Hp photosmart 335

I have an HP photosmart 335compact and everytime i have tried to print it just continuously says 'processing' I let it go on about an hour just to see if it was lagging to print but never changed
I also keep having problems with it saying the ink cartridge is not in there and it is, snapped in like its supposed to be, then tells me its jammed. Im constantly back and forth between both problems. Help!!!!

Hello mommyof12009,
Welcome to the HP Forums.
Typically when a printer hangs or freezes, it is usually because it is due to a lack of power.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

HP Photosmart 335 printer.

Why do I get card error message when using SD card from Canon Powershot camera, when no problem with card from Nikon Coolpix
Different card manufacturers or card reformat makes no difference.
BJK

bjk3677 wrote: Why do I get card error message when using SD card from Canon Powershot camera, when no problem with card from Nikon Coolpix Different card manufacturers or card reformat makes no difference. BJK
Hello bjk3677, While there is a possibility that you may have a hardware fault, I would suggest downloading and intalling the software/drivers for your printer just to rule out that the issue may be caused by a software issue.
The drivers can be found Here . Since you didn't mention the version of your operating system, you can select the version you require from the list available.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

HP Photosmart 335 print distortion on using Image Zone Express

Using HP Image Zone Express (the packaged software):
When I select a photo to print in the VIEW area I see a correctly proportioned picture.
When I press the PRINT tab the photo appears on the PRINT screen but it does not (and noticeably so) have the same print proportions as on the previous screen. The picture's length (height) increases in proportion to its width by an amount that makes a face in the picture appear thinner than it really is, .
This would not normally be a problem except that when I print the picture, the resulting print also shows these wrong proportions!
When I use Photoshop to print via this printer, the proportions are correct but the print quality is inferior.
Among the actions I have performed to try and solve this problem are:
I have checked and found that my printer drivers are up-to-date.
I have tried putting all settings back to their defaults.
I have restarted the printer, the software and the computer (I have not re-installed anything).
I have tried printing smaller images than the paper size (10x15cm) with the same result. Strangely, when I do this, the printer tells me that the image is larger than the paper and some cropping will occur!
An additional defect that possibly has nothing to do with the "proportions" problem is: The print "centering" (on the page) function does not seem to work at all.
Any ideas or help with this proportions problem would be greatly appreciated.

Hi Mel, yea if you've tried all the usual troubleshooting then it could be worth checking you have the latest SW & driver
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3396080&cc=ie&dlc=en&lc=en&product=33960...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Photosmart 335 - opens when I switch on my PC

The HP Digital imaging monitor opens when my computer is turned on. I cannot disable this by the usual methods or turn the software off.

Hello Wanderer-1958,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are looking to disable the HP Digital Imaging Monitor. If you are running a Windows operaing system, please follow the steps below.
Click Start, Run (or type in the search field) msconfig.
Check under the Services tab and look disable the "HPQTRA08.EXE" which is the DIM.
I hope that works,
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

B8850's new ink system fails to print bold blacks!

I just came from the three ink system of the 8750 Photosmart Printer using Matte HP Premium Plus Photo Papers and my blacks were deep and bold. Using the same paper and trying numerous variations of print settings, I simply can not attain the same blacks!
I haven't found any reviews which point this unnaceptability out so I hoped to be the first to warn potential buyers that the B8850 is a second rate product.
If someone has a secret formula, perhaps, for obtaining the exact results gotten with the 8750 and it's ink system, I would love to become enlightened!
Best.

I can't help with your ink problems, but
I have a Photosmart 335 Photo Printer and live in NZ. I want to buy some Premium Plus Photo Paper 6x4, and I haven't found anyone in this "neck of the woods" who supplies this paper. Can anyone help? Pat

When i turn printer on light next to power button turns orange and a code 07a74dd6 pops up on screen

Have an HP Photosmart 335 bottom has Q6377L on door

Are you able to use the printer with this error message or are you stuck on this screen ?
Also did you make any ink cartridge changes lately ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Changing Default Print Quality for Photosmart Printers in Stand Alone mode

Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
I am using the following Photosmart Printers: A516, A512v and the 335.
As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
Thank you so very much in advance.
BLAYZE!

Hello:
One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
Barry

Hp aio remote app on iPhone won't scan to my hp photosmart 7515

hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my network

Hello @mbranch37,
Welcome to the HP forums.
I understand that you are having a problem with the AIO app, as well as what sounds like a web services issue.
I would like to help.
Before working with the app, I would like to make sure the printer is fine.
On the front panel of your printer touch the Web Services icon. (also known as the ePrint button)
If you get a server connection error, I would set a manual DNS.
The following post by happytohelp01, has instructions for setting the manual DNS.
If for some reason the printers email or ePrint address has changed, you will have to set it up again.
If the email is the same and you do not get any error messages, try cycling your network.
Turn off the printer and other network devices.
Unplug the power to your router for at least a minute.
Plug the power cord back into the router.
Turn on all your network devices.
Wait until the blue wireless light on your printer stops blinking.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
Wireless on PASS
Wireless working FAIL
and everything following that stated as 'not run'.
Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
So the question is, is this a hardware fault, and if so what can be done about it?

Hello,
Yes, it is an hardware issue and indicates that the Wireless card is not functional.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart Premium All in One Blue screen error B882B1C4

I have recently purchased a Photosmart Premium All in One C309G machine which is connected via a USB cable to the PC. When I try to use it wirelessly it produces a blue screen with an error message B882B1C4 as soon as I switch on the BT hub. HP haven't been able to sort out the problem as I am now in receipt of the 4th replacement . Can anyone suggest a solution please? I have a BT1800HG wireless hub connected with an ethernet cable to my HP PC.

This is posted in your separate thread:
Hey there. I would try a power reset to fix the issue.
Press the Power button ( ) to turn off the product.
NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the back of the product.
Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
Connect the power cord to the electrical outlet.
Connect the power cord to the back of the product.
Press the Power button ( ) to turn on the product.
If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp photosmart plus driver no longer working

Hi all I have a photosmart plus came with an hp computer bundle used to work. Now every time I go to try and make it work the following happens while installing the driver.
a the driver installatiion stops/never completes
b the driver installation can not see the wireless network or the printer when i plug in the usb cable, even though the computer sees the printer through the usb port and I can print through the usb port.
This is on 2 computers the same crap I have no idea what to do. I can not get the drivers to install and the only way I can print is by physically plugging the printer to a computer via usb and letting windows find it.
Please help this is a giant pain in the ass.
Fattyz

Sorry, I should have asked this earlier, what version of Windows are you using?
Since I don't want to waste too much more of your time with you waiting for me to reply, I will go ahead and give you two links of troubleshooting steps that I would recommend trying.
The Progress Bar on the Software Installation Stops or Stalls
'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer in Windows Du...
The first one addresses the issue of the software not completing. The second, even though the title might not seem like an issue that you are having, addresses the issue of the printer not being recognized by USB.
Try those and let me know if either of them work. If they don't, get back to me with your version of Windows and I will see if I can find anything else to help you resolve your issue.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IMac printing problem with HP Photosmart 7150

I've just bought a 27 inch iMac and I'm having problems printing out of iPhoto 9. I select for eg, 4 X photos per page and it prints about 10% of the page before spitting it out. I've downloaded the latest driver for my HP Photosmart 7150 printer (Gutenprint v5.2.5) but still no good.
The print monitor window always says it is printing Page 1 7%. Weird.
Any ideas?? Thanks in advance.
Dan

I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
I am only able to print in draft mode which is not suitable for anything I need to do.
I realize this printer is no longer officially supported, but any help would be appreciated!
Thanks,
Mike.

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Printing problem with hp photosmart 8180

The printer dont print in plack, although the cartridge is new.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp photosmart 335

Similar Messages

Maybe you are looking for