Hp photosmart 120 camera and new computer compatiblity

I picked up a used hp photosmart 120 camera with a card and a USB cable (no software or instructions) and I hope it will work with my Laptop with windows 8.1
I have never used a digital camera before but it is making pictures in the video screen on the backside of the camera. I do not know if software is required or if I can just plug in the USB cable into the laptop.
I saw that the downloadable software didn't include windows 8.1
Thanks

Hello, I have the same exact question. I just bought this Hp laptop, am running windows 8.1 and I woul like to get my "old but still great working" Hp 120 digital camera to be able to down load pictures on this computer.
Maybe someone from Hp can give us some help here.

Similar Messages

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

Move the content from the old computer to the new computer.
Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
It should now be possible to sync via Wi-Fi to the new computer.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

Actor/Writer must purchase a video camera and mac computer. Please help!

I'm an aspiring actor who has decided to purchase a camera and mac computer. I decided this after much contemplation regarding my current situation. I'm leaving too much in other's hands by holding out hopes to use student film footage for my reel. The truth is, of the student films I've acted in, the quality of each film is mediocre at best. I'm not comfortable with the idea that putting my best foot forward with agents and managers submission packages (headshot, resume, reel, letter) will be these films.
The bottom line is, I want to take full control of the situation. And by doing that, I want to purchase a camera and mac computer to edit and burn the footage with (writing my own scenes, gathering Boston and NYC based actors via Craigslist). I should add that my desire to buy a camera goes beyond creating my reel. I also have a strong interest in putting together some short films I've written.
I don't know much about cameras, so I guess the first question is do I get a standard or HD camera. Also, do I opt for something like a Canon XL2, or aim for something under a grand? A good friend mentioned once that if I wanted to start shooting films to submit to festivals, then to go for a XL2. How long would it take me to learn how to use said camera? What would the difference be if I aim for something under a grand quality wise? If I don't get such a pricey camera, than I'm looking at a mini dv based camera.
I want to do my full on research before I invest in anything. Price is not an issue. Everything is going on credit cards and I want this to be the main focus on my life. My reel and my short films. With the reel coming first.
As for a mac, I'm thinking about a macbook pro, unless anyone here suggests otherwise? It has to be a laptop for when I move back to Manhattan in the fall with my finished reel.
Any and all comments are greatly appreciated in advance. Feel free to ask me any follow up questions if you need more info to make a suggestion.
A huge thank you in advance. Cheers.

Dear Blair:
Because you and I are in similar
circumstances, I decided to add
your thread to my active list.
You can see my writing in Goat's
thread, "choosing a camera," to
recognize the similarities and
differences in our positions.
In a nutshell, I am gearing up
for music video production, both
custom order for bands and for
cable release.
I can tell you a couple of things
about ordering your Mac Pro.
Most everything has already been
taken care of by Mac, but be sure
to option the 7200 rpm hard drive.
The price diference is negligible,
but the recommendation regards
audio quality.
Second, be sure to get the 4mb
L2 cache, not the 2mb. I think 4mb
is standard, but check it out.
The reason is that with long runs,
the cache does not have the chance
to refresh itself as often as it
would in, say, web surfing, where
you stop and go frequently. I was
uncdertain about this when I ordered,
but fortunately, the machine came
thrugh with a 4 mb L2.
I thinnk you are all right ordering the
MacBook Pro at this time. I have no
regrets. Still, there are things to
be considered, and that's where I am
right now. So, see the thread and keep
in touch. There are a couple of outstanding
contributors to the thread, ian and integron,
to name two.
In your field, post dubbing is going to
be very important to you, am I right?
To get the best quality you want a
synced scratch voice track and capacity
to improve it in the studio. So, in
your search, be sure your rig supports
true voice overs, meaning, you can listen
to the original audio while watching the
action, and over dub a studio quality
track. Remeber, everytime the cameraman
moves the camcorder, the mike moves. You can
see the problem.
In my case, music video, live, I want
a separate audio master, which goes into
the release track along with effects and
narration, and that master has to be good
quality and consistent level. Got me?
In your case, what they call a scratch track
is the basis for later studio reproduction,
I mean, you watch the picture and lip sync the
words.
You mention camera and that is what we are
talking about in the thread mentioned. I have
used Adobe Premiere, so I assume Final Cut
is going to do the job. I did add Final Cut
Express to my Mac order, and it came in the
package as a CD, for an extra $80. I think
it will have been worth it.
So, those are the only three options I asked
for when I ordered the Mac -- the cache, the
HD speed, and the FCE.
Like you, I am looking at the Canon and the
Sony tape storage. Before I jump. I want to
be danged sure the MacPro will support editing
functions. We are discussing now the CCD vs.
the CMOS and there are several issues. I am
hoping to shoot Hi Def wide screen original,
loking ahead. I don't htink that may be an
issue with you. As I see it, you want to basically
demonstrate your talent. However, editorial
ease and control should be an issue with you.
Remeber, the studios are run by very conservative
people, so you might lay low on the tech dazzle
and pitch to the fundamentals of acting with
a nuts and bolts presentation they are more
likely to respond to as opposed to drawing
attention to the technology, which to them
simply represents more unwanted investment.
Best wishes,
Ed Shaw

Media based deployment for Refresh and New Computer

Hi ,
I am looking for some pointers for using media based deployment for refresh scenario (xp to Win 7 with USMT) and new computer deployment (without OS).
Setup we have is Configuration manager 2012 R2 integrated with MDT 2013.
I need some pointers on below:
- Since its winxp to win 7 and its boot images that comes with (ADK 8.1) confi. manager 2012 R2 doesn't support it. Article says we need WINPE 3.1 for such scenario. Since its MDT 2013 (again ADK 8.1 boot images only), how do generate WinPE 3.x for
MDT based boot image?
- Since it is going to be 2 deployment scenarios, do i need to have 2 separate TS (one for new computer and 2nd for USMT based deployment for refresh scenaro) or is there anyway to manage both scenarios with 1 TS?
- If we need to have 2 TS, do we need to have 2 media created or 1 media can have both TS (like in MDT we have selectionprofile with multiple TS and then media created including both TS)
Looking for some options to deal such scenario. Thanks
Regards,

Check out this blog post also:
http://blogs.technet.com/b/configmgrteam/archive/2013/09/12/how-to-migrate-user-data-from-win-xp-to-win-8-1-with-system-center-2012-r2-configmgr.aspx
Jason | http://blog.configmgrftw.com

During sync, itoons error message "User's iphone cannot be synced. You do not have enough access priviledges for this operation." Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

During sync, itoons error message "User's iphone cannot be synced. You do not have enought access proviliedges for this operation". Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

I hope this helps. Not the easiest fix, but I suspect it will solve the problem.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/itun es-privileges-error-with-windows-7/d616e06f-ecdd-4d34-8d7a-a9936a91ad6e

I bought and new computer and I need to download my cloud membership to it without access to my old computer

I bought and new computer and I need to download my cloud membership to it without access to my old computer

Just download and install it like you did originally.
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

No connection between camera and new MAC

I just bought a new computer and want to upload my photo's from my camera (D 7100) in CS6, but nothing happens at all! Yesterday on my ols MAC it just worked fine. Does anybody know what to do?

Best best is to use a usb card reader to transfer images.

Have a Panasonic PV-GS9 mini camera (tape)-newer computer with 10.7.5 iMovie does not recognize. Previous computer with 10.4.11 worked?

Mar 28, 2013 11:36 AM
Have read a couple of "how to" downloads (iMovie'11:import video), followed the instructions with no success. Am using cable with firewire connector.
Any ideas?
thanks,
Bevo 36
MacBook Pro, Mac OS X (10.7.5)

Hi - my notes on this
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

New Ipod and new computer-how to transfer

I just got the new ipod video and had the 20gb. I now have a new computer and new ipod. How do I transfer my songs to my new ipod and computer?
any help would be appreciated.
D

If you transfer your library from the PC to the Mac, and then plug in your new ipod to the new Mac, a question will pop up asking you whether you want this computer's library to be transferred to the iPod. Click Yes, and it will start synching with whatever is in the library.
You can also use some programs, like "Senuti" (for mac, freeware) to rip off the contents FROM your iPod TO your new Mac. I personally like Senuti since it has an iTunes-like interface except in reverse.

Sync applications problem with 3GS and new computer

Hopefully someone can help me out. I am trying to sync my fiancee's 3GS to our new Dell laptop that has Windows 7. I had no problem syncing and updating my 3GS with the same computer last night, I updated to the 4.0 last night on my phone. I then tried to update her phone. It asked me to backup and sync all data prior to updating. I was able to back up and sync contacts and photos without a problem. I tried to transfer the applications; and now I keep receiving this message: "Some of the purchased items on iPhone could not be transferred to your iTunes library because you are not authorized for them on this computer." I certainly authorized the computer; thinking that might be the problem, I deauthorized and reauthorized the computer successfully (It says that I have one out of 5 possible computers authorized). That did not solve the issue. I researched into the topic; and now my brain hurts. One of the threads requested to disable the automatic sync when the iPhone is connected to the computer. I reset the settings, powered down the iPhone and exited out of iTunes; rebooted and still no success. I am getting frustrated but do not want to erase all of her applications and buy them again. This message is applying to both free and purchased applications. When I look at the applications page on iTunes; all of her program icons are apparent. I am not an iPhone genius, but I read that the new computer has never recognized the phone and the sync will go from computer to phone (if I understood correctly). Does that mean I need to reinstall iTunes and start from scratch with this computer; or is there a solution? Both of our phones were rarely synced with our old laptop; but I worry that syncing with that computer will only further complicate the situation. Without transferring the applications, I am hesitant to update the phone to 4.0 and the new carrier settings. Do I just let the computer try to transfer the applications it allows and then lose my apps and do the update? I don't want to do that unless that is my only choice. Please help me!

Not sure if this helps, but:-
I just got an IPhone4 - Gave My IPhone3 to husband.
We ended up hsving to set up two login users on the PC (not sure how to do that) and then two seperate ITunes accounts, one for each of us.

New ipod and new computer, how do I get my songs back?

I recently moved. In my move, my ipod shuffle was damaged, but is now replaced(thankyou warranty). But I also have a new computer. I've logged in and my account appears, but where have all my purchased itunes gone? How do I get them back? I really don't want to buy all those songs again.

Restore them from the old computer, or click here and fill out the form, or purchase them again. It is the responsibility of purchasers to make backups, and Apple rarely allows people to freely redownload purchases other than applications because Apple pays a royalty on other types of content.
(41728)

Using bluetooth for ipod touch and new computer

My computer with itunes crashed. Can I use bluetooth to put the music on the ipod touch to my new computer and new itunes?

No. Do this instead
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

IPad syncing issue between old and new computer.

I 'm trying to sync my iPad to a new computer, but it says my iPad is already synced to another library. My previous computer and data is no longer accessible. I do NOT want to lose what I have on my iPad, its a real pain and its happened before: the message says I would have to ERASE! everything to sync it. This really makes me hate iTunes. Thoughts? Help?

iPhones are not really designed to be synced, or even manually managed, with multiple computers. You should sync with a single library. Depending what you've done so far you may in fact have the same library on both computers, but if not see this tip on migrating your library.
Even when you have exactly the same iTunes library on two computers iTunes "knows" to sync the pictures from just one of them, though in my experience they have stayed on the device when syncing with the other machine. If you copy the pictures over to the new computer, then select the folder to sync photos from on the new computer they should all get added in.
tt2

Disk mode and new computer

When I turn my iPod onto disk mode, it remains at the screen "ok to disconnect" with a checkmark indefinately. It doesn't matter if I plug it into the wall of computer or whatever. I turned it to disk mode to transfer my music onto a new computer, but that doesn't work either. I'm horribly confused. Can anyone help me with either problem?

To get it out of disk mode and remove the check mark, simply reset it.
To transfer the music to a new computer using the iPod as a hard disk, see this.
How to use your iPod to move your music to a new computer.
You'll notice that it's a different method of enabling disk use.

Hp photosmart 120 camera and new computer compatiblity

Similar Messages

Maybe you are looking for