HP Pavillion g4 windows 7 64 bit startuP error "Status: 0xc000000f"

Hello Team,
I have HP Pavillion g4 windows 7 64 bit laptop.
I had installed android tool kit and restarted my laptop.After that my laptop is not booting UP.
I am getting below error "Status: 0xc000000f".
Windows Failed to start. A recent hardware or software change might be the cause. To fix the problem:
Insert your Windows installation disc and restart your computer.
Choose your language settings, and then click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I dont want to lose the data.
I dont have windows 7 installation CD.
How do I resolve this.
Your help is much appreciated.
Thanks
Shishir
This question was solved.
View Solution.

Hi,
Try the following.
If you don't already have one, use another PC to create a Windows 7 Rescue CD.  Download the ISO file from the link below - this is not an installation disc, but will allow you to access the Recovery environment.
Windows 7 64bit
You should use an application such as ImgBurn ( Note: you may want to de-select the additional software options during the installation of ImgBurn ) to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. 
When created, tap away at the esc key as soon as you start the notebook launch the Start-up Menu and then insert the Rescue CD.  Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter.  You may also get a prompt to 'Press any key to continue' - do this if asked.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
If the above fails to help, make a note of any error messages you may get during the procedure and include them with your next post.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • CS6 in Windows 8 Startup Error

    Hello,
    I just bought a new laptop, a Sony Intel i7 with Windows 8. I just bought the creative cloud and opened up Premiere pro. I got this startup error, "Adobe Premiere pro could not find any capable video play modules. Please update your video display drivers and start again.
    I've seen forums discussing this issue, but nothing has worked. I tried it in admin and nothing. I went to my graphics properties and changed the power settings to maximim performance, nothing.
    Does it have to do with it being on windows 8?
    Thanks
    Julie

    So, you did everything it says here? http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    What is the exact brand/model graphics adapter/chip and the exact device driver version?
    If nVidia, find the driver driver version
    Right click in any open area of the Windows desktop
    Select NVIDIA Control Panel from the popup window
    Select SYSTEM INFORMATION at the lower left corner
    Driver version should be the 1st line in Details
    >graphics properties and changed the power settings to maximim performance
    Does that mean you have dual video adapters?
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • HP Laptop Windows Reinstallation, Startup Error

    I recently tried starting up my HP Laptop. It's about a year old. It was working all times previous to this use, but hasn't since. It says that due to a recent update that I need to re-insert a Windows installation disc because my NLS data is missing. I did not recieve such a disc. How can I get this disc and get this error taken care of? I don't want to be redirected to a bunch of different dead ends, as I have been in the past. I just would like to fix and get past this issue on my computer. Does anyone know what is wrong and what I can do to fix it? I need to get the reinstallation disc for Windows, I think it is Windows 7. IDEAS?

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment.
    Most consumer computers, desktop and laptop alike, haven't come with operating system or recovery/restore discs since around 2003.
    When you first setup your computer you should have created a set of HP Recovery Discs and possibly a Windows Repair CD. If you didn't created these discs, you may be able to order a set from HP or a third party vendor. Alternatively, you can download and create a Windows 7 installation disc or USB Flash drive and attempt to repair your computer.  Please see "How to Install Windows 7 Without the Disc" for instructions on how to download Windows 7 and create the installation media.
    Once you have this disc you can use it to repair your current Windows installation. Please see "Starting your computer from a Windows 7 installation disc or USB flash drive" and "Startup Repair: frequently asked questions" for more information about repair your computer.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Foundation 6.0/ Windows 2003 Startup Error

    I am receving the same error that I've seen reported by others on this message board (openkernelsearchimpl). Unfortunately, changing the Default Auth Pool to run with the Local System Account did not fix the problem for me. I've also included diagnostic.bat. Has anyone seen this/know how to resolve it?
    Thanks!
    Amy
    Server Error in '/portal' Application. <HR noShadeIZE=1>
    Configuration ErrorDescription: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: File or assembly name openkernelsearchimpl, or one of its dependencies, was not found.Source Error:
    Line 256:                <add assembly="System.EnterpriseServices, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
    Line 257:                <add assembly="System.Web.Mobile, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
    Line 258:                <add assembly="*"/>
    Line 259:            </assemblies>
    Line 260:
    Source File: c:\windows\microsoft.net\framework\v1.1.4322\Config\machine.config[b] Line: 258 Assembly Load Trace:The following information can be helpful to determine why the assembly 'openkernelsearchimpl' could not be loaded.
    === Pre-bind state information ===
    LOG: DisplayName = openkernelsearchimpl
    (Partial)
    LOG: Appbase = file:///D:/Program Files/plumtree/ptportal/6.0/webapp/portal/web
    LOG: Initial PrivatePath = bin
    Calling assembly : (Unknown).
    ===
    LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
    LOG: Post-policy reference: openkernelsearchimpl
    LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portal/25f1a5f1/e4f6af3a/openkernelsearchimpl.DLL.
    LOG: Attempting download of new URL file:///C:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/portal/25f1a5f1/e4f6af3a/openkernelsearchimpl/openkernelsearchimpl.DLL.
    LOG: Attempting download of new URL file:///D:/Program Files/plumtree/ptportal/6.0/webapp/portal/web/bin/openkernelsearchimpl.DLL.
    LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
    LOG: Post-policy reference: openkernelsearchimpl, Version=3.6.0.0, Culture
    Diagnostic.bat
    D:\PROGRA~1\plumtree\ptportal\6.0\bin>diagnostic.bat administrator PPCadminPORTAL_HOME=D:\Progra~1\plumtree\ptportal\6.0Expected PORTAL_HOME=D:\PROGRA~1\plumtree\ptportal\6.0OpenLog: verbosity level = 2 Diagnostic system initialization OK. Portal Startup begins: 15 total tasks.OpenLog: Registered application name: ConfigInitializationOpenLog: Registered application name: portal.sles2.administrator (local machineonly) FATAL: Task #1 (InitPortalObjects) step 4 failed to complete. TDE: Portal or Search native libraries are not on your PATH. Normally, theinstaller sets up your PATH correctly. Please verify all native libraries have been installed and that your system PATH correctly points to them. The installersets up the following environment variables, and then uses them on your PATH: PORTALLIB_PATH; PTHREADS_PATH; OUTSIDEIN_PATH; INXIGHT_PATH; ICU_PATH. Please manually tune and verify each entry on your PATH and run again.
    PortalObjectsFactory Initialization Failure (.NET) RECOMMENDATION: Review the exception listed below for more details. Since OpenKernel initialized correctly, this usually means that the portal database is not scripted or properly configured, or there is an installation problem related to .NET assemblies. This may mean the search libraries are not on your path. Try running ptverify.Task 'InitPortalObjects' Failed on Startup Task #1 (InitPortalObjects) Step #4--------------------------------------------------------------------------------
    error: PortalObjectsFactory Initialization Failure (.NET)platform: Windows (.NET)failure: FATAL: PortalObjectsFactory Initialization Failure (.NET)recommendation: RECOMMENDATION: Review the exception listed below for more details. Since OpenKernel initialized correctly, this usually means that the portal database is not scripted or properly configured, or there is an installation problem related to .NET assemblies. This may mean the search libraries are not on your path. Try running ptverify.exception: XPFileNotFoundException TDE: Portal or Search native libraries are not on your PATH. Normally, the installer sets up your PATH correctly. Please verify all native libraries have been installed and that your system PATH correctly points to them. The installer sets up the following environment variables, and then uses them on your PATH: PORTALLIB_PATH; PTHREADS_PATH; OUTSIDEIN_PATH; INXIGHT_PATH; ICU_PATH. Please manually tune and verify each entry on your PATH and run again.
    message: File or assembly name openkernelsearchimpl, or one of its dependencies, was not found.secondary exception: at com.plumtree.uiinfrastructure.application.startup.InitPortalObjects.InitPortalObjectsStep() in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\application\startup\InitPortalObjects.cs:line 312--------------------------------------------------------------------------------
    FAILED TO INITIALIZE SYSTEM. YOU CANNOT PROGRESS BEYOND THIS POINT. ======= Diagnostic Run Complete ======= Startup completion percentage: 10% (5 steps out of 50 complete) Diagnostic Test execution complete.Press <enter> key to exit.

    I was running Oracle on the same box as the portal (developer machine for testing). My solution (after talking to MSDN support) was to give the network service read and execute permission on the D:\Oracle\Ora10\bin folder and that resolved the issue.
    I couldn't upload my documennt so here is the text without the images. Email me at [email protected] the word document I put together.
    IIS_wpg (IIS Worker Process Group):This group contains the anonymous user, network service account and several other machine accounts. You can put this account on any folders that contain .dll's that your application references to grant acces to these .dlls to the application. Just the default of Read / Execute are needed.
    ASPNet Account: This user is not used in IIS 6.0. You can ignore it for the most part. The only time it comes into play is if you run IIS 6 in isolation mode (IIS 5.0). If run in isolation mode then the ASPNet user acts like it did in IIS 5.0 and Application Pools in IIS 6.0 are ignored.
    IIS 6.0 used the w3wp.exeworker process
    IIS 5.0 or IIS 6.0 running in isolation mode uses the aspnet_wp.exe
    Application Pool Identity Tab:
    Network Service
    a. Most restrictive
    b. Run as the NT AUTHORITY\NETWORK SERVICE user
    Local Service
    a. Rarely ever used in practice.
    b. Run as NT AUTHORITY\SERVICE
    Local System
    a. Least Restrictive. SYSTEM is slapped on pretty much every folder in the OS with at least Read / Execute rights.
    b. Runs as NT AUTHORITY\SYSTEM
    NOTE: These users don't appear with the NT AUTHORITY\when looking at Properties of files and folders. LOCAL SERVICE = SERVICE = NT AUTHORITY\SERVICE
    Troubleshooting Errors
    1. Use FileMon from www.sysinternals.com
    2. In our example below we are receiving errors because the NETWORK SERVICE account does not have access to the Oracle files listed
    3. This was causing this error when accessing http://localhost/portal/server.pt:
    4. The error that .net was throwing on the application page didn't reflect the real error that was occurring. By using FileMon, saving the logfile to text and then searching with notepad for Access Denied"we were able to pinpoint the permissions issue. Can also open the FileMon log file you saved into Excel for some nicer sorting features.
    5. D:\oracle\ora10\BINadded NETWORK SERVICE and accept default rights. Could have put IIS_WGP group on instead of NETWORK SERVICE but since DefaultAppPool is running as NETWORK SERVICE the other groups didn't need access. This fixed the error message above!!!!
    6.

  • Satellite C660-1FS - Windows 7 startup error

    Hello to everybody. I have this laptop with Windows 7 Home Premium (no installation disk given by purchase). Since this morning I experience the following message/problem
    Windows Error Recovery
    Windows failed to start. A recent hardware or software change might be the cause.If windows files have been damaged or configured incorrectly, startup repair can help diagnose and fix the problem. If power was interrupted during startup, chose start windows normally
    Launch Startup repair (recommended)
    Start Windows Normally
    Both options do not work. Furthermore, Windows cannot enter in Safe Mode. I live in Belgium and I don't know what to do. Shall I try with a friend's windows 7 installation disk (from Dell notebook) or I should contact Toshiba directly?
    Thanks in advance

    Check if you can recover the notebook using HDD recovery procedure as described here:
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
    If this will not work, you will have to install the OS using recover disk.
    I assume you have not created the recover disk in the past. Right?
    In such case you need to order the recover disk from here:
    http://backupmedia.toshiba.eu/landing.aspx

  • Windows 7 startup error after uninstall of Photosmart 6510

    After uninstalling Photosmart 6510 and software, get error message: "There was a problem starting C:\Program Files\HP\HP Photosmart 6510 series\bin\HPStatusBL.dll" when Windows 7 starts up.

    Sounds like the software was not completely removed (or atleast Windows still is looking for something). Microsoft make a tool that should be able to help, it is called FixIt. Click the link below for more details:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Windows 7 startup error message

    I get a popup window of DSD_2468 (not responding) the 4 numbers seem to change each time I boot the system.  Does anyone know what this is and how do I fix this.
    Jimmy Ray Clemons

    DSD stand for Dell System Detect which means a Dell utility is giving you the error message and you need to contact Dell Technical Support for assistance resolving this error message.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Windows shutdown startup errors

    When I shutdown Windows on my new Yoga 2 11 and later turn on the laptop i get a bunch of dos errors and wont load into Windows.  I have to power off and back on and then it loads into windows.
    I have been shutting down Windows using the shutdown button (like on a desktop)
    I am not use to the solid state drive.  Am i doing something wrong?
    thanks
    Matt

    hi matthew737,
    Welcome to Lenovo Community Forums!
    Are you shutting down the System like this?
    1. Pull up the Chams Bar on the right hand side.
    2. Press the Power Icon
    3. Click on shutdown
    If NO -  Shut down should be on this method, Try it and see if that fixes it.
    If YES -  Try Disabling the fast start up
    Hope this helps
    Solid  Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • NI-Visa Runtime 5.4.0 Fails with error status 1603.

    I'm trying to install the NI-Visa runtime 5.4.0 in a Windows 7 embeded PC after some investigation I can see in the windows log the error status after the installation it's 1603.
    What it's the meaning of this error? did anyone succeed in install the foftware in a similar platform?
    Thanks and best regards.

    I ran the verbose log for the NI install file, in this case:
    ...\NI-VISA Runtime\setup.exe /acceptlicenses "yes" /log c:\InstallVISA.log    , looking for "Return Value 3", like indicated here, show this:
    DIFXAPP: ENTER: ProcessDriverPackages()
    DIFXAPP: ERROR -The operating system you are running on isnot supported.OnlyWindows2000,Windows XP,WindowsServer2003andWindows codenamed Longhorn are supported.
    CustomActionMsiProcessDrivers returned actual error code 1603(note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s)(D0:E0)[12:31:25:671]:Machine policy value 'DisableRollback'is 0
    MSI (s)(D0:E0)[12:31:25:671]:Note:1:14022: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
    Action ended 12:31:25:MsiProcessDrivers.Return value 3.
    Note that this installer works on another WES7 machine...
     

  • Startup error message while starting up Windows after installing NI Circuit Design Suite 10

    Hi.
    I recentely acquired NI Circuit Design Suite Student Edition v10.
    After installing it on my computer I began receiving the following error message everytime I booted up Windows.
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    I checked the Windows logs and found other error messages when the system booted:
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date:  12-01-2008
    Time:  13:17:54
    User:  N/A
    Computer: THINKPADT30
    Description:
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 6e 69 64   ure  nid
    0018: 6d 73 72 76 2e 65 78 65   msrv.exe
    0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
    0028: 20 69 6e 20 75 6e 6b 6e    in unkn
    0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
    0038: 30 2e 30 20 61 74 20 6f   0.0 at o
    0040: 66 66 73 65 74 20 30 30   ffset 00
    0048: 37 66 63 36 36 66         7fc66f 
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1004
    Date:  12-01-2008
    Time:  13:18:51
    User:  N/A
    Computer: THINKPADT30
    Description:
    Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74   Applicat
    0008: 69 6f 6e 20 46 61 69 6c   ion Fail
    0010: 75 72 65 20 20 6e 69 64   ure  nid
    0018: 6d 73 72 76 2e 65 78 65   msrv.exe
    0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
    0028: 20 69 6e 20 75 6e 6b 6e    in unkn
    0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
    0038: 30 2e 30 20 61 74 20 6f   0.0 at o
    0040: 66 66 73 65 74 20 30 30   ffset 00
    0048: 37 66 63 36 36 66         7fc66f 
    Event Type: Error
    Event Source: Application Error
    Event Category: None
    Event ID: 1001
    Date:  12-01-2008
    Time:  13:21:33
    User:  N/A
    Computer: THINKPADT30
    Description:
    Fault bucket 619997672.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 42 75 63 6b 65 74 3a 20   Bucket:
    0008: 36 31 39 39 39 37 36 37   61999767
    0010: 32 0d 0a                  2..    
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7034
    Date:  12-01-2008
    Time:  13:18:12
    User:  N/A
    Computer: THINKPADT30
    Description:
    The National Instruments Domain Service service terminated unexpectedly.  It has done this 1 time(s).
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
    After the update the problem remains exactly the same.
    To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
    Lookout Citadel Driver
    National Instruments Time Sincronization
    I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
    Can anyone give me some hints on this matter?
    Thank you in advance.

    Good morning.
    I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
    The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
    1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
    2. Rebooted the computer.
    3. Opened the services control in Administrative Tools.
    4. Selected the first service "Citadel..." and pressed the "Start" button.
    5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
    6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
    7. Changed the startup type of the services to the values I had written down before.
    8. Rebooted the computer and everything worked fine.
    It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
    Thank you for your support.
    Best regards,
    Alexandre Ventura
    Message Edited by AlexandreV on 01-25-2008 04:56 AM

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • Error message on Windows 2000 startup, "Tcmsvr.dll, File is missing"

    We get the same error messages three times on Windows 2000 startup on some of our companys computers: "Tcmsvr.dll, File is missing". The computers are Tecra s1 models.
    Which Toshiba driver is this related to?

    I have checked the Toshiba driver page and it seems that the common modules for Tecra S1 are not available.
    Anyway, the Tcmsvr.dll file could be also a part of Toshiba console. Its very difficult to detect it.
    The Toshiba console is available on the driver page.
    It's worth a try.

  • JRE 1.5.0_11 Startup Error with MS Windows Vista. Please help!

    Hi there, I am hoping that someone can help me with this very confusing problem. A friend of mine made a program for me last month using java. It works brilliantly on computers running MS Windows 2000 and XP but as soon as I installed it on one running Vista I get this error:
    Startup Error
    An error has occured during startup:
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at com.exe4j.runtime.LauncherEngine.launch(Unknown Source)
         at com.exe4j.runtime.WinLauncher.main(Unknown Source)
    All the computers, regardless of operating system, are running the same version of JRE.
    I would really appreciate any help that anyone can give me as this problem needs to be resolved as a matter of urgency and my friend who made the software has gone on holiday and I cannot get hold of him at the moment. Also, I apologise in advance if this is the wrong section to post this problem.
    Thanks!

    Seems to be a problem with exe4j. Ask your friend to deploy a platform independent version of his program as well.

  • Windows 7 64-bit instal error on new ST9750420AS Momentus HD in HP Envy 15

    windows 7 64-bit installation error on brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in HP Envy 15 
    I installed a brand new ST9750420AS  Momentus 3Gb/s 750-GB Hard Drive in my HP Envy 15 laptop, and I was getting an error in the last installation step of Windows 7, 64-bit, ultimate, indicating that Windows could not support or be installed on the computer hardware.  It turns out that the drivers for the new internal hard drive, need to be installed/loaded during the initial windows install.
    the drivers that ended up working are available from intel at:
    RST Driver Files v.10.1, 64-bit
    the steps that are requires are:
    1) download the f6flpy-x64.zip file above, and unzip to a usb pen-drive
    2) when installing windows 7, in the configure option of the volumes, even if windows appears to recognize the drive, it is recommended to delete all existing volumes (Advanced options), and then LOAD DRIVER, and BROWSE to the usb pen-drive, while indicating to only list drivers that are compatible with the hardeware.  here is quick list of similar steps with diagrams.
    3) in this case the compatible driver name is "INTEL MOBILE EXPRESS CHIPSET SATA RAID CONTROLLER¨
    4) continue to configure volumes, and installing windows 7,
    5) everything should work fine.

    Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.   
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
    If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

    Hello,
    When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
    When I manually download the latest copy of itunes and double click to install it, it failes with :-
    iTunes installer completed
    The installer encountered errors before iTunes could be configured
    Errors occured during installations. your system has not been modified
    Please run the installer again. finish to exit
    When I look at the event loggs I can see :-
    Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
    Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
    Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
    Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
    Many Thanks

    Hello there, G-Oker.
    The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Particularly:
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Proto html preview error in creative cloud

    The HTML preview in Creative Cloud doesn't work properly. :-( I can only see my prototypes in the proto app. When I'd like to see them in Creative Cloud in a browser, clicking the magnifier icon below the preview image, I can see only plain text with

  • Autoreconcile many statement lines against payment batch

    Hi all, I'm trying to reconcile many bank statement lines against one payment batch via the Autoreconcilation report. But is this possible? If yes, what are the steps which i should follow? First of all i created invoices in AP, validate and account

  • IPod doesn't restore ... An unknown error (1439)

    I am trying to restore a iPod via iTunes and am receiving this error message - iPod "iPod" could not be restored. An unknown error (1439) When I put the iPod into disk mode and try to access it via Windows Explorer I get this error - Please insert a

  • Sd abap quries

    hello to every one , iam trying to do abap quries can any one plz send me the screanshorts , how create abap quries , my mail id :-<b><REMOVED BY MODERATOR></b>

  • Redeemed Gift Card But Credit Balance Not Correct

    Hi I redeemed two 50 USD Itunes Gift card in my account however while redeeming each, 25 USD redeemed and it got 25 USD as credited. So totaly It redeemed 50 USD and got 50 USD as credited. I never face such a kind of thing however I can not use also