HP Pavillion TS Laptop stuck in "preparing automatic repair" loop.

My HP laptop has run perfectly up until now.
When I turn the device on, it tells me that it's "preparing automatic repair" and it stays there, I've waited for hours on end but it doesn't seem to really be doing anything. All the f# keys work perfectly except f11, the one I need to use to attempt to restore the OS to a date when it actually worked. While it'd be neat if all my data could be recovered, it's not required. Thanks for helping.

, Hello and thanks for posting on the HP support forums. If you can please post back with the full Model and Product Number of your notebook. Here is a link to help you with this. HP Notebook PCs - How Do I Find My Model Number or Product Number? Until then try doing a hard reset on the notebook and see if it will clear up the issue. HP Notebook PCs - Performing a Hard Reset or Forced Reset Please post back when you have a chance. Thanks again for posting and have a great day.

Similar Messages

Hp 2000 preparing automatic repair loop

I recently purchased the notebook and do not have a windows 8 disk and cannot do anything from the InsydeH20 setup utility version F.37. How can i get it to boot up?

Hi CodyC,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are stuck in an automatic repair loop. From all my research it appears that you do need either an installation disc or a recovery disc. If you can get into into safe mode then you can try this Microsoft Answers link but with it being Windows 8 you need to get to the OS to trigger safe mode
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hp Envy stuck in preparing automatic repair screen won't boot up

My Hp Envy TS m6 Sleekbook is stuck on the preparing automatic repair page..I've tried restoring it using the f11 key but then it goes to another black page with the Hp logo on it and it says please wait and again remains stuck..I've already backed up all my information so I don't mind restoring it back to factory settings but it just won't let me do much of anything!! Please help!!

@Kmarcast18 ,
Hello and welcome to the HP support forums. From what you are stating you system sounds like it is stuck in a repair loop and just cant proceed.
You mentioned tapping F11 to get into the menu and on most system that will work.
Here is a link for the service manual. The reset for this system is listed on page 80.
One thing you can try as well is to remove the battery. The process is on page 32.
With the battery out and the power cord removed. Hold the power button down for 30 seconds.
Put the power cord back in and boot up holding the F11 key again to see if you can get into the restore options. If this works great. Shut the system down again and install the battery.
At this point if that fails you will want to contact phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Shows "Preparing Automatic Repair" then shuts down immediately

I was using my laptop awhile ago and then it suddenly shuts down, I thought it was just the battery that is empty so I tried to plug it in and turn it back on.
And now its only showing "Preparing Automatic Repair" and turns off automatically before I can even press any function keys.
I tried to reboot it by removing the battery and the plug then holding down the power button not less than 15 seconds, but still the same. Still wouldn't turn on.
Please help. I badly need my laptop.
Thanks in advance.

Hi,
Follow the steps listed in the below link
http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/Laptop-stuck-on-Preparing-Automatic-Repa...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

*HELP* laptop displaying "Preparing Automatic Repair"?? Don't know how to fix it??

Hii!
I've had my laptop for less than 12 months. It was being slow so I decided to turn it off and back on again. When I did this, the laptop displayed 'Preparing automatic Repair' then the screen goes black.
I don't know how to go about resolving this issue.
If anyone can help me in any way, I would be more than grateful.
Thanks!!

Test your hard drive using Diagnostics:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03467259&tmp_task=solveCategory&cc=us&dlc=en&lc...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows 8.1 stuck on loading/ automatic repair screen help

hello I have a hp pavilion g6 and 8.1 is installed on this computer. used it this morning and then went to use it this afternoon now it won't load farther than then welcome screen logo comes up and the dial keeps spinning then screen goes blank. then if I shut the laptop off and restart the laptop it goes to automatic repair screen then goes to your PC did not start correctly, and it wot let me refresh because my PC is locked with a password. HELP I need my computer for school

Hello , I have read your post on how your notebook computer is stuck on the SPLASH screen of your notebook computer, and that the a blue screen appears with the cursor moving involuntarily. I would be happy to be of assistance! Did you add any new software or hardware to your notebook recently? What does the error message say on the blue screen? If you are able to boot into Windows 8 Safe Mode, please uninstall the following updates: a. KB2982791 b. KB2970228 c. KB2975719 d. KB2975331 Additionally, I would encourage you to post which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit? Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards

Preparing automatic repair error in windows 8.1

Hi,
My lenovo Z580 doesnt boot and is stuck with the error "Preparing Automatic Repair" and then "Diagnosing your PC".
Tried out novo button "System Recovery" but it follows the same loop.
Please help.

Hi,
My lenovo Z580 doesnt boot and is stuck with the error "Preparing Automatic Repair" and then "Diagnosing your PC".
Tried out novo button "System Recovery" but it follows the same loop.
Please help.

Diagnosing your PC/preparing automatic repair

My PC (laptop) hp pavilion sleekbook 14 (not touch screen) windows 8 had been saying "diagnosing your PC" then" preparing automatic repair" I've had this problem for like a month and I thought it would go away but it hasn't someone PLEASE HELP!! And do I have to get a new one or go get it checked??

Please i need help, i have a hp laptop. I dont know much about it yet, but i know its hp 15 notebook, intel pentium processor, 4 gb ram, windows 8.1. Thats the little i know for now. Sometime ago i did system restore on my laptop, after which when rebooting it shows the hp logo then shows a screen saying your pc run into a problem and needs to restart, after that it shows preparing automatic repair then the screen goes dark for about 6 min, then it shows diagnosing your pc. After that it says your pc did not start correctly, given me two options: restart and advance options. Click on restart it goes through thesame process again, and i've tried the other options still didn't work. I dont know what to do. The worst part of it i haven't done recovery set yet, i've tried command prompt didn't work. Please i need help. I need this laptop for my coming examination in school. Please someone should help, i'll be greatfull

Lenovo G505s windows 8, preparing automatic repair then black screen

Hi,
Since a few months I have a lenovo G595s with Windows 8 installed, the thing is I don't know much over computers, but last tuesday I was just working and my laptop was next to me without any task, and somehow when I was going to reuse the computer I wasn't able because the screen where all the apps are was frozen, so I tried with CTR ALT DELETE nothing happened, then I just turn it off, and since it only goes on with the Lenovo logo, in the under part says or appears Preparing automatic repair and like 1 min later it goes completely in black without turning off.
I tried el the F keys at the beggining of the start, in the middle, with a windows CD as well, but I just don't get access to the BIOS or any other configuration, only black screen, doesn't matter how long I leave it on.
If somebody could help me to find out what is happening with the computer.
Thank you a lot

hi Dlskmalpik,
Welcome to the Lenovo Forums.
Automatic Repair usually kicks in if there's a problem loading up the files that's required to start Windows. If the repair was interrupted and the screen just goes into a black screen then there's most likely a hardware component that's malfunctioning.
To check, try to:
1.Boot into the BIOS by pressing the OneKey Recovery button
- Link to picture
If successful, set the following settings in the BIOS:
Security Tab:
Secure Boot = Disabled
Boot Tab:
UEFI = Disabled or Legacy
Boot Mode = Legacy
Boot Priority = Legacy First
Exit Tab
OS Optimized Defaults = Other OS or Disabled
When done, press F10 (or Fn+10) to save and exit and try to boot from your Windows CD (i'm assumming this is a Windows 8 disc).
2. If you're successful in booting from the Windows 8 Disc, see Step 1 to Step 2 of this guide on how to proceed in fixing the issue.
3. If the problem remains, consider re-instaling Windows by pressing the OneKey Recovery button and choose System Recovery
- Link to picture
In an event that the recovery fails, I recommend you contact lenovo and report the issue as you may need to send the unit for service..
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Yoga 2 Pro Windows 8.1 stuck in automatic repair loop

So my Yoga 2 Pro is stuck in the (in)famous Windows 8 Automatic Repair Loop, and I'm not sue how to fix it now. I unfortunately neglected to create a Recovery USB stick, so what are my options without it?
I've already tried booting the computer with the Novo button and choosing System Recovery, but at that point the system goes right back into the Automatic Repair loop. I'd strongly prefer to back up my data before resintalling Windows if that's an option--is it possible to stick the SSD into another computer to do so?
Also, would a USB recovery disc created by someone else with a Y2P be useable on my system? I don't need the full partition image since the one already on mine should suffice. I'm also unsure of my system's Windows 8 Product Key, where can I get that if/when I do need to reinstall Windows?
Thanks for any help, it's greatly appreciated.

First and foremost, good luck:
Method 1:
Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
Click the 'Advanced Options' button
Open cmd and type:
bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD
and also
chkdsk /r c:
chkdsk /r d:
Method 2:
https://www.youtube.com/watch?v=iNKEsOF7e4M
Method 3 (copied from a youtube comment):
1. Turn on the computer.
2. Wait for the machine to boot into the 'Automatic repair couldn't repair your PC' error message.
3. Click the 'Advanced Options' button
4. Click the 'Troubleshoot' button
5. Click the 'Advanced options' button
6. Click the 'Startup Settings' button
7. Wait for the system to reboot into the 'Startup Settings' menu (is the same menu for safe mode)
8. Select the 'Disable early launch anti-malware protection' option. (Press '8')
9. If this worked for you, you should now boot into windows.
10. Now you can shutdown your system and it should hopefully work first time the next time you start the system.

Lenovo G780 stuck in Automatic Repair Loop after Windows 8 update

My recent Windows 8 update stuck my computer into an infinite automatic repair loop which results in a blue screen amd the process repeats itself. I tried the OneKey restore feature and the system recovery feature just hangs then it goes back to the same loop issue with rebooting. I called Lenovo for recovery discs since I don't have any any but my concern is does it matter if I mentioned whether I had a 32 or 64 bit OS? I told her to make sure it was for a Windows 8 system amd she just said it works for the G780 models. I'm just hoping these discs work.for a 64 bit system

It should work. Support cannot send you recovery disks if you didn't provide them your serial number. They can check the correct pre-installed OS from your serial number so I'm sure they're sending out the correct disks.

Server 2012 R2 Essentials stuck in Automatic repair loop on every reboot

We are running Windows Server 2012 R2 Essentials on a brand new Dell PowerEdge T110. Nothing new has been installed or are we running any special software. This server is a doing DHCP, Domain Controller and DNS. It is also intergrating the Office365.
I am assuming a windows update did this but i cannot pinpoint when exactly this happened and which update since it was a couple months ago. But everytime we try to reboot this server it goes to that Windows 2012 repair screen and asks us if we want to troubleshoot.
I am able to break this loop by going into safe more and then rebooting but this doesnt fix it, it only allows us to then boot windows normally once after that. But this can only be done when we are onsite and not remotely so we havent rebooted this server
or ran new windows updates in quite some time.
Any help or input would be appreciated.
Thank You

Hi,
On current situation, please use Bootrec.exe to troubleshoot this issue. for more details, please refer to
the following KB.
Use Bootrec.exe in the Windows RE to troubleshoot startup
issues
Meanwhile, please refer to the following similar thread and check if can help you.
Windows
Server 2012 essentials stuck in automatic repair loop
Hope this helps.
Best regards,
Justin Gu

Preparing Automatic Repair Windows 8 Boot Camp endless loop

I recently restarted my Macbook pro with windows 8 installed on boot camp to install updates for windows 8.
The first two times it restarted, I got the windows loading screen (4 blue squares) then when it finished loading I was sent to a black screen.
Next, I tried restarting in safe mode to run repair and by spamming F8 + FN I was still unable to get to safe mode and instead got a "preparing automatic repair" message below the windows blue squares loading screen. It stays like that and does not do anything else. I am letting it sit right now.
How do I fix this? I installed via a .iso and have no windows 8 disc.

Unfortunately did not have a backup, I didn't lose much that I care about but it will be a hassle reinstalling all of my programs.
I've researched this error and the common response is to insert a windows install disc and go through the repair system. I was hoping someone could walk me through how to do this on boot camp, since I can't seem to figure it out - I have no boot disc.

On start up I get the loga and preparing automatic repair then go blank and does nothing

When trying to resart my teens computer I get the logo and then a message preparing automatic repair then the screen goes blank and nothing?

thank you.
I did try that but i got the same results. i repaired my disk permissions and my disk from my boyfriends disk utilities. it took over an hour but so far back up and running. i intend to back up everthing and reinstall my operating system.
thanks for getting back.
j.

Never ending automatic repair loop

I'm working on a client's HP ENVY TouchSmart 4-1215dx Ultrabook that is stuck in a never-ending automatic repair loop. I have done a system diag...all passed . Tried multiple ways to get into BIOS to do a repair from a USB stick made from another OS 8....but can't get into BIOS to change the boot. Tried F11 to do factoy resest....just puts me back into the loop. I have a feeling my client downloaded a bad 8.1. Considering pulling the HDD and using my desktop to at least try and save her personal data....Please help!

Kris_ClearFIxPC wrote:
I'm working on a client's HP ENVY TouchSmart 4-1215dx Ultrabook that is stuck in a never-ending automatic repair loop. I have done a system diag...all passed . Tried multiple ways to get into BIOS to do a repair from a USB stick made from another OS 8....but can't get into BIOS to change the boot. Tried F11 to do factoy resest....just puts me back into the loop. I have a feeling my client downloaded a bad 8.1. Considering pulling the HDD and using my desktop to at least try and save her personal data....Please help!
That would be the best thing to first do and then use the recovery media of which you will now have to order since the O/S seems corrupted beyond repairs. This way you can be sure the recovery media will restore it back to factory install and hopefully they will not do this again til they will consult first before upgrading the O/S.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

HP Pavillion TS Laptop stuck in "preparing automatic repair" loop.

Similar Messages

Maybe you are looking for