HP Photo Creations - where's the text and graphics tabs?

I downloaded V 3.5 HOwever I can't seem to find the tabs for text, graphics, etc. All I can find is touchup, crop, red eye, and one or two others. But where is the text and graphics, and the other cool ones.? I'm sure I downloaded 3.5.
melodee007

Hi Melodee.
The additional editing tools appear with collage projects. When you choose basic prints, you'll see only the touchup tools (crop, image adjustments, red-eye, airbrush, tint).
In other words, to add text, borders, and graphics, choose Collage Prints instead of Prints. This link will take you there:
Collage Prints
There are quite a few cool effects in the touchup section, though.
Under Image Adjustments, click Advanced Controls at the bottom of the screen to try the Posterize effect.
Under Airbrush Effects, try the Rub Through, Blur, and Monochrome brushes.
Rub Through loads a photo in the background that's slowly revealed as you paint over the original photo. Blur is good for toning down distracting elements in your picture, making a snapshot look like a photo taken with a fancy lens. The photo below uses both those plus the Monochrome Brush.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Similar Messages

Why are the text and graphic elements are not showing on the iPad

I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
Richard

They're called overlays for a reason. You'll need to change the text to an MSO as well.
Select it, create a new MSO, set it to play once no delay, no crossfade.
Other choice would be to put the text into each state of the MSO.
Bob

Why are the text and graphic elements not showing on the iPad

I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
Richard

http://forums.adobe.com/message/5246914#5246914

Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
See Firefox built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*You can use the following to go to the Firefox profile folder:
**Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Where is the passwords and security tab?

I need to change my security quesitons because i forgot the answers. People have said to go to appleid.com and click on the password and security tab. I can't find that. Help!

Rescue email address and how to reset Apple ID security questions

Where is the Text and Filter Pop-Up Menu in Aperture?

I am very new to Aperture, and I am having trouble finding the Filter Pop-Up Menu and the Text Box. Any help would be appreciated. Thanks!

The text pop-up menu you read about may have been the Add Filter pop-up menu in the Query HUD (Cmd-F). You can use it to add additional text search boxes to the HUD. You already have one by default in the upper right corner of the HUD.
That's for searching.
Again, if what you're trying to do is overlay text on an image, you can't really do that except as I described the previous reply.
If what you're trying to do is enter text to an image's metadata, you do that in the Metadata Inspector (I).

Why won't text and graphics line up in adobe premiere?

Hey, I have been out of the editing thing for about 8 years now. I recently needed to make a video for another business I run.
Anway, I am using animated / still graphics and the basic text titles that come with premiere. I see that the graphics line up correctly behind the text in the Previews Folder. When I render it, the text has shifted down completely. Also, the text and graphics look horrible after it's rendered, very pixelated. I used to be a pro at this stuff and in fact, I would use flash to import my animated graphics. But it seems that doesn't work anymore either. (That would probably solve this problem too). Anyone know why this is taking place in the final render??
I would much rather you ask the questions before i post all sorts of unnecessary info.
Premiere Pro 1.5.1
Thanks!

1. not sure what you mean by "preset". The project settings are:
General -
Capture - DV 1394 -
Video Sequence -
Default Sequence -
2. The dimensions of the stills are 2000x2000, *.png
3.Titles - I do not align them here, I align them in the effects controls
4. Screen Cap
5. Export settings
6. That article is nice, but not what I'm needing. remember, the preview clips shows everything perfectly lined up. but the final export shows all the text being shifted down.
Thanks for the reply, I look forward to a response and I hope these answer your questions.

Mac osx lion screen texts and graphics jitter/flicker during scrolling

Hello,
I have recently upgrade my macbook (late 2008, the only aluminum Macbook model) to OSX Lion, and the screen scrolling is causing fatigue to my eyes as the texts and graphics jitter/flicker even at the slowest scrolling speed setting. This problem causes serious discomfort to reading long text on the screen that requires scrolling.
Have anyone experienced this problem? Is there away to make the text scroll smoothly without jitters?
Thanks

HI PAT:
HAPPENING to anyone that has the old Acrylic Cinema displays that use the ACD-DVI adapter.
unplugging the adapter and replugging solves the issue bu it only last for one session if you reboot the flickering comes back so you have to unplug and replug again. is a Pain in the B.
lot of people complaining about it. https://discussions.apple.com/message/16357859#16357859http://
Hope this helps
AppleLou

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

You dictate after you open a blank page in any text editor. The text goes on the page.
You can use Text Edit for example (in your applications folder).
With the blank page open, go to the Edit menu and select Start Dictation. When you are finished, you save the file as you would any other document. You can retrieve it, edit it or anything else you want, because it is a file like any other you create with that text editor.

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

Filling the text and assignment automatically of WA document

can anyone please let me know where in SPRO do i configure for populating the text and assignment fields of WA document(accounting document) generated after GRN (movement type 105)?

Hi,
Good Day,
Maintain Sort Key field under GL Account (FS00) - Control Data Tab for Automatic Assignment.
Best Regards
Suresh Kumar K
If this info useful then assign points.

Where is the text stored when we create a discussion under Urgent Requests?

Hello,
Under the Urgent Requests when we create the discussions
where is the text stored. Under which folder is the text stored? I would like to modify the text. Can anyone help me?
Thnx in advance.

hi murali,
actually discussions are of two types in portal...one you start at any folder or document level and second is you start under ur HOME role in discussion .
First type of discussion is stored in /collaboration repository and second type of discussion is stored in /discussiongroup repository. you can find these repository in content admin -> km content
hope this will help you.

How cna I change the text and background colours in iTunes?

Can anyone tell me how I can change the text and background colours in iTunes? I am a visually impared user and my main requirement on a PC is to change the colour schemem to white text on a black background. Most software adopts the settings of your colour scheme but iTunes goes it's own and has everything on white backgrounds. I cannot read from white backgrounds (dazzle - that sort of thing). I have never used iTunes for this reason. I have always been a devotee of by far the best media player out there Musicmatch Jukebox, who allow you to edit skins in every detail. However, recently Musicmatch was taken over and users were forced to migrate to the ridiculously poor Yahoo Music Jukebox. A massive downgrade in so many ways.
I want to use iTunes but will not be able to if I cannot sort this issue out. I downloaded 7.5 before discovering that if you want to use Multi Plugin for skins you need to go back to iTunes 7.02. I've done that, but the skins available are completely pointless to my eyes. They don't change the colours of the main components, just the graphical bit at the top.
What I need to do is change the background of the main browser windows so that they are black and the text is white (you know the track lists and tree views, etc). This must be a very simple case of just changing the codes somewhere, but I can't find where. I read somewhere that you need to hack into something call ResourceDB inside a file called iTunes.jar. There is no such file on my PC. Could that be a Mac thing?
Please help someone if you can. I would like to become an iTunes user. There seems to be more music available than on Napster which I currently use.
Thanks in advance
Z

In my opinion, it seems that Apple has decided to sacrifice usability so that iTunes would look more like a Mac application. You are probably already aware that using Windows' built-in high-contrast settings do not work in iTunes.
I did some hacking at the resource file a while back, but I was unable to figure out how to change the color of the background. IIRC there was a resource whose description indicated it would change the background color, but when I changed the resource, nothing happened.
I was, however, able to figure out how to make the "large" font much larger (any size you want, I suppose). Will that help? See
http://home.comcast.net/~teridon73/ituneshacks/index.html
You should provide feedback to Apple:
http://www.apple.com/feedback/
I don't think it is too harsh to call it "shameful" that Apple has chosen this design path. Where I work, we are required to make ALL applications (or any computer interface, such as a website) section 508 compliant. Of course, I'm being a bit of a hypocrite, because I've made no effort to make my website compliant. If you have trouble reading it, please let me know.

How to get my text and graphics to scale with the browser dynamically?

Hi there!
I've run into an issue where, with my design - I'm trying to get text and graphics to scale and move with the browser as someone adjusts it. (As opposed to it moving and falling apart as the browser window gets too small.)
http://www.richardsuchit.com is where it's posted at the moment.
I'd it to maintain it's position in the center of the browser window no matter how small or large, just to adjust in size, rather in position. I wonder if this is possible?
Looking forward to your answers! Thanks.
-Richard

Hi
Here is a sample file of text that re-sizes according to your window size.
https://www.dropbox.com/s/z7hqxejysuxs597/Sample.zip
Regards
Susanta Kumar Muduli

IPhoto, prompt kept coming up asking if I was sure I wanted to delete photos. I unchecked the prompt and I want it back. How do I get it back?

iPhoto, prompt kept coming up asking if I was sure I wanted to delete photos. I unchecked the prompt and I want it back. How do I get it back?

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7or later : Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

HP Photo Creations - where's the text and graphics tabs?

Similar Messages

Maybe you are looking for