HP Pavillion dv3 4103tx Blue screen atikmpag.sys

i have to error when after i reformat my windows 7 64bit and install my ATI catalyts Driver .everytime i re install it goes like this. how can i resolved this issue?
im using HP Pavillion Dv3 4103-tx

Hey oliver08,
I'm sorry you're running into this blue screen. Thanks for providing the picture and all of that information. What version of the driver are you trying to install? Are you using the same downloaded install file or are you downloading each time? It could be if you're using the same downloaded installation file that it is not complete or was corrupted somehow.
1. First, Uninstall the current graphics driver through Device Manager > Radeon HD Graphics > Properties > Driver tab > Uninstall. DO NOT RESTART at this point because Windows will automatically detect the missing driver and reinstall it. I would like you to try the drivers below, rather than Windows reinstalling the same driver that's already on the computer.
2. Your model's Driver Page shows two versions available, so I suggest trying both.
AMD HD Graphics Driver version 8.771.1.4000 -- try this one first because it is the most recent.
AMD HD Graphics Driver version 8.741.1.1
3. Download and install 8.771.1.4000. Use the Express installation if it asks you. Restart only if it prompts you to. Then test to see if you're still getting a blue screen. If you are still getting the blue screen, uninstall the same way you did at first and download 8.741.1.1. Install it, test and let me know if you're still getting the blue screen.

Similar Messages

Blue Screen (atikmpag.sys) on MSI R9 280

Hello, i have one Video Card MSI R9 280 but with drivers problems resulting in failure to enter Windows by a Blue Screen.
All the components are new, i build the P.C. a few days ago so in the first Windows installing all work fine, i installed the video drivers with the CD of the box. Reboot the pc when installed and all fine. The trouble came after install a couple of games and played it, one freeze and the pc reboot. Since then when i try to start windows and crash it with this:
Only in Safe Mode i can start Windows, but i disable the AMD drivers and right now i am with the VGA drivers from the motherboard.
I dont know if is a Software issue (I installed two Windows 7 - Ultimate & Proffesional) or Hardware (because in the first use all work fine even the drivers)
Please Help, i dont know what to do

This is my pc:
Cpu: AMD fx8320
Motherboard: gigabyte 990fxa ud3
RAM: corsair vengeance 8gb 1866 MHz
Cooler: cooler master seidon 120 v
Psu: corsair tx750
Hdd: western digital green 1 tb
Video card: msi r9 280
I already installed the last versions of the AMD drivers and nothing. That file (atikmpag) is already in the drivers of windows, i dont know why is making the blue screen. I have the motherboard BIOS updated. Not even in safe mode the pc recongnize the video card :|
By the way, i have windows with service pack 1 installed.
The thing is that in the very first configuration and windows installation, al work fine, the problem was i played a game and the screen freezes and reboot, since then i have the blue screen :(
Another problem is that i live outside EEUU and i cant return it, i cant imagine if i lose the 250$ of the vídeo card, its a lot of money for me.

HP Pavilion DV6; Black Screen & Atikmpag.sys BSOD with external Monitor

Hello Guys.
I have HP Pavilion DV6 Core i7 with ATI Mobility Radeon HD 5650 Graphics Card. Two weeks ago, I started getting continous Atikmpag,sys BSODs. The operating system also started giving me warnings about the hardrive. After a few days, the BSODs got more frequent. Then one day, I was doing normal stuff on my PC and the Display Driver crashed. Instead of recovering, the PC froze. I forced restart my PC but it got worse. The display of my laptop went black. I connected the laptop to external monitor which detected the display. When I tried to load the windows, it started giving me the Atikmpag.sys BSOD on the start up. Now the operating system works fine in the Safe Mode but with nothing on the laptop's screen. The soultions I have tried so far are.
-Reinstalled the windows thrice
-Removed the drivers and installed the updated ones a bunch of times.
-Rolled back the bios to an earlier version
-Removed the hardrive and tried to load it from an operating system installed on external flash drive
-Tried loading the PC with linux on external flash drive
-Opened the laptop and cleaned it thoroughly
-Removed all the components and plugged them one by one.
-Removed the old Atikmpag.sys in system32 folder and expanded it with the latest ones.
-Installed every thing fresh from HP website
None of these tricks have given me any luck yet. The only way, I could use the operating system in normal mode, is to delete the atikmpag.sys file in safe mode and then log on back in normal mode. I also analysed the minidump file through window debugger and it says that atikmpag.sys is causing this crash with the TDR message. I did all these with an external monitor as the display of the laptop is black since that day.
Below are the detailed specs of my laptop.
OS Name: Microsoft Windows 7 (64 bit) Home Premium
Version: 6.1.7601
System Model: HP Pavilion Dv6 Notebook PC
Processor: Intel Core i7 Q 721 @ 1.60 GHz
Bios Version/Date: Hewlett- Packard F.29, 11/7/2011
Installed Physical Memory (RAM): 6GB
Graphics Card: ATI Mobility Radeon HD 5650 1 GB
I have tried almost every solution available on these forums but still have not gotten any where. I am wondering how could the display, graphics card and hard drive stop working at the same time .
I would really appreciate if someone colud help me through this problem.
Thank you
P.S. Kindly ignore my English mistakes as it is not my first language.

Hi Goloono,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
First I would like to reassure you your English was great, I had no problems understanding you.
I grasp that you are getting a black screen with the error message " Atikmpag.sys".
Here is a link to Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot.
Have you run The HP Support Assistant to help with updates and resolving issues.
Here is a link to a Microsoft Community Page with this exact issue. There are some suggestions that may help.
Blue Screen error with atikmpag.sys in Windows 7 .
Here is a link to the HP software and driver page. You will need to input your exact model of DV6 you have and follow the prompts. This page will have the recommended drivers and it will list bios updates. if there are any applicable ones.
HP Drivers & Downloads.
How Do I Find My Model Number or Product Number?
At one point you state you had a hard drive error, to rule that out I would run a diagnostics. SMART Media Test Error Appears when Notebook is Started
Please let me know if this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Live CAM Video IM Pro - Blue Screen (KS.SYS)

Just purchased Live CAM Video IM Pro first creative product.
My System: WinXP SP2, GB, Over 8 GB system space free.
Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
Result: The cam is useless.
Any help is greatly appreciated.

no one can help me? plz thx

MDT 2012 Blue Screen AHCIX64s.sys

Hello All,
I am having a problem after updating my deployment share image for MDT 2012. I am pretty sure the deployment share had not been updated in about 4-5 months and we had recently received some new hardware and added new drivers to MDT. I added the
drivers, and 3 of the 4 models booted just fine, the 4th claimed it didn't have drivers.
SO I went through and updated the boot image and added the new image to WDS. Now when I attempt to netboot any machine, I get a BLUE SCREEN OF DEATH referencing ahcix64s.sys. I went through every driver I could find for the last 6-12 months that
referenced ahci and unchecked "enable this driver". I then went through and updated the deployment share and added the new image to WDS. I am still getting the BLUE SCREEN OF DEATH.
Any suggestions on how to fix this? DO I need to delete all the drivers, as opposed to unchecking the "enable this driver"?
Joe

Are you getting the BugCheck on all machines or just one machine? Specifically, what is the error?
I have encountered problems with the Intel ACHI driver, since the *.inf file is identical between x86 and x64 it's difficult to know which driver package is for which OS. Hopefully MDT is doing the right thing here, and filtering out the correct version. How
many achi driver versions are being injected into the WinPE image (check the DISM.log)?
-k
Keith Garner - keithga.wordpress.com

Blue screen atikmpag.sys

Hello I have a problem while playing a blue screen showing a picture of the screen
my hp
Pavilion dv6-6170se
P PAVILION DV6-6170SE INTEL Core i7-2670 (2.2GHz with Turbo Boost upto 3.2GHz)
15.6” HD wide Screen Bright View LED
8GB DDR 3
500GB HDD
ATI Mobility Radeon 2.0 GB (DDR5)
DVD Super Multi 8x DVD-RW Dual Layer

A.
Update the Bios.
How to update the Bios?
Download the latest Bios update from here.
Plug the AC adapter to the netbook.
Disconnect from the Internet. Close all currently running programs. Disable anti-virus and firewall.
Double-click the Bios update exe file. It may take some time, so it is important to remain patient, do not interrupt the process. Allow the notebook to restart after applying the updated BIOS.
While this update is running:
do not switch off your laptop,
do not unplug the AC adapter,
do not try to run any software or do anything on it.
Note:
The Bios update process is always risky. You will do this at your own risk.
B.
Dowload and install the latest Intel chipset driver from here.
Restart the system.
C.
Update the graphics driver.
Uninstall the ATI/AMD graphic driver first. Check the link below:
How to uninstall ATI / AMD graphic card drivers from a Microsoft Windows 7.
Download and install the latest HP driver for swichable graphic from here.
Restart the system.
D.
Check the links below to find out how to get the best performance on the switchable graphic:
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

My Pavillion dv3 4103Tx found out that my board is something wrong

HP support ,
Can i ask if my HP Pavillion dv3 can replace my board if it is more that a year?
if im planning to change the Motherboard would how much it cost?
thank you

PLEASE ANY HP SUPPORT ASSISTANCE who can answer my porblem.

Igdkmd64.sys blue screen

How exactly do I trouble shoot what is causing this random blue screen igdkmd64.sys? Thanks!

Hi,
Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US please see Microsoft Worldwide Home for regional support phone numbers.
http://www.microsoft.com/worldwide/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Zoom Player blue screens x-fi dri

Hello everyone,
I'm the proud-new owner of an x-fi card. It replaced an aging TB Santa Cruz. However,
ZP 4.5 or 5beta blue screens p7xfilt.sys. I'm using a fresh, clean install of xp pro. The x-fi drivers are installed properly. I have no issues playing files with Power DVD, WMP9 or VideoLan. So the question is what does ZP do to this driver that these other video apps don't? And how do I fix it's
Thanks for your suggestions.
Graycat-zero

I have problems with various different exe files ex ffdshow codec installer exe causes blue screen...

Blue screen hard dump to disc when printer is connected

hpofficejet pro 8600 plus, windows7 64 bit, new printer, laptop hp pavillion dv7, error/ blue screen, hard dump, save to disc ,restart to recover, multiple times now, unplugged printer to avoid. Drivers and software reinstalled. Message says update bios maybe?

Please take a look at this document USB 3.0 Blue Screen Document. Verify your USB 3.0 chipset is the same as described in the document and if it is the same download the fix from Intel.
Best regards,
I am an HP employee

Atikmpag.sys blue screen

Hello there,so i got this atikmpag.sys blue screen appers in my laptop,i though i could fix it with a format ao i tried than,now not only it didnt got fixed but i cant run in safe mode anymore because windows have so install,any way to get rid of the blue screen?my laptop is G62-b90EV,
Thanks in advance
This question was solved.
View Solution.

@Telis13
Ok since you have managed to get into safe mode. You can try removing the the video driver and reinstalling the driver from the HP Support website.
HP G62-b90EV Notebook PC Drivers
Be sure to select the correct operating system for your notebook and download the updated driver. I am assuming that you will do this on another computer and transfer the driver to your computer using a flash drive or some other usb removable media.
After trying that then reboot the computer and see if the problem remains. IF it does then try the things from my previous post. If the system restore does not work for you, then I would recommend backing up the contents of your hard drive to another driver and then perform a a system recovery.
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)

Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag

Anyone seeing a nwdelmdm.sys blue screen error connecting to a jetpack?

Anyone seeing a nwdelmdm.sys blue screen when connecting to a jetpack?

Jetpacks do not require any software unless you are referring to a USB connection. If so then your Jetpack USB drivers have become corrupted and should be reinstalled. Id assume NW in nwdelmdm.sys is referring to Novatel Wireless.
If you have any other USB modem connection software or drivers you might want to clean them up too.

Blue Screen Error - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys) - Satellite Laptop

Hi, I have been getting blue screen errors the past couple days.
The error says: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys)
Attached is the dump file. Let me know if you are able to open it. Any help would be appreciated!
https://onedrive.live.com/redir?resid=B6AB1143124F198F%21442

Which Satellite? There is a label on the bottom.
Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Caused By Driver : fvevol.sys         <--- BitLocker Drive Encryption Driver
If you saw Netwbw02.sys mentioned, give us some more .dmp files.
==================================================
Dump File         : 020215-31750-01.dmp
Crash Time        : 2/2/2015 2:14:04 PM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code    : 0x000000d1
Parameter 1       : ffffd001`1c2c1000
Parameter 2       : 00000000`00000002
Parameter 3       : 00000000`00000001
Parameter 4       : fffff801`9eff6874
Caused By Driver : fvevol.sys
Caused By Address : fvevol.sys+15f6874
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\020215-31750-01.dmp
Processors Count : 4
Major Version     : 15
Minor Version     : 9600
==================================================
-Jerry

HP Pavillion dv3 4103tx Blue screen atikmpag.sys

Similar Messages

Maybe you are looking for