HP Photosmart 5514 e-All-in-O​ne Printer - B111h (Default Printer)

Trying to print a medicine list from "Documents"; printer makes lots of noise before trying to print and when it comes out of the printer, it's only a partial list. I printed something the other day and everything was fine. I've tried to pinpoint the problem and can't find a solution. I've not used it that much and I've only had it a few months. Does anyone have any ideas as to what has happened?

Hello educate89,
Please perform the below steps ....
Power Off the Printer .
Unplug the Power cord from back of the printer .
Wait for 30 seconds, then Plug in the Power cord and Power On the Printer.
Touch on the Right Arrow and select "SETUP".
Then touch on Tools.
Then touch on Clean Printhead
Now try printing , it should work.
Note : You may have  to perform step 6 for 2 times if issue still persists.
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

  • Hp photosmart wireless e-all-in-o​ne b 110 series printer on main screen says ink system failure

      hp photosmart wireless e-all-in-one b 110 series printer on main screen says ink system failure

    Hi,
    In order to troubleshoot the problem. please follow the steps listed under '0xc19a0013' or no code displays with the 'Ink System Failure' error message below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458034&cc=us&dlc=en&lc=en&product=4022343&tmp​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP PhotoSmart C6380 will only print to default printer in Outlook

    Hello,
    I hope you can help me figure this out.  We recently purchased a HP PhotoSmart C6380 for an employee here and we have encountered a strange problem.  If the printer is selected as default, then regardless of what printer we choose in Outlook only we can only print to that printer.  The last printer she had did not do this and it was an HP as well (although I can't remember the model).  Both printers were set up as network printers.  The difference is that on the previous printer we set it up by created a TCP/IP port and sharing that out to others.  This printer had a network option upon install, so I did it that way.
    Anyone that is sharing this printer has the same problem.  If they want to print out any e-mail (does not matter if there are attachments) it will only go to this HP printer regardless.  We are using Office 2007 and I have done my research on it as well, and I can't find a common thread, since the last printer was also used to print within it, but had no problems choosing other printers.
    The only thing I can come up with is the way I installed this printer.  We just had a network cable attached to it and had the software search for it and set it up in that fashion.  Again, I don't think it's Outlook 2007 because it only occurs with this particular printer, albeit only in that application.
    Has anyone ever seen anything like this?
    Thanks,
    mtaffer

    Hi SportBilly15,
    Welcome to the HP Support forums.   I understand that your Photosmart 6510 is not printing black ink correctly.
    I have included the Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems document. It will take you through several trouble shooting steps to correct the issue. 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Photosmart 5514 e-All-in-O​ne Printer - B111h not responding to print requests on Windows 8

    Hello there,
    Recently, I've been having these problems where the Printer is not responding for my requests to print on my HP Windows 8 Laptop for a PDF File. I had a message where it said that "Printer is in error state" but didn't get that message after I tried printing again. Now my printer is not responding to any print requests though the touch screen still works and is saying that the wireless is still working. If anyone could help me that would be great!
    Thank you for your time. 

    I see that you are having a problem printing from Windows 8. 
    See if you can print a self-test page or Printer status report from the printer itself. This will test the hardware functionality for the printer. If it does print, then it's a connection issue. If it does not print out, then we will need to try to deal with the hardware problems of the printer. 
    Run the print and scan doctor and check the results. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&dlc=en&docname=c03275041
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Trouble printing with HP Photosmart 6520 e-All-in-o​ne while on Mac

    Hi!
    I just successfully registered and connected via WiFi to my new HP Photosmart 6520 e-All-in-one pritner. I even printed the alignment and test page successfully.
    When I tried to print documents in Word, Adobe PDF, and TextEdit, the same result occurs each time. The first page that prints has text regarding my Mac such as:
    %!PS-Adobe-3.0
            %APL_DSC_Encoding: UTF8
                                 %APLProducer: (Version 10.8.2 (Build 12C60)
    And then many many many blank pages start printing after that. WHAT GIVES!?!
    I am using a MacBook Pro with OSX Version 10.8.2 and have tried restarting both my printer and computer several times without success. Any help with this would be much appreciated!
    This question was solved.
    View Solution.

    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart 5514 all-in-one printer. Control copy function from computer?

    I have a HP Photosmart 5514 whose touch screen is no longer working properly.  It doesn't recognize any selection at the bottom right of the screen.  I can touch any other place on the screen and it will respond.  Because of this I'm no longer able to copy or scan from the printer.  I can print from my computer as this doesn't involve using the touchscreen on the printer.  What I'm wondering is if it is possible to use my computer to control copying.  Is it possible to use the computer (rather than the touch screeen on the printer) to tell the printer to copy?

    Hello Junior2,
    Welcome to the HP Forums.
    I see that you are having an issue with the touch screen not responding.
    One step that you can try is to please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If this does not resolve the issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    As for controlling the printer from the computer, the only thing that you will be able to do is print or use the scanning software to scan to the computer. 
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Print black and white only, on Hp photosmart 5514.

    Hi,
    I dont like it at all that i have to contact support forums for something like this.
    it use to be so easy to choose color or black and white printing.
    Why have you made it so difficult ? Totally pisses me off but i leave that for the feedback section.
    I have seen others with the same problem so it is not only me. now it has taken more than 20 minutes and i have to get to work soon.
    So, how do I print black and white (or greyscale) using my newly bought hp photosmart 5514 ? ( is it smart ???)
    I have been wasting a lot of ink now, very unsmooth not having it available in the ordinary printing window.
    Like it matters, i use win 7 blablabla

    I also hate that there is NO WHERE to find a simple answer.  I have a "HUGE" XL cartridge of black only.  Then I have to buy all the stupid little tiny color cartridges AND another little black cartridge.
    Here I suppose: when I print in color, I use the color + small black cartridge.
    When I want to print BLACK ONLY or GRAYSCALE, I choose that and it only prints using the XL big black cartridge.
    WRONG.  And no one can seem to answer this correctly, t but I know it does not work.
    Remove 1 empty color cartridge whole printer won't work, even if I want black print only.
    If all the small "color" cartridges + small blk cartridge is low but the BIG BLACK cartridge is showing full, still won't print BLACK ONLY.
    I cannot PRINT with this stupid printer unless all cartridges have ink and are inserted.  STUPID
    I am now late to work simply because I cannot print a document PERIOD unless I have full color sitting there.
    I just tried it multiple ways, grayscale, black only blah blah and it ALWAYS came out too- light, ie the sm blk cartridge was being used and it is admittedly LOW ON INK.  WHAT is the big black cartridge doing there, saying it is full and not printing "black only" or "grayscale"? 
    The only article I could find that halfway enlioghtened me to the problem was HP page stating that "black"  is never really black, to improve quality (thanks for making the decision for me) HP adds just a bit of color here and there to make black really black for paper quality paper.
    SO SNARLING.  Going to *bay to get refilled cartridges so I can print in a week.  SNARL

  • Black ink cartridge will not work even though new; photosmart 5520 e-all-in-one series

    My printer suddenly stopped printing properly.  The black ink is no longer printing.  I changed the cartridge, thinking it might be defective.  I have cleaned the printheads several time, reset the cartridges etc.  and the ink still does not come out in the print quality diagnostic nor in documents that I need to print.  The printer is 2 years old.  Is there any other things  I could do to get it to work, before I go and buy a new printer????
    Any suggestions would be appreciated.

    Hi L_C54,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print in black ink after replacing the cartridge.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in?
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp photosmart 5514 duplex grayed out

    Why is the duplex option of my photosmart 5514 always grayed out?
    I just added a photosmart 5514 which officially has a duplex (of course, manual) option. But when selecting the print, choosing layout, the duplex option is always grayed out. No matter which application (word, safari, iphoto...)
    In the system settings, under options, it shows driver version 1.0. But I just updated the driver from the hp support page and it still shows 1.0.
    The driver update was a pain. It forced me to create a new printer, although I just wanted to update the driver. An I installed all available sw packages, to include all features.
    I've also checked the firmware on the printer itself. Checked for updates but is up to date.
    Any help?

    Hi frasses,
    The Duplex option expected to be grayed as this option only applicable for Automatic Duplex printing. Your device only support Manual duplex as I can understand by reading your notes, please clarify otherwise.
    Performing Manual Duplexing on Mac OS can be done by using the Pages to Print option as you may find listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01663233&cc=us&dlc=en&lc=en #N162
    Regards,
    Shlomi

  • My Hp Printer can print from my Imac But my printer can not see the Imac to scan Photosmart 5514

    My HP printer is a(photosmart5514) Imac can print to it, but the all-in one can not see my Imac to scan

    This has been a problem with HP for ages. HP's support forum is filled with this complaint, and no resolution appears evident.
    You can try assigning both the iMac and the HP Photosmart 5514 static IP addresses. This will ensure they will remain in the same "place" on your network. This may help.
    I recommend you abandon the attempt to initiate scanning from the scanner. Initiate the scan from your computer with HP's Image Zone software.

  • .HP Photosmart 5514 Will not print black

    I changed my black ink cartridge in my HP Photosmart 5514 (product number CQ183A, serial # {Private Information Removed}) and now it will not print black.  The colors work fine, just no black. I have cleaned the print heads, done the secondary clean, tried page allignment, I have turned it off and restared it.  I have plugged it into a new outlet, I cleaned the head of the cartridge and the printer. Nothing has worked.  Please help me.  The printer ran out of ink, I bought a new cartridge, I put it in, that is all I did to it.  I have a "genuine HP black ink cartridge 564".  It is not a refilled, refurbished, used, ect. ink, it's brand new.
    This question was solved.
    View Solution.

    Hi,
    Tried all the items in the "Solution" link, but no dice.  Will not print in black, will not copy in black, out of warranty, tried two new HP black cartridges, still no luck.  Have used 1/2 of my new color cartridges up in printhead cleaning.  Anyone have other ideas or a different path to success?

  • Photosmart 5514 prints blank on card stock

    I only get a blank page when I try to print on card stock. It feeds the card and sounds like it's printing but then comes out blank.  I've changed the print settings to 5.5" x 8" and to 'matte greeting card'. It prints fine on regular paper but when I try the same thing with a card it comes out blank.  I have just changed all the print cartridges.  I have tried printing from PowerPoint, from my mail, and from a jpeg file; and all work on regular paper but come out blank on the cards.  Any suggestions? I should also mention that I'm using a MacBook Pro computer with OSX 10.7.5 and connected to my printer wirelessly through my home wi-fi network. 

    Hi , Welcome to the HP Forums! I noticed that you cannot print on card stock with your HP Photosmart 5514 on Mac OS X 10.7, and I am happy to look into this for you!  According to your printer's specifications, this is an unsupported paper size for card stock paper. The supported sizes are as follows:  Card typeCard size3 x 5 in Index76.2 x 127 mm (3 x 5 in)4 x 6 in Index101.6 x 152 mm (4 x 6 in)5 x 8 in Index127 x 203.2 mm (5 x 8 in) You might be able to try a custom size print, and you could try this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5510 e-All-in-One Printer Series. But if it is printing on regular paper, then it must something wrong with the card stock paper that you are using.  Perhaps, also try taking out the paper and re-loading it might help, and maybe try flipping the paper upside down, in case the wrong side up is being loaded.  Otherwise, I would suggest to try one of the supported card sizes that I mentioned in the chart above.  Hope this information helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • I Have a HP Photosmart Premium Fax all in one  C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

    I Have a  printer HP Photosmart Premium Fax all in one  C309A,I can't save the scanned documents since upgrade to Max OSX10.9.2

    Did you install the latest drivers?
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3 737195&

  • PhotoSmart 6510 e All-IN-ONE Series HP Printer

    My HP Photosmart 6510 e-All- In -One printer suddenly stoped coping, and delivers blank pages.  When I print from my laptop the printer works but the quality is poor; printing faded out areas within the printed-out paper process.  I tries cleaning the Pringheads, but got no resolve to my issue.  Can anyone give advice on eliminating my problem?  

    When you replaced the printer cartridges did it clear up the problem?
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

    I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
    Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

    goestherain,
    I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for

  • Ipod touch not recognized in itunes windows

    Windows will not recognize my ipod touch. I have gone throught the Apple troubleshooting procedures and no luck.

  • Slow down after installing Lion OS

    My Macbook pro later than 2009 model slowed down after installing the new OS Lion any suggestions to speed it up

  • Design View Problems

    Hello, I have downloaded the Dreamweaver 8 and I'm in the process of taking some online tutorials to improve my almost non-existent skills. I must have changed something during my careless exploration on the application. The problems I am having all

  • Spanish advanced payments HR Portal

    Hello everybody! I'm looking for information about advanced payments (for Spain) for a HR Portal. I'm quite new in Portal and I don't have idea of HR... very good e anyway I have been checking some standard portal application to find this option whic

  • U00B7Re:SUPPORT ISSUSES

    hI ALL, I HAV SOME DOUBT I NTHESE SCENARIOS. CAN ANYBODY EXPLAIN ME THESE POINTS SCENARIO WISE.      Actively and regularly involved in Load Monitoring of Daily, weekly, and Monthly, Data Loads using Process Chains.      Involved in escalating priori