HP Photosmart 2610 scanner not recognized by Mac OSX Mavericks 10.9.2

Is there a problem with the current HP printer/scanner driver for Mavericks?
I have performed software update and when I go to "Printers and Scanners", Mac recognises the printer but when I click the "Open scanner", the scanning window opens but I get an error message saying it can't find the device. I can't even get Preview or Image Capture to recognise the scanner.
Thanks!
This question was solved.
View Solution.

Hi,
Try rebooting your Mac, then try scanning from Image Capture again.
If the same persists, try installing the following package and check if that may help:
http://support.apple.com/kb/dl907
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HP Photosmart scanner not recognized with IMAC OSX 10.9.3

    after updating to Maverick osx 10.9.3 my hp photosmart scanner is not recognized with IMAC image capture. I have done all software upgrades and deleted the printer and reinstalled the printer which is on my wireless network.

    Do these HP docs help?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Have-updated-to-maverick- no-drivers-for-printer-or-scanner/td-p/3061957
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&cc=us&dlc=en&lc=en

  • Photosmart B110 is not recognized bij MAC (10.8.5), allthoug printer is plugged in with USB

    Hi,
    While setting up my E-Printer, my mac sees the printer via USB.
    Coming to the point to configure the 'E'part, thus making the printer ready for wireless connevtion/printing, my mac asks to connect the printer via USB (but it allready is connected....??
    Can anybody help me??
    Tenx.
    Geert-Jan

    Hello GJvT
    I understand your concerns with your Photosmart B110 printer. I noticed you have performed some necessary troubleshooting steps.
    If you are experiencing issues during the installation via wireless, then please follow this HP document on The Printer is Not Found During Wireless Network Installation. Here is another HP document to reference Wireless Printer Installation Troubleshooting.
    If you have already installed this printer over a wireless network and you are unable to print, then please follow this HP document on Printer Offline. Please select your correct Operating System.
    If these steps don't resolve your issue, please let me know and I will continue to assist you further. Also if I didn't cover what you are stating in this post, then please let me know.
    Look forward to hear from you.
    I worked on behalf of HP.

  • Wireless USB Device not recognized by Mac OSX

    Help! I just bought a Hawking Technology Wireless-G USB Adapter. I followed the directions carefully and installed the software from the CD, then I inserted the adapter into the USB port on my Mac, and... nothing happened! According to the directions, a window was supposed to pop up after going to (System Preferences --> Network) saying that another device has been recognized. It's like my USB ports have been disabled or something. Unfortunately, I don't have any other Mac-compatible computer stuff that plugs into USB ports, so I don't know if the problem is my computer or if the problem is the Wireless adapter. What can I do?

    Wow... Mac OS X 10.3 technically is not even supported on that old PowerBook, if it's a "Powerbook G3 Series" (aka Wallstreet).
    Actually, it's strange that it is called a +Powerbook G3 Series+ because that model only went up to 300 MHz speed. Does it have a built-in USB port?
    My guess for why it doesn't work is because that wireless product may need to have USB 2.0 ports. If your PowerBook as USB ports built-in, they are USB 1.1 ports.

  • Canon pixma mp500 scanner not working with mac osx 10.6.8

    I'm having difficulty using my scanner. I've updated the Canon driver with the most recent version. It recoginises the printer/scanner but won't import image. Has anyone had a similar issue and successfully resolved it?

    duncan, I've got an MX 880 series all in one printer, and have the same issue.  A work around that I use is to select "e-mail" the scanned item. The scanned item is then inserted into an e-mail format where I can choose to download/save the scanned document into whatever folder I want.  This was the only expedient method I could find.  The Canon software capability between some of their newer printers and Mac operating systems is not totally compatible. For example, sometimes the top half of a line of text gets printed on one page, and the bottom half of the line gets printed on the ensuing page.  Doesn't happen often, but it is annoying.
    Wuz

  • Projector not recognized in Mac OSX 10.6.7

    Hi,
    I am using the new Mac OS X 10.6.7 Intel i7 (quad core); I noticed that the Director projector that I created using Director MX 2004 on an earlier computer,
    is not being recognized on this new computer (when I copied the folder from the External HD) onto the computer. Is asked for "Rosetta" that was successfully installed but again the "index.osx" file is recognized as a unix file. I do not have Director installed on my new computer, however, it should
    have played the projector at least. Kindly advise.

    Chances are highly likely that you have lost the resource fork of the executable file when you copied it to the external drive.  If it was not formatted as HFS, then it would probably not copy the resource fork.  This is a notorious problem.
    If you have another copy of that file that still works on a different mac, then zip it.  Then copy the zip to your "problem" mac.  Unzip it there, and it should work.  If you try to copy it to a non-HFS drive (or even if you are using a Non-Mac OS to do the copy), then it will only work if the file is zipped (or archived in some way).
    If you do not have a working version of the executable, then you would need to republish it from source in Director.

  • IPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Frustration Station.

    iPhone 4 (iOS 7.1.1) not recognized by iTunes 11.1.5 on Mac OSX Mavericks. Have tried all of the recommendations on the apple support site, I am running all current up to date versions of iTunes(11.1.5), Mac OSX(Mavericks), AND iOS 7.1.1 on my iPhone 4 and nothing has worked. Also tried doing some recommendation of deleting some ".plist" files in the preferences as I had seen on this support forum and my iPhone is still not recognized in iTunes at all. I plug my iPhone into my MacBook Pro and it makes the sound like it's connected and charging, but when I go "devices" in iTunes, it is all greyed out. I have had this iPhone since May 2011 and have synced it to this computer numerous times since then, with the last time being before I updated to Mavericks which was sometime in April. Not sure where to go from here, I've tried to delete iTunes and re-install, but when I try to drag the iTunes icon from "applcations", the system tells me I cannot do so as it is required by OSX. So, what gives?

    durrrrr. nevermind. re-installed itunes and it looks good for now.

  • 2nd generation shuffle won't take charge, not recognized by mac pro.

    2nd generation shuffle won't take charge, is not recognized by mac pro. light will not go on

    Hi nickh2913,
    If you are having issues with your 2nd Gen iPod Shuffle, you may want to try the steps in the following Troubleshooting Assistant:
    Apple Support: iPod shuffle (2nd generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/shuffle2gen/
    Regards,
    - Brenden

  • Officejet 150 mobile scanner not recognized

    Win 8.1 desktop connected by usb to officejet 150 mobile printer/scanner
    Installed using latest driver install package from HP.  Install completes with no errors.  Printer works normally
    HP scan fails.  Gives error box saying scanner not recognized -  attempted uninstall and reinstall
    Used utility from HP to do complete removal did not fix.  Ran HP diagnostic which says driver not recognizing scanner and to contact support.
    Need help

    Hi @lutzro 
    I understand you are having problems scanning despite the troubleshooting your best efforts. I'm sorry to hear that, but will certainly do all I can to help out
    Although you have already uninstalled and reinstalled, I suggest trying a more comprehensive uninstall. Please complete the following steps and let me know the outcome;
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > OJ150ML511_Full_14_en.exe
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
    Download and run the HP Printer Install Wizard for Windows
    Type services.msc and press Enter
    Locate Print Spooler and double click on it to open the Spooler properites 
    Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
    Under Service status, please Stop the server, and then wait a moment and click Start
    Deleting the printer from Printer Server Properties
    1. Open the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
     Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
     3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Keep me posted, I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My iphone is not recognizing my mac through bluetooth

    bluetooth is on and my mac recognizes my iphone but my iphone is not recognizing my mac. i want to send some pictures from my computer to my iphone through bluetooth. my other computer is my main computer for my iphone, and this one has some photos i want on it.
    YES MY COMPUTERS BLUTOOTH IS "DISCOVERABLE."

    At this time Bluetooth on iPhone does not support file transfer. Bluetooth on the iPhone as only for Bluetooth headsets at this time.
    If you feel this is a feature or suggestion that Apple needs to know about and or your interested in. Please go to http://www.apple.com/feedback/iphone.html

  • HT2518 pc not recognizing my mac

    My PC is not recognizing my MAC when I use Migration Assistant.  It just sits there and searches.  Anyone know a fix for this?

    i got it! i restored my ipod!!! haha... alright..
    thanks anyways!
    congrats-how did you restore if pc does not recognize ipod?

  • Itunes is not compatible with mac osx 10.5.8

    latest itunes not compatible with mac osx 10.5.8. How do I resolve this?

    You need Snow Leopard at least.
    MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. 

  • It will not run on Mac OSX 10.5.8, on a G% dual 2.0ghz, now my older version of Firefox is gone...

    I downloaded Firefox 4.0 and It will not run on Mac OSX 10.5.8, on a Mac G5 dual 2.0ghz. Now my older version of Firefox is gone...Why won't it work, the download page says it is for OSX and does not say it will not work on any particular OSX. Can your clarify. And can I get the old Firefox 3 back or should I continue using Safari....?

    Yes I've read every one of them, none of them provide solutions whatsoever, I have spent about ten hours on this site in the past two days to no avail, none of the "resolved" threads provided any sort of solution for me, I have tried everything suggested on this website so far, multiple times, to no avail.

  • Cisco Connect does not run with Mac OSX Mountain Lion (10.8.2)

    When I first installed Cisco Connect that came with my E1500 router, I was running Mac OSX Snow Leopard (10.7) and it worked fine.  I upgraded my OSX to Mountain Lion and now when I start Cisco Connect, I get:
    Unsupported operating system
    The router software supports these operating systems:
    - Mac OS X 10.5.8 or later
    - Mac OS X 10.6.1 or later
    - Mac OS X 10.7 or later
    I saw some other thread/info/download on Cisco Connect with Lion (10.7) but nothing for Moutain Lion (10.8) - is there a fix forthcoming?
    Thanks
    Gary

    All i want to do is disable the guest function through cisco. i live in an apartment and everyone logs into my guest account. i was at my neighbours and they were laughing saying they done need to subscribe for the internet cause they just log onto local wi fi. and mine is one of them. i dont know if that'll slow down my internet with so many people using it. but all i want to do is just avoid it all together and get rid of it. but in this case i am having the same problem as all of you. to disable the guest function you need to go through cisco connect and it is not compatible with mac osx mountain lion. grrrrrrr

  • Icloud keychain setup does not terminate during mac oxs mavericks update

    The icloud keychain setup does not terminate (in order for the install to continue) during a mac OSX maverick update from 10.8.something. Any idea?

    I found the solution!
    Open Calendar on your Mac.
    In the left column list of calendars, right click on the calendar in question and "Get Info"
    Check the box labeled "Ignore alerts"
    Hit "OK"

Maybe you are looking for