I have the latest driver installed.
This question was solved.
View Solution.

Hi,
Right click the device itself and select Uninstall. When this has completed, restart the notebook and let Windows re-discover the device and then check in Device Manager again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Intel Management Engine Interface, Device status: This device cannot start (Code 10).

hi Tec,
Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
Issue: my computer auto restart after 2 hours please resolved the issue
Logs captured from System summary:
[Problem Devices]
Device PNP Device ID   Error Code
Intel(R) Management Engine Interface
PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.
Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled.

Hi Jeenny,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hp Pavilion Tx1000 Bad Bios Flash

Hi everyone, I recently bought and hp pavilion tx1000 series (tx1030la) it has the common overheating problem in wich the GPU chip desolders, I fixed it with the help of some youtube videos (the penny fix) and everything was working perfectly until I decided to update the BIOS, I downloaded the latest bios for the machine from the official hp webpage, ran it and everything was going ok, then suddenly the fan started spinning like crazy and the computer shutted itself down, I knew that bios update had possibly failed and waiting for the worse I turned the computer on, It did nothing other than beeping in a pattern of 1 long beep then two short beeps, after trying the CRISIS method for recovering the bios without luck I read somewhere that the beep pattern exposed by my machine has something to do with a gpu failure, I tried the Fix I did the first time to solve it with no luck, and now I don't know what else to do as there is very few information regarding to the tx1000 Bios failure, there are much people fixing a bad flashed BIOS in DvXXXX models but none on txXXXX models, right now I'm desperate and I need the computer so bad, I tried The CRISIS fix with an usb stick as I don't have an USB floppy and the process reaches a point at where the computer starts to making a buzz sound and then a beep, buzz sound beep, and it keeps on doing it but never really finishes the flashing procedure, it seems to be reading the usb drive on the beginning but nothing happes, if i hold the windows key + b or Fn key + B makes no difference, the computer does the same if the Usb stick is connected and has the files for CRISIS recovery, but if the usb is not plugged the computer keeps on its one long two short beeps, please some help me i really need the computer, is there any chance to recover it by CRISIS!?, I can also buy a damaged tx1000 motherboard and take out the bios chip and replace it in my machine, you think that this will work!?

I think the gpu has failed again, if the bios was dead you would get no beeps, it is the bios that generates the hardware failure beeps.
Home brew reflows generally do not last too long or can cause more damage.
The reason the gpu comes loose on most of that vintage was due to 2 problems
1. Overheating
2. Poor quality solder used when the gpu and other motherboard components were flowed at the factory.
Reflowing it does not always work because of the quality of the ball solder they used, also you only get one reflow attempt, doing more than one weakens the original solder even more. Most likely the seller reflowed it shortly before selling it to you.
Proper repair is what is called a reball (solder replacement) of the gpu, not may repair facilities have the equipment to performed this, and is usually expensive procedure depending on the motherboard design.

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

Audacious, skin problem. Cannot start.

Hello.
I just installed Audacious player, but I cannot start it. When I try to run the player, I get the following error message:
Unable to load skin.
Check that skin at '(null)' is usable and default scin is properly installed at '/usr/share/audacious/Skins/Default'.
I have the default skin in /usr/share/audacious/Skins/Default directory. I do not know what the first part of the message means (Check that skin at '(null)' is usable...). Can someone give me a hand.
I do not know what else information to post. If you need to know anything for my system, I will post the info. I have Arch GNU/Linux Core Dump, kernel: 2.6.24-ARCH. The system is installed as "Basic", I am using fluxbox ... If you need anything else ...
Regards.

OT: I'm sorry. I just couldn't help laughing at the subject, which makes perfect sense within the Linux context but which sounds truly bizarre otherwise.

Installation of Oracle 11g on RHEL 5 (Listener cannot start )

Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
Thanks

Dear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W.

How to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer

how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

ERROR: Cannot start mail services, configuration directory does not exist

I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?

Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Cannot start Outlook 2013: "name cannot be resolved" / "connection to Microsoft Exchange is unavailable" / "___.ost is not an Outlook data file (.ost)"

My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
Name".
2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
Help?

Hi,
As per this KB article, the issue might occurs when some required registry key does not exist on your computer.
Please try the steps mentioned in it and see if it is helpful to you:
http://support.microsoft.com/kb/2264398/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

HP Pavilion tx1000 cannot start

Similar Messages

Maybe you are looking for