Hp pavillion 15-b142dx usb 3.0 driver for windows 7

Have a hp sleekbook 15-b142dx and down graded from windows 8 to windows 7. Can't find the right driver to make the two USB 3.0 ports work. The 2.0 USB port works just fine.
This question was solved.
View Solution.

Again you fixed it. Thanks so much!!!!!!!!!!

Similar Messages

Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
I downloaded the latest driver from the site...
NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
What to do?
error:

Use the windows XP driver. They normally work fine.

USB Serial Controller Driver for windows 7 64bit

USB Serial Controller Driver for hp 15-g049au windows 7 64bit
This question was solved.
View Solution.

Hi,
Install the Chipset drivers on the following link and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Usb 3.0 driver for windows 7 64 bit hp 23-b011 all in one

I have a hp 23-b011 that is a all in one computer. I downgraded the operating system to windows 7 64 bit because I prefer windows 7. Anyhow I need my usb 3.0 driver to work . I have tried the driver SP57875 it does not work. also have tried do the %temp% and copy it to the desktop and run it and it still does not work. If I am trying the wrong driver please let me know.
When I go to device manager and to the universal serial bus (usb) controller and right click properties and go to details, there is no information it only says universal serial bus (usb) controller. I have the AMD E2-1800 APU with Radeon(tm) HD Graphics 1.70 GHz processor.
Please let me know if I need a different driver thank u
This question was solved.
View Solution.

Hi:
Download and install both of these drivers and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

USB RS232/4 Driver for Windows CE

I'm using USB RS232/4 device well with my laptop. I wonder whether i can use the device directly connected with Windows CE system instead of Windows XP system.
I have LabView PDA Module and a single board computer operated by Windows CE.NET 4.2.
Is there any driver of the device for Windows CE system?

Windows CE is very different from Windows XP and currently the NI-Serial drivers is not supported on Windows CE. If you feel that this would be a valuable feature please file a product suggestion by going to Contact NI and click on the feedback link.
-Josh

Need USB 3.0 driver for Windows 7 running in Fusion

Greetings -
I have a MacBookpro Retina that is about 3 weeks old. So far it is running fairly well. I have installed Fusion5 and am running Windows7 Ultimate 64 bit. I have run into an issue however with my WD my passport 2tb USB3.0 drives. they are seen in OS X 10.8 and work fine. but when I try to attach to them with Windows 7 I get a message that the drivers are not installed and the drive is NOT seen in My computer.
I have narrowed it down to be a driver issue because when I attach the drive to a USB2.0 hub the drive is seen and works fine. I have to run Windows 7 as windows 8 performance is totally unacceptable and I discovered that some software I have that is windows only is not compatible with Windows8. I have tried a couple of intel drivers but they won't install so I am guessing I am trying to use the wrong ones. If they are in the support software for boot camp they are not redily recognizable since I have all that and there is nothing marked USB3 support.
I am headed to Afghanistan soon (contractor) so I really need to get this thing working properly. any and all help will be greatly appreciated.
Cheers, RDJ

Post on the Fusion forums: http://communities.vmware.com/community/vmtn/desktop/fusion

Usb 3.0 driver for windows 7

my usb 3.0 is not working
i need the driver

Hi:
Download and install both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

Using USB 3 devices on Mac computers FAQ

WINDOW 8.1 Cant find USB 3.0 Driver for H87 G43 Gaming

Cant find USB 3.0 Driver for Win8.1 64bit.

i don't see such drivers for Win8:
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3467
probably Win8 already include those drivers

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

Writing USB-Serial Converter Device Driver for Windows CE 6.0

Dear Developers,
I have a Silicon Labs chip Cp2108. Its a Quad USB to Serial converter. It supports all the operating systems except Win CE. So I have the source code of the driver for Linux 2.6 / Linux 3.0. I have experience in Device drivers development
in Linux.
Question is How will I start coding driver for Windows CE 6.0. Can anyone point me to a best starting point on this topic. All I need to do is make this chip work with WIN CE 6.0. Can anyone point me to a Sample driver source code It will be great.
Regards,
Winston

Dear Vinoth,
Thanks for the valuable reply.
I am confused a bit here. I need to make the external USB -UART bridge (CP2108) work on win CE 7.
the driver in Path \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER is using the built in USB controller
hardware and making it as a Serial port right ?
How do you go about making the external USB -UART bridge work as a COM port ?
I have a document from SIlicon Labs which gives info about Device descriptors and interface commands .
Regards,
Winston

HT201269 how to download apple usb driver for windows 7 32 bit

how to download apple usb driver for windows 7 32 bit

Try this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then install this:
http://support.apple.com/kb/dl1614
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Hello guys, just the other problem I'm facing with the 840 G2
I'm working in the MDT image for the HP 840 G2 and I would like to comment you one problem that I found with the USB 3.0 drivers. Based in your webpage, the last HP USB 3.0 official drivers are:
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3.0.1.41 A from 15 dic 2014
I have found that those drivers doesn't work properly; if you insert a Kingston DTSE9 (32GB) the content of the usb will not be accessible randomly. The event viewer will display:
The driver detected a controller error on \device\harddisk1\DR13
To solve this problem you have to obtain the last version of the drivers from the Intel webpage:
https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...
I have all the drivers properly installed and it seems that the computer is working fine, however I'm a little worry thinking if I should update all the driver to avoid possible problem like this one.
If you have found similar problems it would be nice to share it.
Thank you very much.

Hi,
Please use the following post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

USB ADSL Modem Driver for Huawei MT841 for Solaris Express

Hello Everyone
After initial hiccups of installing Solaris Express in a multiboot system and partition mania,i finally installed Solaris Express on my system.First i installed Developer Edition and upgraded it to Express thinking that Developer Edition doesnt have networking capabilities.
All said and done now i'm unable to access the internet.I'm using Broadband USB ADSL Modem from Huawei,type MT841 with four ethernet ports and one USB port.I dont have ethernet card so i use USB port to connect.
The thing is the modem cd doesnt have a driver for Solaris,but for linux it does.
Where can i find the driver for ADSL modem and how to install it,if i find it?
Is there any alternate way?Expecting a reply(because my last post about multiboot didnt)
Thanks in advance
C.S.Shreeram

Problem Solved!
Un-installing all USB modem device drivers, disconnecting all USB devices and removing all USB host controllers and hubs from the Vista device manager and then rebooting the notebook MADE NO DIFFERENCE.
However when I received the new Thomson SpeedTouch 330 USB ADSL modem drivers on CD-ROM from the manufacturer the modem installed immediately.
I can only assume that there is a problem with the download of Release 4.1 of the Windows Vista driver for the SpeedTouch 330 from this web-page:
http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471
... as the drivers on the CD-ROM from Thomson work - but their web download of the driver for the SpeedTouch does not.
The problem was with the driver for Windows Vista - the laptop and modem now work correctly - as they should have done at the first installation attempt!
Thanks for your help.

Hp pavillion 15-b142dx usb 3.0 driver for windows 7

Similar Messages

Maybe you are looking for