Hp pavilion xz185ua Windows 7

the message is "bootmgr" is missing and therefore the computer will not start up. How do I fix this?

Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
1) Run the Hard drive test on the unit if it fails then you need to replace the part. If the test passes go to steps given below.
Testing a Hard Disk using the Built in Self Test
2) Try doing a system restore to the date where unit was working fine using F11 option incase if this does not work you could run a recovery on the unit before this kindly back up your data as it will be lost.
Restore the PC to its original condition using the f11 key
In case unit does not load to F11 then you can order the disc from the web link given below.
Order Recovery Discs for Windows 7, Vista, or XP
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth

    Just got a new Ipad mini 32 and can't connect to my HP Pavilion DM1 windows 8 via bluetooth. I get to the stage where you have to confirm on both systems the generated code and then it goes in error. Not supported. Any clue ?

    Unless you have an iOS app that uses BT for a specific purpose, such as file transfer, BT on the iPad alone, as stated, does not support it.

  • My HP Pavilion g4 windows 8 laptop keeps freezing up can i fix it

    Ok my HP Pavilion g4 Windows 8 locks up n freezing up can i fix it .

    Hello @Stellafaye,
    Welcome to the HP Forums.
    I see that your notebook locks up and freezes. I will try to assist you with this issue.
    I recommend starting with this document: Computer Locks Up or Freezes (Windows 8).
    Please try the steps provided and let me know how you make out.
    If you require further assistance after this, could you provide the Model and Product numbers please.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • I have a new laptop, HP Pavilion with windows 8.1. I downloaded iTunes for 8.1 and tried to backup my iPad mini. iTunes said it did, but most of the music did not transfer also, I down loaded a music CD and asked iTunes to sync, it will not add

    I have a new laptop, HP Pavilion with windows 8.1. Downloaded iTunes and plugged in my iPad mini. selected backup. iTunes will not back up all the music. And when I Imported a music CD to iTunes and selected sync, it will not upload that music to my iPad.

    Media is not included in device backups.
    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Fingerprint reader not working - HP Pavilion dv7 - Windows 8

    I have been working on this for over a year without any results. It is driving me crazy.
    My fingerprint reader on my pavilion dv7 is not working. Actually it never worked (or showed any sign of action) since i bought my laptop.
    I've tried installing many kind of different drivers and software, updated BIOS etc. Nothing works.
    So i decided to call for your help. 
    Laptop info;
    HP Pavilion dv7
    Windows 8 64-bit
    Bought 1 year ago in The Netherlands
    p/n: B1X38EA (#ABH)
    Help would be greatly appreciated
    Greetings,
    Glenn Peters

    Hi,
    Please refer to the following two documents.
    Troubleshooting a Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03718240
    Using HP SimplePass Fingerprint Reader (Windows 8): http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&dlc=en&docname=c03653209
    Please follow all the troubleshooting steps and let me know whether it helped.
    Please support me by clicking on Kudos and Accepted solution if you like my advice. These are the best ways in which you can thank me.
    I am an HP Employee. 

  • HP Compaq Pavilion DV2130US Windows 7 32 Bit audio Driver

    I cannot find the HP Compaq® Pavilion DV2130US Windows® 7 32 Bit audio Driver. This unit also comes with a small remote that I assumes runs on blue tooth. This also does not work. Are they linked together.

    Hi:
    Did you try the Vista audio driver from your notebook's support and driver page?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-49193-1&cc=us&dlc=en&lc=en&...

  • Pavilion dm4 windows 7 idt high definition audio codec v 6.10.6324 distorted audio playback

    Suspect Windows 'pushed update' changed original IDT High Defition Audio CODEC becasue original worked fine since HP Pavilion dm4/Windows 7 was purchased. Sound plays, but periodically buzzes and is distorted. Have tried both rolling back driver and installing your Support driver sp57966.exe with BIOS load. Still no change, same distorted sound both times. Is there a way to return to original CODEC?

    Hi,
    Have you tried using Recovery Manager to reinstall your original IDT Audio Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

    Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

    Hi,
    There are Three main ways to restore your notebook to format your HDD and return the notebook to its 'Factory Condition' - see the document on the link below.
    Performing An HP System Recovery - Windows 7.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Services stopped in task manager. hp pavilion a6700f, windows vista 64-bit

    after installing a program , pc stopped working.  when i checked task manager in safe mode I found that all services stopped.  I tried system restore but i was not given the option to create a restore point.  "create" was removed from the tab.  now how do I go about fixing this issue?
    hp pavilion a6700f, windows vista 64-bit,

    Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.   
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
    If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Cannot connect my Officejet 8500 a909a to my HP Pavilion dv7 Windows 7 64-bit

    I have never been able to setup my Officejet 8500 A909a printer using my HP Pavilion dv7 Windows 7 Home Premiun notebook PC. After enumerable attempts I gave up and just used a thumb drive to transfer my printing from my notebook to my old tower PC and printed it from there. Well, my tower died and I really need to be able to print and scan from my notebook. I installed/uninstalled/reinstalled the latest printer driver with no liuck. I have also tried using the HP Print and Scan Doctor. It tells me I don't have all the needed software but when I click on Install, it fails too. Any suggestions?

    Hello there! Welcome to the forums @michaeldq 
    I read your post about the issues you've had with installing your Officejet 8500 A909a printer on your Windows 7 system. I understand it fails however, could you send me a screen shot or more information about the failure? You may see a Fatal Error message and a code when you look at the error logs.
    In the meantime, you can try a Clean Boot, restart the PC, temporarily disable any Firewalls and/or Anti-Virus' you have running.
    Try running the installation again. Go back into the Clean Boot options to enable the start up programs again.
    Please keep me posted on the results and info!
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • CAn I watch DVDs on my laptop? pavilion g6, windows 7

    CAn I watch DVDs on my laptop? pavilion g6, windows 7
    This question was solved.
    View Solution.

    Hi,
    G6 is a series of many models, what is yours. Normally the laptop should come with a software which allow you to watch DVD movies on your computer (given it has DVD player). The software can be PowerDVD:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Pavilion dv9812us - Windows XP reinstall / nForce drivers won't install

    I had a funky virus on my Pavilion so I decided I would format and reinstall XP (my computer came with Vista but I'm not really a fan). I see an nVidia splashscreen come and go and then the installshield wizard comes up and loads the installation files... and then disappears. As far as I can tell, the installer crashes every single time I load it. I also tried downloading the unified drivers from nVidia's website, and the same thing happened. So my question is, how can I get these drivers to work? I really need to get my computer working because it is an integral part of my job... so double thanks in advance to anyone willing to help me on this.
    Here are the specs:
    Product Number KN876UA#ABA
    Microprocessor 2.00 GHz AMD Turion 64 X2 Dual-Core Mobile Technology TL-60
    Microprocessor Cache 512KB+512KB L2 Cache
    Memory 3072 MB
    Memory Max Up to 4GB DDR2 (Up to 1 GB may not be available due to 32-bit operating system resource requirements)
    Video Graphics NVIDIA GeForce Go 7150M
    Video Memory Up to 1071 MB
    Hard Drive 250 GB (5400 rpm)
    Multimedia Drive LightScribe Super Multi 8X DVD±R/RW with Double Layer Support
    Display 17.0" WXGA+ High-Definition BrightView Widescreen Display (1440 x 900)
    Fax/Modem High speed 56K modem
    Network Card Integrated 10/100 Ethernet LAN
    Wireless Connectivity Wireless LAN 802.11a/b/g/n
    Sound Altec Lansing speakers
    Keyboard 101-key compatible
    Pointing Device Touch Pad with dedicated vertical and horizontal Scroll Up/Down pad
    PC Card Slots
    One ExpressCard/54 slot (also supports ExpressCard/34)
    External Ports
    5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro, or xD Picture cards
    4 Universal Serial Bus USB 2.0
    1 VGA (15-pin)
    1 RJ-11 (modem)
    1 TV-Out (S-video)
    1 RJ -45 (LAN)
    2 headphone-out
    1 microphone-in
    1 notebook expansion port 3
    1 IEEE 1394 Firewire (4-pin)
    1 Consumer IR
    Dimensions 15.16 (L) X 11.22" (W) X 1.65"(H)
    Weight 7.7lbs
    Security
    Kensington MicroSaver lock slot
    Power-on password
    Accepts 3rd party security lock devices
    Power
    65 W AC Adapter
    8-cell Lithium-Ion (Li-Ion)
    What's In The Box
    HP Pavilion WebCam with Integrated Microphone
    Mobile Stereo Earbud Headphones (1 pair)
    HP Mobile Remote Control

    OK, I booted into safe mode, removed the old VIA drivers from the %systemroot%\system32\drivers folder, and then saw that the nForce2 drivers from a previous install were in Add & Remove Programs.  I believe that to be my entire problem.  So I uninstalled all NVIDIA drivers.  Rebooted into Safe Mode.  Installed all the 5.10 drivers with success, excluding the sound driver cuz I don't need it.  Rebooted.  Windows hangs during loading screen.  Reset, then I hit F8 and choose Last Known Good Configuration.  Remove all NVIDIA drivers again.  Reboot into Safe Mode.  Install one driver at a time and reboot inbetween.  System hangs because of the IDE driver.  So, choose Last Known Good Configuration again, uninstall all NVIDIA drivers, reboot to Safe Mode, reinstall all drivers but IDE, then boot Windows normally.  Needed to install display driver, as I have a NVIDIA card.  Did that, disabled nwiz and NvMcTray in msconfig as I always do.  Reboot.  My SYSTEM registry hive is corrupted.  So after wiping Linux (which I never use anyway cuz my modem is not Linux compatible) off my other drive and installing Windows and the Internet on it, I found out how to take the registry from a previous Restore Point and copy it to the config folder.  Did that, booted to that drive, had to uninstall and reinstall all NVIDIA drivers again, but it works now.  I don't have tons of System devices like you Fredrik, but I do have 3 Motherboard resources, which is weird.  Whatever.  Thanks for all your help, guys

  • HP Pavilion 750n - Windows XP Blue Screen of Death Error

    Hello everyone - I hope I can get a reply to fix my son's computer (I can't afford to buy a new one).
    I received the blue screen of doom and I was not aware that Windows had a patch to fix this before the error occurred.  I tried to restore my system to when I first bought this computer without losing all my data (specially my pictures).  Now the system starts but it gets stuck on the page that asked if you want to logon on Safe Mode or Regular Mode, etc.  No matter what I choose the system keeps coming back to this same screen.
    I read the following on the HP web side but I'm not sure how to get this diskette/cd or whatever they have available:
    Preventing a Windows XP Critical Error
    If you purchased your HP Pavilion home PC between September 2001 and February 2002, your PC may experience a Microsoft® Windows® XP critical error. To prevent an error that may cause your computer to be unusable, HP strongly recommends that you go to the Microsoft Windows Updates Web site to download all critical updates. Without these updates, an Unmountable Boot Volume error may occur randomly, and if it does, the error creates a blue screen with the message: A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME…Technical Information: *** STOP: 0x000000ED
    If this error occurs, you will be unable to fix the problem without a diskette that you can order from HP Technical Support.
    The system won't let me send HP an email and I can’t see how to contact them just to ask for a price.  Perhaps, there may be another place where I can get the diskette for this fix - does anyone know how to get the diskette or if I can download the fix from somewhere else? 
    Any help will be greatly appreciated!

    Get BartPE or Ultimate Boot CD and you should be able to get the computer to a state that will allow you to copy your files.
    If you have a spare computer or HD, configure the problem HD as a slave and you should be able to access your files. 

  • Problem with built in camerar - HP Pavilion dv6000 - windows 7 home premium

    hello 
    i own a hp pavilion dv600 laptop with windows 7 home premium sp 1 installed
    yesterday during an skype conversation all of a sudden i lost the camera.
    at the start of the skype call i saw and heard  the other party and they saw and heard me perfectly.
    then without doing anything all of a sudden my camera went dead.
    i checked in device manager and cant see the built in webcam anywhere and neither can skype under the options menu see the camera.
    i restarted the PC and shut it down completely to no avail.
    any suggestions on how to get the camera back?

    Hi,
    Try this alternative method as follows.
    Unless you still have the installer, download the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page - and save the installer to your Downloads folder.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    Next, if you don't have an extraction utility installed, download and install 7-Zip.  Please note, if you have a 64bit installation, download and install the .msi 64-bit x64 installer on the link below.
    http://www.7-zip.org/
    Next, right click the HPSA installer you download earlier, select 7-Zip, select extract files and then click Ok.  Open the newly extracted folder, right click on UninstallHPSA and select 'Run as Administrator' - you may well see no progress of this attempted uninstallation, so leave the notebook to idle for a good 10 minutes before restarting it.
    Open your Downloads folder and delete the ‘extracted HPSA folder’ so you are just left with the original installer you downloaded.
    Now, run the Microsoft 'Fixit' on the link below and use it to install the new version of HPSA.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    'Provost' is just a term from HPs Forum Ranking.
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavilion Slimline Windows 7 64-bit: "No speakers or headphones are plugged in" error message

    I have an HP pavilion slimline, model s5120y, with Windows 7 (64-bit).
    I just got my power supply replaced and when I brought it home and plugged everything in, I couldn't get any sound. It told me no audio devices were plugged in, but my monitor with speakers was plugged into the audio jack in the back, the green one (it's an onboard sound card and NOT HDMI). I also tried my headphones and same thing, so I know it's not the monitor.
    So then I tried the jack in the front and it worked, although the sound was really low, even with the volume turned all the way up. But, then like an hour later it went off again giving me the same message that no devices are plugged in. I tried the back jack again and then it worked again for a short amount of time. It keeps going in and out and switching to whether the back or front jacks will work, or nothing at all telling me nothing is plugged in.
    Another thing is that my web cam has a mic, which is plugged in using USB, and the mic on the cam seems to record fine, and I assume it needs the sound card to do that. So, i'm guessing this is some sort of software problem because if the sound card was **bleep**ed up then the mic wouldn't be able to record, right? Well, the program I was using was showing that it was recording and the levels went up as I talked louder, so I assume it was picking everything up properly.
    The audio worked fine before I brought it in for repair but I can't figure out what could have happened to break it when all he did was plug in a new power supply.
    I went to the device manager and it says everything is working properly and all drivers are up to date. I also uninstalled then re-installed, disabled then re-enabled. I even went to the manufacturer's page and installed the original driver for RealTek. I also went into BIOS to make sure onboard audio was enabled. Every troubleshooting option I have on my computer says everything is working fine, but that there are no speakers plugged in even when they are.
    Also I should mention, when the sound does come back on, it's pretty low and sometimes muffled, and sometimes the monitor speakers will make a dim clicking kind of sound, but not all the time. One person told me it was a known issue with the latest windows update, but I haven't done an update since I got the computer back and I couldn't find any info on that anywhere on the internet.
    Thanks to anyone who has any suggestions!

    Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.   
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
    If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Two deductions for invoice with same reason code posted as one line item

    Hi We have a scenario wherein we are taking two or more deductions on the same invoice and are using the same reason code which have a setting of charge off. SAP system displays the FI posting with same reason codes with charge off setting as one lin

  • Goods Return Recipts

    Dear All when we make the customer goods return receipt with movement type 651 this movemet type is not creating any Accounting Document  on the document status when we click on the accounting button its giving the message material dose not inculding

  • Error in automatic batch classification when doing 311 movements

    I have created reference characteristics, that is, characteristics which have a direct reference to a database field (MCH1-LAEDA. LAst change). When doing the movement 311 with MIGO or MB1B the batch is not classified althougt in the MCH1 the field L

  • All my music are listed in the iTunes library, but won't sync with my iPhone

    Maybe it's because I bought a new Notebook and had to copy the music library-file unto the new iTunes-? Anyway, the phone cannot recognize the files listed in iTunes. And about syncing - all my entries in the phone book are listed three or four times

  • How to map the workflows for a project?

    We are developing a mini ERP package for a customer on Oracle 9iAS & Forms 9i. The business process contains lot of workflow process for ex:-Approval of purchase request etc. I am unable to understand how we have to map these flows using Oracle workf