HP Photosmart 3310 - Scanner not working over Bonjour since 2.1 update

My HP3310 is connected to my Time Capsule via Ethernet to allow it to be used by my iMac and a Macbook.
After I updated to OSX 10.6 I had a few problems but eventually I was able to get my 3310 working as a printer and a scanner with both Macs connected as described.
This last weekend following installation of the HP printer Driver 2.1 update, the scanner no longer works as connected. I just get the message "failed to open scanner". I tried removing the device and re-installing as described throughout the various threads but nothing works. If I connect the 3310 via USB to my iMac or Macbook then the scanner works but not on the Time Capsule with Bonjour. This has only happened since the 2.1 update was applied which was preceded by the OSX 10.6.1 update.
Anyone with a similar problem that they fixed? If so how did you fix it?

All,
First off, the HP Photosmart 3310 is supported in Snow Leopard with the In-OS scanning solution. This allows you to scan through Preview, Image Capture, the Print & Fax control panel, and your printer browser. Some details are available on [this|http://support.apple.com/kb/HT3771] link (and hopefully the scan document linked to within this page will go live again soon), other information is on [this|http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&lc=en&dlc=e n&cc=us&lang=en&os=219&product=439491] link.
Second, HP Scan Pro and HP Device Manager are NOT supported under Snow Leopard. Do not install the full solution under Snow Leopard, and if you have, I'd suggest deleting these two items. A full solution installer for the Photosmart 3310 that will include HP Scan (scan software compatible with Snow Leopard) should be available later in October.
Just trying to help.
Andrew

Similar Messages

  • Lexmark P6250 scanner not working with iMac after recent software update, any ideas?

    The scanner has always worked with the iMac but after a recent software update only the printer works now.  I have searched the apple communities boards and have downloaded a variety of drivers suggested but nothing has solved the issue.
    When I load print and scan from system preferences, I select to open the scanner and the process just hangs.   I can see the scanner and am able to select to open but not able to scan.
    Any ideas on how to resolve?

    Unfortunately I have tried this and I have downloaded new drivers and restarted both the iMac and printer/scanner numerous times but I still only have the printer working.
    I have tried to use preview via system preferences, print and scan and the when I select open scanner for preview the application hangs.  I have also tried to use image capture and there is an error when selecting the scanner device of "Lexmark Language Error".  When selecting overview within image capture I am advised that the size tryng to be scanned is too large when nothing has been selected and the default setting are standard size and then image capture hangs.
    All features were working fine prior to conducting a software update about 8-10 weeks ago.  I have downloaded further software updates which I had hoped would sort this issue but it hasn't.

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • HP Laserjet 3052 Scanner not working

    So I upgraded to Leopard and everything seems fine except I cannot run the HP Scan software. The printer [art still works but I just cannot scan. I have tried reinstalling the software but it still not working. HP have no new software and drivers for it yet.
    Anyone any ideas?
    Thanks,

    I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
    After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
    He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
    Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

  • HP Printer F4180- Scanner not working

    I've installed Snow Leopard, but now its now letting me scan. It will print documents, but when I click 'scan' it says 'scanner not found'. I thought this update was supposed to make using my printer easier!!! Can anyone tell me how to sort this out? I depend on this scanner to create work and this is frustrating to say the least!
    Thanks,
    T SCOTT

    I can confirm what everybody else in this thread has said and add one detail. I bought an HP 3055 all-in-one yesterday and after installing the software, not only wouldn't it scan ("waiting for PC..." forever) but it also wouldn't print, AND another HP printer elsewhere on my network STOPPED working.
    After an hour on the phone with HP support (10 minutes just to register my info), the guy confirmed that there is no 10.5 driver, didn't know when there would be one, and added the following amazing fact. Not only does the software on the CD that comes with the printer/scanner not work with 10.5, it actually BREAKS its printing from Leopard (and similarly the 10.4 or earlier downloadable drivers from hp.com). He claimed that printing from 10.5 works on the 3055 out of the box, but if you are so reckless as to install the software that actually came with the printer, it permanently stops working. (Plus, apparently, stops the printing of other HP devices.)
    He went on to say the only fix was to re-install the Mac OS . However, I can report that after un-installing every piece of HP software on my machine (using their uninstallers, not just deleting), then restarting, the printer now works, and so does the other HP printer on the network. (Scanning still doesn't work.)
    Btw, echoing other complaints on this thread, the reason I bought a new HP scanner was because my old one had stopped working ever since (I think) 10.4, and I finally gave up.

  • Just upgraded my Cannon MP Navigator App for my multi-purpose printer/scanner not working correctlly

    After upgrading to Yosemite MP Navigator App for my Cannon scanner not working properly, Buttons are not active and do not respond .... it works on my laptop with Mavericks ... I will be reverting back to Mavericks .. I use my Scanner a lot . Apple please fix this problem.

    I have the same problem with a Canon MP530 under Yosemite. I'm not sure why Canon can't get their act together to have updated drivers and software. Very aggravating.
    I can confirm that pmt513's workaround works. That's fine for single pages. But what about batch scanning?
    Here's another partial workaround. The main MP Navigator interface still allows you to do the scanning, both single pages and batches. You just can't save, send, or export those scans. But the temporary files are on your disk in TIF format. If you don't mind taking those and converting them to PDF or JPG (which you can do in Preview), then just look in the following folder to the files:
    ~/Library/Caches/Temporaryitems/MP Navigator 2.2/SCN_MFP
    I have put an alias to it on my desktop so that I can easily access the scans. Be sure to copy the TIF files out before you close (and thus clear) the MP Navigator window as that also clears the files from that cache folder.
    I hope this helps some of you.

  • With HP update for Maverick my photosmart C309A does not work properly

    After the HP-update for Maverick my printer HP Photosmart C309A does not work correctly. The scan facility is gone and the printer "hangs" after one print. I had to reset the printer software from a backup and to disable the automatic installation facility on my IMac. Shortly, very very very nasty. I hope this is the way for Apple to change this update into a good one. There is no other way to communicate with Apple then through the Community. I wander if Yosemite gives the same problems with printers.

    You are welcome.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Some people have solved this by restoring their previous driver from their backup.

  • My printer is out of Black Ink .... why does my Scanner Not Work anymore?

    My printer is out of Black Ink .... why does my Scanner Not Work anymore?

    Hello Londen.
    The community is eager to assist! To ensure the most accurate information is provided, we’ll need to know the model of the printer you are using. We look forward to hearing back from you!

  • Facebook App not working over 3G, but works over Wi-Fi.

    I have a BlackBerry® Curve™ 3G 9330 Social Messaging Ready smartphone. My current software version is 6.0 Bundle 2333. My Facebook application worked perfectly fine when I got the phone a few months ago over the Verizon 3G network and Wi-Fi, but when I recently updated Facebook to version 2.0.0.58, it does not work over 3G anymore. But everytime I try to connect via 3G it says "We cannot reach the Facebook server at this time. Please try again later. (100)" It does however still work over Wi-Fi.
    I have tried various attempts to fix it: uninstalling the App and re-installing it and also removing the battery and putting it back in (hard reset), but nothing has worked.
    Is anyone else have this same issue? Is there a way to restore my Blackberry to its factory settings so that I can just use the older version of the Facebook App [that was previously installed]?
    Thank you.

    Hey metalhourse90,
    I can see from your PIN that you currently don't have browsing services included in your data plan. I would advise contacting your wireless provider to have this enabled.
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • IMessage is not working over wifi. I need HELP D:

    My iMessage is not working over wifi. But it's only at my house. Actually it worked a while ago but then it stopped working.
    The browser, email, app store, youtube and any other apps are working just fine over the wifi. It's only my iMessage. It won't send any message. It say message not delivered. Does anybody what is going on and what can I do to fix it? Thanks, before. (:

    I recently moved my library on my time capsule
    You mean you moved your music files to the external. The library is more than the music files.
    Just copy the \Music\iTunes\ folder from internal to the Time Capsule.
    Add the Time Capsule to your Login items in System prefs -> Accounts.
    Hold Option and launch iTunes and select *Choose library*.
    Select the iTunes library file int ehiTunes folder on the Time Capsule.
    It is hte samae library you have previously. All artwork playlists, ratings, songs, movies, etc. will be there.
    Genius is already there so nothing needs to be done.

  • My HP Photosmart c309a will not work.  I just had a new hard drive installed on my computer

    My HP Photosmart c309a will not work.  I just had a new hard drive installed on my computer

    Please download the driver from the HP website (that matches your operating system).

  • BBM not working over mobile network

    BBM on Q10 not working over mobile network.
    Working only via wifi.
    Carrier: KSA STC
    OS: Official 10.2.1.2102
    Please help.
    Its very disappointing that bbm is not working on bb.

    Can you try sending a BBM friend a PIN message, not in BBM, but in your Compose Message > PIN.
    You will need that contact's BBM PIN number...
    Do you see the message sent, and does it hae a D beside or R afterwards?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Port Forwarding not working after 7.7.1 Firmware update

    I bought the new 6th generation Airport Extreme today, and after I set it up, everything worked great.  I have a VoIP phone that needs to have traffic on port 5060 forwarded to it, and that worked just fine as well. 
    However, I then updated to the 7.7.1 firmware, and the port forwarding stopped working.  I tried a hard reset of the Airport and re-entered all the settings, but it still didn't work.  I spent about 30 minutes on the phone with 2 Apple support people who tried hard, but couldn't help.  They also couldn't find a way to download the 7.7 firmware, so there was no way to downgrade.  They suggested I go back to the store and exchange it for another one, which I did, and now it all works again.
    Has anyone else had issues with port forwarding on 7.7.1?  I'm just wondering how I'll ever be able to update the firmware, since failure means having to get a new Airport.

    Huh,
    turns out the problem went away with another restart of the Mac Mini. I'm still uneasy about it though, as I do not understand how it went from working to not-working over night in the first place. But, at least for now, the problem seems gone.
    Thanks for commenting.
    Cheers
                Niels Olof

  • My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1and it was not jillbreak or hacked to unlock. I need help, what can I do?

    My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1
    my phone was not jillbreak or hacked to unlock. i need help, what can I do?

    Did you do the Reset Network Settings as I described above?
    There is no way to go back. You can try reseating your nanoSIM or replacing it. Or call your cell provider and have them check the provisioning on your phone.
    Or Restore your iPhone from your backup in iTunes.

  • My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !! It was working fine on ios 8.1.1 i need help, what can I do?

    My cellular network is not working on my iphone 5 after updating to ios 8.1.2 !!
    It was working fine on ios 8.1.1 i need help, what can I do?

    I have this problem too - and it is on a BRAND new iPhone 6 - I have definitively tracked the issue to the moment I upgraded to iOS 8.1.2 - and am beyond frustrated. No fix to tell you about, sorry…but you can read my post here if you are into the whole "misery loves company" thing: iOS 8.1.2 Cellular data problem (Definitive - maybe)

Maybe you are looking for