Hp pavilion zx5180us drivers for hp usb digial drive

I am fixing up a zx5180us that has one device driver missing in windows xp.
sm bus controller...
I have installed all drivers listed on web site but there is nothing listed for
a hp usb digital drive that is above the cd rom...
this is the first unit that I have fixed up that has this instead of a blank.. were floppy would be.
any help would be appreciated.

I am fixing up a zx5180us that has one device driver missing in windows xp.
sm bus controller...
I have installed all drivers listed on web site but there is nothing listed for
a hp usb digital drive that is above the cd rom...
this is the first unit that I have fixed up that has this instead of a blank.. were floppy would be.
any help would be appreciated.

Similar Messages

  • How to install drivers for Ni USb 6009

    Hi
    I am trying to use an NI-USB 6009 and was wondering if its possible to install just the drivers for this hardware. I know that I can install the NI-Daq base but I would really like to install the minimum amount of software onto my computer that has linux. However, I did try to install the NI daq base and the installation is failing because of an input/output error, (I am not really sure why).
    I would really like to be able to just install the drivers for the USB-6009. I was just wondering if that was possible and where I could find them.
    Thanks

    Hi Cannonball,
    You'll know pretty quickly after installing DAQmx Base and running the lsdaq utility as to if you need different firmware. The 6008 and 6009 must have a different firmware loaded to be able to run DAQmx Base 3.x. This is not a problem though as there is a firmware updating utility that comes with DAQmx Base and it's fairly straigh forward. For more information, see the link below.
    KB 491FPHB9: Firmware Incompatibility With Different Versions of DAQmx Base.
    http://digital.ni.com/public.nsf/allkb/91CBCFE9E171C845862572CF0077D8F9?OpenDocument
    PBear
    NI RF

  • Hp pavilion tx2110us drivers for windows 7

    hello,
    i have a hp pavilion tx2110us entertainment notebook (tablet). i recently upgraded from vista home to windows ultimate. i have a few issues with this. i would be very happy if someone could help me here.
    1. the tablet buttons (on the side of the scree dont work), just the settings one works...the rotate, the dvd one dont! i had installed some driver seeing the forum but it only solved a part of the problem. i.e. the settings button for tablet. can i find the drivers for it somewhere??
    2. there is no fingerprint recognition  any more. though its not a big problem but i feel i am not getting what i paid for...;-)
    3. the images when opened in fax viewer or anyother prog seem stretched. i tried to set the screen resolution but it shows on the highest. my driver should be nvidia but currently it is standard vga. where can i find the driver for this....it is not on the hp site....i have a 32 bit os.
    4. even the software updates avalaible on hp site dont work some how. i even tried the vista ones but it says it cant load them as i have windows 7.
    thank you.

    shubhijk wrote:
    i dont have an active connection on my laptop. as in i cant be on net for too long to get windows updates. is there a way to download the display driver other than updating my drivers from the internet?
    So we will install network drivers to solve this problem.
    Install as first driver for chipset / lan card:
    NVIDIA nForce Chipset/Network here
    After installtion of this driver You need to restart your system. This is very important.
    Driver for wireless card:
    Broadcom wireless here
    Both this drivers are normally on your support page for Vista system, but they will work great under Windows 7 too.
    Only If for some reason wireless driver will not work great then uninstall it first and install latest version released by HP:
    Broadcom Wireless here (ver 5.60.48.35  for 32/64 bit Win7)
    Resource:
    Uninstalling Software in Windows 7
    Uninstall or change a program in Windows 7
    Most of Vista drivers should work under Windows 7. You may find all of them here.
    When normal installation will fail, then try to run unsuccessfully installed file in Compatibility Mode (Windows Vista, Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
    Resources:
    Make older programs run in this version of Windows
    How to Run a Program in Compatibility Mode in Windows 7
    If even this will fail then use Windows Update as I said before and install drivers from optional section.
    I don't have much knowledge about tablets, but according to other post on this board Wacom Digitizer Driver solves problem with rotation.
    This answer was wrong. According to this topic solution on problem with rotation is installation of HP Quick Launch Buttons and Graphic driver.
    Important informations!
    You've got nVidia graphic card and AMD processor. Because of that You should check temperature of your GPU.
    If it's high then You should install driver for graphic card from Windows Update as fast as it's possible.
    How You may check Your notebook CPU (processor), GPU (graphic card), motherboard or HDD temperature?
    To do that use HWMonitor (free and recommended).
    PS.
    If You will still have any problems then let me know about it.
    I will try to help You.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Help needed by Good Samaritans for info on Drivers for RS232 / USB ports.

    Dear all,
    I would first like to thank you for taking the time to read my message.
    I would like to ask all you proffesional LV developer how difficult it
    might be to write the drivers for a bluetooth-RS232(or for a Wireless
    LAN ethernet/USB access point) device using LV. Would it be better to
    write the drivers in C++?
    I have finished the LV Basics 1&2, though we did not learn something helpfull for my case.
    Are there any usefull examples i should look at?
    The signal transmitted would have a data rate of about 0.5MBbs and the LV program would just display and store the data.
    Thanks for your help

    Bogiasac
    Couple of quick points then I will allow the LV Community to reply to the specifics.  From NI's point of view we would recommend that you use the development language that you feel most confident in, so if you are a C++ guru then use C++.  Another point, you mention that you attended the LV Basic training classes.  I conclude from your comments that you were looking for specific training (while attending did you raise this with instructor at the time?), these training classes are an introduction to the LV environment and set out the ground rules how to best develop a LV application.  Our intermediate courses go into greater detail into advanced LV features - though for some this is still not deep enough (future developments in that for LV 8.0 users soon).  If you are looking for specific training please contact our Training Co-ordinator in the UK and she will be happy to advice.
    On the Bluetooth question, LV has Bluetooth tools built in.  These can be found in the Communication palate under Bluetooth (this depends on which version of LV you have, Base or FDS). Please use these VIs to develop you Bluetooth application.  There are 9 Bluetooth examples shipped with LV, these can be found by using the “find examples” in the help menu.
    Kind regards
    Joe
    NIUK

  • Beta MAC drivers for 0202 USB & 0404 USB

    Hi all,
    Just a quick message to let you know that there are Beta MAC drivers for the 0202 USB & the 0404 USB available. Please go to www.emu.com and on the home page there will be an image and when you click on it you will be directed to another URL where you can download them.
    ATB,
    - Jen -

    There seems to be a web site here http://www.eduscho.at/is-bin/INTERSHOP.enfinity/eCS/Store/at/-/EUR/TdAtBrowseCat alog-Start?CategoryName=phase_1&Entry=nlpopup
    I am not sure, as it seems to be in German, to follow any links to other items that are not groceries or Coffee.
    The same with this link http://www.germandeli.com/eduschocoffee.html
    I was hoping it would list a name like this bit does
    Hub in Apple Pro Keyboard:
    Version: 1.22
    Bus Power (mA): 500
    Speed: Up to 12 Mb/sec
    Manufacturer: Mitsumi Electric
    Product ID: 0x1002
    Vendor ID: 0x05ac (Apple Computer, Inc.)
    Yours does not seem to list the name which means we can not use that method for finding out what make it actually is.
    There was a post in this thread from EZ Jim about using a macam driver.
    These I understand are more camera Specific than other drivers which is why we needed a name.
    The one from IOXperts may be of more help
    http://www.ioxperts.com/products/webcamx.html
    9:03 PM Tuesday; May 6, 2008

  • Vista has no drivers for MacBook Pro DVD drive

    When I boot into Vista, everything works well enough but I can't use the DVD drive on my MacBook Pro. Under the device manager it's listed as not having drivers and when you tell it to find them on the internet, it comes up empty handed.
    Anyone know where I can find drivers for this drive? It's a Matsushita UJ-857D.

    I've been having the same problem. THere was a discussion with a link that no longer exists.

  • Satellite L755 Drivers for windows XP/Audio Driver

    I was unable to find exact Audio Driver for L755 for XP.
    Audio driver is unable to detect on L755 Help is required.

    There is a same problem for my Satellite L740-01R.
    http://www.toshiba.ca/web/product.grp?lg=en&section=1&group=1&product=11631&part=12296#spectop
    I downloaded a driver below, but it did not work also.
    Conexant CX20587-11Z, CX20583-10Z XP Driver 3.94.0.52
    http://bbs.gaodi.net/bios-Firmware-147143-1-1.html
    I have 2 systems in my Laptop. The sound card (CX20587-11Z) works well for Fedora 15 and did not work for WinXP.
    Help me please!!!    Thanks!!!!!!!! 

  • Drivers for ThinkVision USB Soundbar (40Y7616)

    After installation of new ThinkVision USB Soundbar (40Y7616) on Windows XP the device is not recognized by OS, it shows as "USB Audio Device" in device manager, but Windows can not find a driver, and no driver was shipped with the speakers.  Search of IBM/Lenovo download and could not find the drivers.
    If somebody can point how to download drivers it will be much appreciatied.

    That soundbar uses the standard Windows USB audio drivers, so there are no drivers to download. If it shows up as "USB Audio Device" then it is correctly installed.
    Have you checked the Sound Control Panel to make sure it is selected as the default output?
    The soundbar also has a power button and volume controls...
    I don't work for Lenovo. I'm a crazy volunteer!

  • How i can download hp pavilion webcam drivers for window 8.1 pro os?

    please tell me how can i download hp pavilion webcam driver for os window 8.1 pro i am using in my laptop

    Hi,
              Could you mention the product and model of the system for which you want to download drivers of webcam.
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Toshiba, make Linux - Ubuntu drivers for bluetooth USB sticks

    Toshiba, please make proper Linux - Ubuntu drivers to your bluetooth USB sticks. I was surprised unpleasantly noting that there are no drivers available for Ubuntu. Please could someone explain THE reason to this kind of abortive policy towards Ubuntu users?

    The problem is Ubuntu here. The Bluetooth adapter is directly connected to the USB bus so it should work without any problems if the OS comes along with the suitable Bluez software. Try to update your Ubuntu installation (apt-get update). Check if bluez is properly installed.

  • Windows 7 no longer recognizes or allows ASIO drivers for my usb audio interfaces

    Hello All, last year I purchased a new version of Propellerheads Reason and the  Balance digital audio interface that came with the bundle.
    Everything was fine it all worked well, especially when I added asio4all drivers. (The Balance comes with its own asio driver).
    Super low latency on my keyboard and midi guitar.  I was using my midi guitar and set up at jams for several months last year and it was great!
    One day I was getting ready for the jam session and I noticed that the latency on my midi guitar became so bad that I could not play in time with the other musicians. 
    I checked out the preference/audio page in Reason and saw that my asio drivers were missing! I immediately went and down loaded asio4all again and installed it. It would show up in any of my music software. I have tried removing and re-installing
    the stock ASIO driver that came with Balance and no luck. 
    I suspect that shortly before this  huge problem ( my music software is basically useless without asio drivers) I allowed a windows update to my system. 
    I think that somehow during one of these "updates" something changed and windows 7 no longer allows asio drivers on my computer. This really sucks!
    Is there some way to get rid of the offending "update" that ruined my music system? 
    Thanks in advance!
    Don

      Thank you for your response  FangZhou Chen, unfortunately this problem started last fast, possible early November so I can't do a restore that far back.
    my best,
    Don

  • Drivers for ThinkPad USB Port Replicator with Digital Video

    I have a X220 P/N: 4291Gw9 with the port replicator P/N: 51J0246 running Windows 8 Enterprise. I tried installing the Windows 7 drivers with no luck. I can use replicator with keyboard and mouse but i dont see external monitor Sync Master 214T.
    Any workaround to this issue? I have 2 external monitors I use for work plus the laptop one as third.
    I realy need this second monitor.
    Details about my drivers versions:
    Windows 8 Enterprise + all updates
    Graphic card drivers: 9.17.10.2875
    Replicator drivers: tp_usb_prdigvid_v20620

    I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
    Please fix this Lenovo!

  • When does TM erase backups for removed USB/FW drives?

    I have a MacBook Pro running 10.6.1 and I have a 2TB Western Digital My Book Studio (formatted HFS and attached with FW800) on which I store a lot of data (about 1.2 TB).
    I have a couple of backup strategies including Time Machine (my Synology NAS acts as Time Machine server) and I would like to understand better what happens if I allow TM backups to occur WITHOUT my WD My Book FW800.
    My concern is - would TM automatically 'remove' the backups of my FW drive if it's not connected when a backup occurs? This might occur once every four backups...

    rafsanchez wrote:
    Pondini wrote:
    That's not what it says, and not what it means. That article is about when to use Time Machine vs. the Backup application (part of a Mobile Me subscription).
    Whilst the KB does mainly deal with when TM should be used and when Backup should be used, I'm not sure what you mean by "that's not what it says"? The KB does clearly state (as I quoted in my post) that "Time Machine allow you to back up data to a network volume". Perhaps Apple needs to change the text of this KB and make it clear that the "network volume" they mean is only the Time Capsule or later AirDisk.
    Perhaps you need to tell Apple that: http://www.apple.com/feedback/
    TM will do network backups, but only to a Time Capsule; or a shared disk on another Mac running Leopard or Snow Leopard on the same local network; or a USB drive attached to a (recent) Airport Extreme.
    Actually this is not correct as I have been successfully using both Synology and a ReadyNAS devices as TM volumes...all that is needed is a network volume that supports sparsebundle disk images (no firmware hacks on either the NAS or the Mac are needed).
    Yes, sometimes it will. Excuse me for not prefacing that with the word "Officially."
    There are a number of threads here and in the +Leopard / Time Machine+ forums where it works for a while, then something goes wrong, and there don't seem to be any solutions.
    There's even a chance that your backups will be useless just when you need them the most.
    I'm not worried about this because, as I mentioned in my original post, I have a couple of backup strategies
    As long as you (and others who might read this) understand the risks.

  • Custom icon for my USB flash drive?

    Alright, now I realize I'm probably missing something here, but it's getting away from me here. All I want to do is have a custom icon for my flash drive that will show up on any Mac that I plug it into.
    As it is, I can assign a coustom icon (by doing the old get-info-copy-and-paste-the-icon thingie), but it doesn't show up when I plug it into another Mac. I just get the generic disk icon. What am I missing? This has to be quite simple.

    Trey,
    I may be PITW, but I think the icons used to represent various volumes/devices are (if customized) specific to a system (not the volume/device). Thus you would have to set the custom icon for your flash drive on each system you wanted to see it.
    A WAG: I haven't the slightest idea if it would work for a flash drive, but for a CD one would drag the custom icon (.icns file) to the root level of the CD and rename it .VolumeIcon.icns before burning the CD.
    Lee C
    "The early bird may get the worm but the second mouse gets the cheese." -- Willie Nelson
    See the article Backup::Restore.
    Dual 2.5 Power Mac G5   Mac OS X (10.4.3)  

  • Drivers for HP60-443CL DVD drive with Signature for Win 8 RP

    How can I get a driver for the DVD drive on HPG60-443CL so the Release Preview of Win 8 will accept the DVD drive?  The drive is a HL-DT-ST DVDRAM GT20L.  THANKS!

    How can I get a driver for the DVD drive on HPG60-443CL so the Release Preview of Win 8 will accept the DVD drive?  The drive is a HL-DT-ST DVDRAM GT20L.  THANKS!

Maybe you are looking for

  • My hard drive failed so I sent it off to get recovered. How can I get my music back that I purchased from my old iTunes account?

    My hard drive failed so I sent it off to get recovered. How can I get my music back that I purchased from my old iTunes account?

  • Error while importing a dump

    hi gems.. i have a expdp dump of a schema and then tried to import that dump using the impdp command. the import worked but two tables got failed. those two tables have partitions and subpartitions. i use the command impdp touser/password@sid directo

  • I need to know.. various things.

    I want to transfer a photo album off the iPhone 3gs, not the camera roll, how am I supposed to do this without losing it? I've tried 3rd party software it isn't leading me to a resolve, iTunes is too stupid to understand this concept from my traversi

  • BPM Control step issue

    All, We have had a BPM scenario that was working in the XI3.0 and we exported and imported the same into another environment PI7.0 In the new environment - there is a control step that raises time out after 2 minutes, that doesnt seem to happen. The

  • How to fix back my iphone 4 ?

    My iphone 4 was fell on the ground and now it was charging but after serval hours it still cannot open the iphone to the lock or home screen just have the the apple sign there and it is low battery before it fell so now i keep on charging it ! I need