HP Photosmart 1315 won't print through print server

I had this working for the longest time though I forgot which settings I used I am pretty sure I got it right, IP printer, using gimp photosmart 1100 and what not and it worked. recently i had to change the ip address range so i deleted the printer and reinstalled it (since i couldnt find where i change the ip its connected to).
anyways, it won't work. it says it is busy or if it eventually does print, prints garbage.
i even tried the HP drivers, though it won't find the printer when i specify the IP address.
i have a linksys wireless g router a linksys wireless g print server though i connect via cable and the mac is connected through cable. this works fine on my winbox and i cant get it to work again on the mac. any suggestions would be most helpful!

HP's drivers are written to use USB only - won't help.
Queue name is part of the address for the LPD and IPP protocols. If you don't remember using it, maybe there is another protocol that works on that print server and I just didn't see it in my quick review of the manual. For example, the HP Jetdirect protocol doesn't need a queue name (called raw port 9100/socket printing in most manuals).

Similar Messages

  • AR Invoice Printing Blank page when printed through printer

    Hi,
    I customized AR invoice to give PDF output through BI Publisher.There is no issue when tried to view the output.
    When tried to print the output through printer, It's given blank page.
    All other BI publisher reports which will give PDF output in Straight single request are printing through printer correctly.
    But AR invoice By standard program itself when fired, First a Multi Language Function will fire which will have output of 0 bytes and after that as a child request Original program with Required output will fire.
    It seems that printer is printing Parent request output.
    Can anyone please help me regarding this.
    Thanks in advance,
    Best Regards,
    Mahesh

    Hi,
    I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
    This could be a number of reasons:
    1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
    2. Printer PRT issue, extra page break could be being inserted.
    3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
    Gareth
    Blog: http://garethroberts.blogspot.com
    Web: http://www.virtuate.com

  • Always duplex printing when printing through cups server

    I have about 6 printers which people normally accesses through a cups server running on a Linux box.
    We have always printed through the cups server from the Macs we have - and this has always worked great (they get auto-detected as shared printers and so on).
    But a few months ago something changed on the Macs - they can now ONLY print duplex - nomatter what i tell them to do in the print dialog. When printing first to a postscript file and then sending the postscript file to the printer (via terminal/lpr) everything gets printing correctly - but when using the printing dialog it always prints duplex.
    When printing to the printers directly (many different models) everything works - but going through the cups server - only duplex.
    All our Linux machines prints both duplex and simplex as they should, so the cups server isn't the problem.
    Has anybody else had this problem?
      Other OS  

    Armin,
    You need to do the following to make the duplex printing work for postscript in Oracle Reports.
    You need a printer with duplex option and an appropriate PPD file.
    You also need the Unix tool sed to filter the output file.
    The problem is that duplexing is enabled in the job level set up of the PostScript document but gets reset in the page set up because paper size and printer tray information is generated for every page. The workaround would be to write a script, which removes page level set-up information for the paper size and printer tray set up commands. As a side effect of this - it is no longer possible to switch the printer tray between pages.
    Write a sed script file called 'duplexsed' with the following three lines. This
    /^%%BeginPageSetup/,$ {
    /^%%BeginFeature/,/^%%EndFeature/d
    Copy the file to an appropriate directory, for example $ORACLE_HOME/bin.
    Set the environment variable TK_PRINT:
    TK_PRINT="sed -f $ORACLE_HOME/bin/duplexsed | lpr -l -s -P'%n' -#'%c'"
    export TK_PRINT
    Note that the print command is different for the various kinds of Unix.
    You may need to refer your installation guide and make changes to the lpr command
    Thanks
    The Oracle Reports Team

  • Help on printing through Output Server

    It seems that when I print from test presentment to PDF or to the local printer through my Output Designer, I get two pages printing out which is correct. When I compile and run the .dat file through Adobe Central server, I am having the same .dat file print out 5 pages with blanks on the second and 4rth page. I have the job setup with two tasks called PGCNTGET and PGCNTSET. I would assume if my test presentment to PDF and local printer are printing correctly, it should print correctly through the server. I did remove the PGCNTGET and PGCNTSET tasks from the job and only used JFMERGe and in that scenario it does print correctly but of course without page numbering. Can you please suggest on how to debug this in Central since I am not as familiar with Central Server.

    I've never used the PGCNT agents but debugging with Central requires that you set the "verbosity" for the agent(s) to
    i trace
    mode. This can be done using
    b Central Control
    on the server - which you may not have access to,
    b or
    it can be specified as an option for the task. If the task is defined in the job management database to include the
    b @OtherJobTokens
    parameter then it can be done using the
    b ^job
    line in the .dat file. For the print agent (JFMERGE) it is done with the
    b -v
    option (-v0 sets trace mode). If it is done using Central Control, then verbosity for the Print Agent would be set to
    b -10
    (don't forget to set it back to the current setting). The agent will then put all of its trace messages in the log file (usually jfserver.log) and you will need to get that file from the server (it is plain text). Note that there are some bogus messages and others are difficult to understand but it might point you in the right direction.

  • Problem when trying to Print Statement Print through printer

    Hi ,
    I am facing a serious problem here , I customized the AR Statement Print to PDF output using BI publisher,
    It's working fine in Viewing the output . But when i am trying to pront the output through printer .It's printing XML file.
    Can anyone please help me regarding this.
    Thanks in advance.
    Best Regards,
    Mahesh

    Check style of concurrent program it should be some think like PDF Publisher A4 if DBA has defined any style for BI Publisher reports. normally we can not use styles used for other reports
    Thanks
    Kamalakar

  • Apps won't work through proxy server

    At work I have to connect through a proxy server. Safari works well but none of my apps will connect or update. can anyone help please.
    Brad

    They are probably blocking the port the apps are trying to utilize.

  • Printing to a wireless networked Photosmart 1315

    I am trying to setup my macbook to print to my HP Photosmart 1315 which is a shared printer on my XP Pro desktop.
    The driver is not included with the OS X CD, and the driver from HP doesn't include any options for network printing.
    If I add the printer, it gets added as a generic print, and it simply prints blank pages or jargon. At least the printer responds at this point.
    If I install the driver from the HP website, it doesn't seem to help. You have the option of locating a file when you select the type of printer you have, but the HP driver file is just a disk image.
    Does anyone have any suggestions. I just started using a Mac 3 days ago, so I'm a little unfamiliar, but I'm loving it. If I can get my printer to work, I'll be smitten.

    Try the generic Photosmart driver HP Photosmart P1100, Gimp-Print, that is included with OS X.
    And follow this:
    http://www.ifelix.co.uk/tech/3015.html

  • I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

    I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
    Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

    goestherain,
    I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite.  Any suggestions?

    My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite.  Any suggestions?

    Hey clutterfromduluth,
    Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Follow these steps until the issue is addressed:
    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.
    Thanks,
    Matt M.

  • HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software.  If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

  • HP Photosmart Plus B209a is no longer printing through wireless connection.  Appreciate any suggestions...

    Hello.  My HP Photosmart Plus B209a all in one printer stopped working through wireless connection yesterday.  I have tried to delete the printer and reinstall using HP Setup Assistant, but when I attempt to configure the device for a wireless network, the HP Setup Assistant quits unexpectedly. I can succesfully set up the printer, but only for use with a USB cable.  I noticed that there was an HP printer software update installed yesterday version 2.16.1. Could this have anything to do with it?  I read something about airprint in the support discussions but I dont see the nearby printer option anywhere?  I checked the list of compatible printers and mine is on there so I am not sure what I am missing here.  I would hate to go out and buy a new printer.  Any advice would be greatly appreciated. Thanks so much.

    I have the same printer but my problem stems from installing a new router. I went through the exact same steps that you did and the HP Installer crashed on me 5 different times at the exact same spot. I called HP and got through to them and after 15 minutes he informed me that this particulart printer is no longer "supported" and software is not available. I told him that I downloaded the update that was available today. He was no help whatsoever. I also can print via USB but that is not at all what I want. The downside of this printer anyways is that it is not Airprint compatible. So, its either reinstall the old router or buy a new printer. This *****!

  • Hp Photosmart C7280 won't scan but will print

    Recently my scanner stop working, when I try to scan I get an error message saying the HP Device was not found.  Try the following steps......and then try again.  I tried all the steps and I can't scan anything.  The device is online, it is working, if I try to print from the computer to the printer it prints what I want, but if I try to scan a picture or document it gives me this message.  I tried all the suggestions that the screen gives me including uninstalling and reinstalling and still get the same thing.  A few weeks ago everything was working fine.  Any suggestions on how to get this to work again.  The latest updates on my computer was installing MSIE 8.0 and the update for the printer which was supposed to help error in communications.  Seems since that update it stopped working correctly. 
    Thanks for any help
    June

    Just to let you all know thatmy problem was solved.  Not by HP but on my own.  I also have this printer connected to my laptop and have one at work and started to have problems with the program not functioningon all my computers. Two of them were Vista and 1 computer XP but all having the same problems.  I removed the software from my systems, went to HP and downloaded the latest version of software and drivers and installed them.  The screen that opens looks different  which means they have made some changes to the program, but my scanner now works fine.  I did this for all my computers and all of them are working.  I only have one problem left on my home computer desktop when I try to duplex it tells me I don't have that module installed and won't allow me to duplex through the machine automatically.  I know its there I use it at work as well.  But overall the major issues were solved when uninstalling the printer and its software and downloading the newest from the web.
    For those of you who are saying you are having problems with Windows 7, my work computer is now Windows 7 and I downloaded the program from the web and installed it, I have no problems at all.  But each computer is set up differently with different program and settings.  Make sure you are downloading the proper software and drivers.  There are two versions of Windows 7  there is the regular one (32 bit) and the 64 bit.  If you don't download the 64 bit drivers and you have the 64 bit windows you will have problems.  If you are downloading the 64 bit and you have the regular Windows 7 then you will have problems. Hope this helps some of you.

  • My printer (HP Photosmart D7360) won't print from my computer.

    When I try to print something like an Open Office  (.odt) or Word (.doc) document,  I  get no error message, it just doesn't print. The same thing happens when I try to print out recipes that I've downloaded, or e-mail. When I go to "printer settings" I get a message that says: "No default printer found. Please choose a printer and try again."  When I click on OK, I get a screen up that says:  "Printer Setup/ Name: (((hi-lited)))HP Photosmart D7300 Series/ Status: Default printer; Ready/ Type: HP Photosmart D7300 Series/Location: USB001/ Comment: (((none)))" Below this are 4 buttons, (Options) (((alone on the left))), (OK) and (Cancel) (((Center right))) and (Help) (((alone on the right))). If I click on the "OK" button, the screen disappears, and nothing else happens. Exactly the same thing happens with the "Cancel" button. The Control Panel/Devices & Printers screen shows the HP Photosmart D7300 series as the default printer.  Without questions, I don't know what else to say. This is a great pain in the butt.

    Hello @CBJack,
    Welcome to the HP Support Forums!
    I understand that you're experiencing issues when trying to print from certain programs on your Windows 7 computer to your HP Photosmart D7360 Printer. I would like to assist you today with resolving this printing issue. It does appear that there is a driver conflict occuring on your computer. That may mean that your driver is not correctly installed, or the correct driver is installed but certain programs aren't 'agreeing' with that driver. I will be running you through some troubleshooting steps below to isolate this issue and resolve this issue. Can I please have you follow the steps below.
    Step 1: Run HP Print and Scan Doctor Tool:
    To start troubleshooting I am going to have you download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you. Please click here to download the Tool. Once the Tool has downloaded please run the 'Fix Printing' option under the Tool. Once the Tool has completed please test printing again. Should no issues be found under the HP Print and Scan Doctor, but the printing conflict still occurs, there is likely a driver issue occuring between your printer driver and the programs that you're experiencing an issue printing from. Please proceed with the steps below to resolve this.
    Step 2: Alter Driver:
    I am going to have you install an alternate print driver on your HP Photosmart. Once the alternate driver is installed I will have you test printing to verify if the issue is resolved.
    Click on your Start menu
    Select Devices and Printers
    In the Devices and Printers folder right click on your HP Photosmart D7360 Printer and left click on Printer Properties
    Left click on the Advanced tab
    Left click on New Driver
    When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
    Select HP as the Manufacturer on the left
    Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
    After selecting Deskjet 9800 hit next to complete the New Driver Wizard
    Under the Printer Properties window select 'Apply' but don't hit OK
    Select the General tab
    Rename your printer back to HP Photosmart D7360 Printer
    Hit OK
    Lastly, right click on your HP Photosmart D7360 Printer one more time and left click on Printing Preferences
    Left click on the Paper/Quality tab
    Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
    Hit Apply and OK
    Now that the alternate driver is added in please try printing from the programs you were previously experiencing issues with.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • My new hp photosmart 7525 won't print

    my new hp photosmart 7525 won't print and says it is "offline". In addition, the tray app error keeps coming on. I uninstalled my old printer. I have Vista.

    Hi @hannabanna 
    I would like to help you print to your 7525. Let's first address the tray app error, then we can focus on the printer offline message.
    The tray app error seems to be stemming from the older software you have uninstalled, it appears something did not fully uninstall. Please complete the following steps.
    Please note; I simply choose the printer I did for steps 3 because of the version of software, we will not be installing this printer, I only want to use it to perform a comprehensive uninstall.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > HP Photosmart C7280 All-in-One Printer
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Step 14 will help you to re-install the 7525. Once the 7525 is re-installed, please try printing. If you get the printer offline message, use the following document; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Please let me know if this resolves the issues, and or is you require further assistance. If you still get the tray app error, please let me know which printer you had before that you recently uninstalled. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Photosmart C4580 won't print - push a button on printer it shuts down

    The Photosmart C4580 has been reluctant lately to print anything at all. The documents sit in the spooler but won't print.
    I've searched for this problem here and haven't seen same printer, same issue and solution, so here goes...
    Dell Dimension 3000
    Win XP Pro Service Pack 3
    I've had this printer since February 2009.  I've set it up on the USB port.
    Three weeks ago I upgraded the memory from twin 256 module setup to twin 512 using Dell products. Obviously, I took the PC apart, cleaned the dust bunnies, installed the memory and everything worked great after rebooting - including the printer.
    About two weeks ago a carriage jam error popped up. It wasn't jammed but I pulled the ink, reset them and restarted the printer. It worked fine - no noises, no jams, nothing.
    Yesterday the printer quit printing at all. It said documents are printing but they just sat in the queue. I've done:
    1. HP Solution Center guided solution
    (when it asks to hit the Cancel Button and Start Copy Color buttons to print Self Test, the printer shuts down every time)
    2. Windows troubleshooter
    3. The HP Support solution online
    4. Reinstalled printer using original CD
    5. Reinstalled using the latest install software from HP online.
    *After the latest reinstall, where the program asks you to print a test photo page, it did not print. HOWEVER, after I shut down and restarted the printer, that photo printed! But I can't print anything else since.
    Thanks for any help you may be able to provide.
    Message Edited by azchurch on 11-21-2009 10:24 AM
    Message Edited by azchurch on 11-21-2009 11:20 AM
    Message Edited by azchurch on 11-21-2009 12:02 PM
    Message Edited by azchurch on 11-21-2009 12:08 PM
    Message Edited by azchurch on 11-21-2009 06:33 PM

    Okay I can print one document at a time if I:
    send it to print
    shut down the printer
    wait a minute
    restart printer

Maybe you are looking for