Hp pavillion a000 recovery disk error.. where to go from here?

HI.. .fIRST Thank you so much for being here today...
I have an HP pavillion a000 which was bought used.
About a week ago I got pre-windows msgs. on the 3rd time it has frozen at this point
Msg as follows...
bla bla.. but windows did not start successfully..
a recent hardwared or software change may have caused this..
It has counted down and started in normal mode..
then it has frozen.. and I have tried to start it it all modes..
This last attempt actually started windows and went back to this screen
I put in the compaq recovery disk...  I get red screen saying recovery disk error..
PLEASE Contact support
I have un plugged..re plugged and we go in circles...
I'm not sure where to go from here but any suggestions would be VERY appreciated as I do have some artwork I was doing stuck in computer now..
Do you think it's a software,, hardware or  even a virus thing??
Additional info... Hp pavillion a000   system no.174A-ABA.   hw bom 8121110   sw bom NA 40
serial no.  mxk34916m
operating system.. Windows xp... yes I tried recovery disks I have..  puter says...non compatible..
 I use firefox as browser via century link dsl..
I can pull the hard drive and I have a harness for accessing the hard drive directly via usb download if you think that's an option but not letting me into windows even has me doubtful that would work;;;
So as I mentioned.. ANY sugestions you can offer as what to try next would be MOST welcome!
I can replace the computer easy enough but I would love to be ables to rescue my art in progress at least!

Hello ValeryWildflowr,
If the computer was working fine before you might just want to try a system restore. This should correct the problem without affecting any of your files.
Here is a link for a system restore.
Let me know if this helps.

Similar Messages

  • New Server Installation, now client computers can't connect to services. Where to go from here?

    Hello.
    I recently had to setup a new Mac Mini Server (Mavericks). We had one previously but one of the raided hard drives failed. No backup.
    Our office of 6 Apple MacBook Pros used to connect to all file sharing and calendar services, easily.
    On the new Server installation, I added the same users with the same passwords etc. The client computers cannot access calendars, file sharing etc. On the clients, I have opened up System Preferences > Users & Groups > Login Options > Network Account Server and added the FQDN of the server, but I get an error ' Unable to add server. Connection failed to the directory server. (2100) '
    2 of the clients are on Mountain Lion. The rest are on the latest Mavericks.
    I'm a bit lost on where to go from here and would appreciate your help before I wipe everything and start from scratch.
    Thanks.

    Hi Strontium90
    Ha! There was a time machine backup, but we had a storm here which rendered it and the server useless. We are such a small team without an 'IT' guy, apart form me as I have a vague interest in all things Apple.
    What is your DNS name space?
    Do you need the name here?
    Do the servers and the client agree on this name?
    Not sure what you mean. The domain name works as when I type it into a web browser, I can see the 'Welcome to Server' page.
    Did you enable an Open Directory Master?
    Yes. Open Directory is running.
    Did you grant the users/group access to the service you are offering?
    Yes. All services are checked for each user.
    Make sure the user/group is permitted to access your enabled services.
    All allowed, too.
    Oh, and implement a backup strategy
    Will do, once I sort out this problem. Time Machine and off-site, I think.

  • My mac has a virus yes I'm 100% sure it is one i get al kinds of pop ups only in safari though please guide me on how to reset it or where to go from here in detail new to macs

    My mac has a virus yes I'm 100% sure it is one i get all kinds of pop ups only in safari though please guide me on how to reset it or where to go from here in detail im new to macs

    Please post a screenshot that shows what you mean. Be careful not to include any private information.
    Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

  • Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

    hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

    If you don't have a backup, read this:
    https://discussions.apple.com/docs/DOC-1689

  • HT1212 daughter changed passcode then forgot it. tried to restore iphone to fix but was prompted to turn off find my iphone. cant do that since passcode was forgot. not sure where to go from here.

    Daughter changed her passcode then forgot the passcode. Tried to restore iphone but could not since "find my iphone" was enabled. Cant shut it off because i cant log into device. Stuck, need help. Not sure where to go from here.

    From http://support.apple.com/kb/ht1212:
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device.
    The link for Remote Wipe is http://support.apple.com/kb/PH2701

  • HT204406 Hi, my iTunes Match has been stuck on 5490 of 5518 songs checked for the last two days. Any advise on where to go from here?

    Hi, my iTunes Match has been stuck on "5490 of 5518 songs checked for the last two days." Have tried stopping and restarting it a few times but it always gets stuck in the same place. Any advise on where to go from here?

    ttt

  • Hp Pavillion Dv7 Recovery Disks

    I really hope someone can help me out.
    I have an old Hp Pavillion Dv7-1262 i bought in 2008. I had to restore it twice before and ordered the recovery disks from HP around 2010. The recovery disks come with Windows Vista Home Premium. They have worked perfectly before no matter the problem even when i bought a new hard drive.
    Recently my laptop for some unknown reason stopped booting any software/operating system. Computer turns on but does not load Windows.
    When i put the disks in Recovery Manager appears (does not give any other options other than loading the disk) but it stops almost half way through. The error message        1005         and does not let me put in the second disk out of the three.
    Anyone know what it could be? Could it be the hard drive? or do the Recovery Disks need to be bought again? (there is no damage to them, have they run their expiration?)
    If its the Hard Drive what kind should i get?
    Thank you

    Hi,
    Please call HP technical support: 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
      http://www.hp.com/cgi-bin/hpsupport/index.pl
    HP may charge you a small amount of money for P&H.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP G62-357CA Recovery Disk Error code OxeOef000e

    I am trying to recover my HP notebook G62-357 and when I am on the second disk it is giving me the following error. Can anybody please help.
    "Recovery Manager could not restore your computer using the factory image. Please contact HP Support.
    Error code : OxeOef000"
    I am using Windwos 7 operting system, and these recovery disk are the original ones came with the system, were never opened or used, so I do not think any issue with the CDs itself.
    Just so you know I am out of the warranty, so can't call HP. Any help is appreciated.
    Thanks
    This question was solved.
    View Solution.

    Anytime!

  • HP Pavillion 17 Recovery disk

    Hello. I have notebook HP Pavillion 17 with OS Win 8. When winlocker virus lock my notebook  - i download ISO Win8.1 from HP site and install them. But windows not have license key - 90 days trial. I dont have recovery disks and F11 wan't work. How i can get recovery disk for my notebook (from Russia)  or license key for windows?
    Thanks for any advice.

    Hello @dvserg,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are looking to recover your computer's operating system, and I would be happy to assist you in this matter!
    To acquire the necessary recovery discs for your notebook, I recommend following the steps in this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

    I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk.  I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"  This is from the "out of the box" setting, which is recommended.  I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks? 
    Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
    ~Drew

    Satellite L655-S5096
    Downloads here.
    the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
    My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
    Otherwise, order new discs from Toshiba.
    -Jerry

  • I have tried many times to reset my apple pw, it says email sent but I am not receiving it.  Any ideas where to go from here?

    I have tried many times to reset my apple pw, it says email sent but I don't receive it.
    Where do I go from here.

    Hey Sharon,
    ive been trying to reset one of our employees' acccounts since last thursday,
    after several failed attempts.  My case was escalated.
    I've since been told (today) directly by itunes/account/apple id - support, that they can't reset our password,
    due to a system update.

  • Unable to make recovery disk-Error code:02012​3

    I just recently bought Satellite P755-S5265  and I am having trouble creating recovery discs. 
    When using the Recovery Media Creator program, I can create Discs 1 to 3, but am having trouble on disc 4.
    About halfway during the downloading sequence this error pops up:
    Failure to open file 
    D:\DATA.INI
    (Error Code:020123-F1-0000000) 
    I have gone through several DVD-R discs each having the same error.
    I've also tried using the Hard Disk Recovery utility to restore the computer to manufactory settings, but the same error pops up again. 
    Could someone please help me out?
    I appreciate an help I can get.
    Thank you in advance  

    If you're getting the error both when creating recovery media and when recovering the computer using the recovery partition, it sounds like there's a problem with the data on the recovery partition itself.
    I'd contact support at (800) 457-7777.
    - Peter

  • Recovery disk error message

    Hi,
    I am trying to create a recovery back up dvd of the software on my new a666d-st2g01 laptop. When I attempt to do this I get an error message telling me to "insert blank media". I am trying to use memorex DVD-rs. Does anyone know what I can do about this?
    Thanks

    a666d-st2g01
    Maybe this one?
    Satellite A660D-ST2G01
    If the DVD burner works for ordinary data, then there may be something wrong with the program. If necessary, you can get them from Toshiba.
        Order Toshiba Recovery Media
    -Jerry

  • Pavilion dv7-5003tx replace hdd recovery disks error code OxeOefoooe please help.

    have tried both recoveries hangs at 45% and goes no where

    Hi,
    One factor that can cause this error is replacing the original HDD with a drive of smaller capacity - if this is the case, recovery discs almost always fail to work correctly, however there isAssuming this is an alternative option you could try.
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    An example of a COA Label can be seen Here.
    You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers and software you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Unable to make recovery disk-Error code:020123-f10000000

    Hi guys 
    please help if can?, i purchased the recovery disc for my tosibia qosmio dx730 -10p loaded new windows on all perfect and tried to make a copy of the back up media so i have extra copy incase other  gets damaged its saying same thing when purchased this pc from new ,on first  blank dvd r disc it gets half way and saids ,
    Failed  to open file
    E;\boot\BCD
    ERROR CODE 020123-F10000000
    E drive is my dvd rw drive 
    i have intalled the new discs they sent me and still cant make a media back up .
    Deborah 
    Solved!
    Go to Solution.

    Hi ! Iuse memorex DVD-R. What I would do is buy a usb and create your recovery on it. That is if your machine will boot to a USB. I have a 16GB USB with my recovery on it. It would be a lot easier to use it than all those discs You can check boot sequence to see if your machine will boot from USB
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Maybe you are looking for

  • Preview & ICC Profiles

    Hello all, I've been digging around here and elsewhere for a huge chunk of my day, and I'm having trouble concretely answering a question: Does Preview respect embedded color profile information? If so, why can I not get Preview to display a Photosho

  • JDOM and text embedded tags

    Hi all! I've just been using JDOM for some XML parsing right now and it works really fine. But I have one problem I can't find a solution (but I think it should be possible and quite simple). Given the following XML for example: <document>   <item>  

  • AR Invoice - Stocks

    Dear Experts, I have Item ABC bought on 1st of Jan 2010 (qty =10). Then i bought more on 1st of Feb 2010 (Qty = 5). I have created a stock ageing report using Query generator, and i can view the current ageing 1-30 days = Qty 5 and 30-60days = Qty10

  • How to exclude import of RAW?

    How is it possible to not import RAW images if you're importing from a device/card that has images from a supported RAW camera?

  • CS2 question  Filter- Distort- Lens Correction

    Comrades... When using the lens correction pane (Filter-> Distort-> Lens Correction) in CS2 I have never been able to use the hand tool to move a scaled (or not) image within the preview window. It just doesn't function. eg., when correcting for vert