HP Photosmart 5520 printer not printing more than 4 pages at a time.

Hi,
I have just purchased this printer - stoked about the duplex printing to save of paper etc. . . .
However it prints maximum of 4 pages (word, pdf etc) at a time. Kind of pointless having a wireless printer where you have to sit by the printer anyway & have to reprint a document about a million time. And then sometimes it will print up to page 3 only, so wasting paper. Sometimes the printing stops mid page.
I wont even begin to talk about how I have tried to print a photo, 3/4 of a 6*4 is the maximum that will print.
Am kind of thinking its a waste of a $160.....NOT HAPPY.
I have tried installing and reinstalling to no avail. . . what else can I try?

Thanks for the advice,
I read through the document and NOT COMFORTABLE not having virus scanning software installed on my computer.
My two other printers work perfectly, however, lacking the wireless capability & duplexing and "printing from anywhere" I really want to move beyond them.
The only step I hadn't preformed was a system restore, which I will attempt now. However how do I ensure I have up to date firmware? I only have recently installed the printer using the website as recommended by the printer. . .
I struggle to think of how the printer has capability to print from "anywhere" it doesn't even tell you when connected that it fails at page x of x. . . . it just makes you think the whole thing is printed until you find on the printer it hasn't.
Sigh!

Similar Messages

Photosmart 5520 - Black not printing on some things

My 5520 has been fitted with new cartridges and all work except the black. Strangely, black (or at least grey) writing prints on the quality/print report and the cartridge shows as full when this is checked by the on screen request. However, the print report has a completely blank rectangle under the 'black' heading. I have followed all the usual steps but I am confused as to why I get black printing but no black on pictures.

HI , Welcome to the HP Support Forums! I understand that you're unable to print black on your HP Photosmart 5520 e-All-in-One Printer. I will certainly do my best to help you. I would try the steps within this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5520 and Deskjet Ink Advantage 5520 e-All-in-One Printer Series. Solution one: Use genuine HP ink cartridges HP recommends that you use genuine HP ink cartridges. HP cannot guarantee the quality or reliability of non-HP ink cartridges or refilled HP ink cartridges. If you do not use genuine HP ink cartridges, the steps in this document might not resolve print quality issues.Visit HP SureSupply to check ink cartridge compatibility or purchase replacement ink cartridges.Go to the HP SureSupply website.Scroll to the bottom of the page, and then make sure the country/region location is correct.Follow the on-screen instructions to order new ink cartridges or check ink cartridge compatibility with your printer.Genuine HP ink cartridges can also be purchased from other retailers. Solution two: Check the estimated ink levels, and then replace any low or empty ink cartridgesLow ink can contribute to poor print quality. Follow these steps to check the estimated ink levels, and then replace any low or empty ink cartridges. Step 1: Check the estimated ink levelsFollow these steps to check the estimated ink levels.From the home screen of the printer control panel, touch the Ink icon (). The current ink levels display.Figure : Example of estimated ink levels NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When an indicator shows low-ink levels, consider having a replacement ink cartridge available to avoid possible printing delays. You do not need to replace ink cartridges until print quality becomes unacceptable.If none of the cartridges are low on ink, you do not need to replace them yet. Continue to the next solution.If any of the cartridges are low on ink, continue to the next step to replace them.Step 2: Replace any low or empty ink cartridgesFollow these steps to replace any low or empty ink cartridges.Video of replacing the ink cartridges The following video demonstrates how to replace a cartridge. If you have trouble viewing the video or to view the video in a different size, click here to play the video on YouTube.If the product is off, press the Power button () to turn on the product. Wait until the product is idle and silent before continuing.Open the cartridge access door. The carriage moves to the access area.Figure : Open the cartridge access doorPress the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.Figure : Remove the cartridge from the slotRemove the plastic wrap from a new cartridge by pulling the orange tab.Figure : Remove the plastic wrap from a new cartridge CAUTION: Make sure that you remove the orange pull-tab and plastic wrap completely before you twist the orange cap in the next step. Otherwise, ink might leak from the cartridge. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge.Remove the orange cap from the cartridge. Twist the cap counter-clockwise until it snaps off.Figure : Remove the orange cap from the cartridgeWith the nozzle and the contacts facing down, push the cartridge into its slot. Press down on the cartridge until it is firmly seated. Make sure that the color icon on the cartridge label matches the color icon on the slot.Figure : Insert the cartridgeRepeat these steps to insert the other cartridges.Close the cartridge access door.Figure : Close the cartridge access doorStep 3: Align the printer Follow these steps to align the printer using the control panel.From the home screen, touch the Setup icon (), and then touch Tools.Touch the Down Arrow (), and then touch Align Printer. The alignment page prints.Lift the lid on the printer, and then place the alignment page print side down in the right front corner of the scanner glass.Figure : Place the alignment page on the scanner glassClose the lid, and then press OK on the control panel. The printer will align automatically. Press OK to continue.Solution three: Make sure that the ink cartridges are properly vented and seated correctlyIf the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.Open the cartridge access door. The carriage moves to the access area.Figure : Open the cartridge access doorPress the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.Figure : Remove the cartridge from the slotExamine the vent area on each cartridge, above the HP logo on the top of the cartridge.Figure : Vent area on the top of the cartridgeIf the cartridge still has the orange pull-tab attached, pull to remove it.Figure : Orange pull tabIf the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.Figure : Clean the clogged vent with a pinClogged ventWith a straight pin, gently remove excess adhesive from the ventUnclogged ventWith the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place. NOTE: Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.Figure : Reinsert the cartridgeRepeat these steps to inspect the vents on each of the cartridges.Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.Close the cartridge access door.Figure : Close the cartridge access doorTry the print job again.Solution four: Clean the printheadFollow these steps to use an automated tool to clean the printhead.Make sure that plain white U.S. letter or A4 size paper is loaded in the tray.From the control panel home screen, touch the Settings icon (), and then touch Tools.Touch the Down Arrow (), and then touch Clean Printhead. The product cleans the printheads, and then prints a test page.Review the print quality on the test page.Figure : Example of the printhead cleaning test pageIf the print quality on the test page is satisfactory, return to the current print job.If the print quality on the test page is unsatisfactory, perform a secondary cleaning of the printhead.If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last cleaning stage to start the first stage of the cleaning process over again. NOTE: Never turn off the printer when ink cartridges are missing. Make sure that you replace any missing ink cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. To avoid issues that require cleaning the printhead, always turn the printer off with the Power button on the printer itself.Solution five: Service the printer Contacting HP for service in all countries/regions except Asia Pacific.If you completed all the preceding steps and your product still has an issue, service the product.First, go to Check your product warranty to check your printer warranty status, and then go to Contact HP Support to find an authorized service dealer or to schedule a repair.Repair fees might apply for out-of-warranty printers. NOTE: Keep a print sample that shows the problem. If the ink cartridges, printhead, or printer is replaced under warranty, the support agent will request the print sample. If the printer is returned to HP, the print sample must be returned with the printer. Place the sample in the output tray when you package your printer for shipping. What you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number
Case number and phone number appear. I hope this helps. Good Luck!

WRT54G wireless - but not on more than one device at time- and now not at all

Since changing internet providers we have had major issues with our router and trying to get the wireless to work with more than one computer at a time. I am gathering it's an IP address conflict, we have had this message pop up sometimes-- but am not sure how to go about fixing it. I have a linksys WRT54G, 6 weeks out of warrenty ( I tried to call for support and was told they would *gladly* help me for $30-$40-- which really bugs me as this was the first time I EVER called. We should be allowed at least one free call no matter how long out of warrenty- end rant )
Anyway-- I have two laptops, Netflix via WII, and an I-touch. For awhile, one computer could access wireless, sometimes both would, sometimes none would- as has been the problem in the last couple of days. It seems one computer would be more consistent in "grabbing" access- don't know if this is important to know or not:)) I tried to look to see if his computer had a static ip address - but couldn't find any info to support that theory...
I doubt it is a router failure as it was working fine with the previous interent provider- but now it is not-- I have tried to reset the router and reconfigure via the webbased setup pages. Nothing I am trying is working, not real surprising-- as I really don't know what I am doing--
I don't think it is the internet provider as internet access works fine hardwired trhough the modem via the router...
Can someone ** please** help walk me through this??
thanks
Tammy

Thanks for the reply-- The issue has been solved.....
I found an online manual and was in the process of reinstalling the wrt54g cd - starting over from the beginning. I felt since it started only after we switched ISPs , that it must have been a config problem and turns out it was.... The manual said to ask ISP for settings. I tried to do that 3 weeks ago and the tech support for ATT was unhelpful.
So I tried calling ATT again today for the proper settings for the router. The tech was fantastic. She walked me through everything -- so now I have wireless PCs, netflix and Itouch again, yea!! It was not the router, but trying to get the modem and the router to communicate with each other....
Thanks for trying
Tammy

Photosmart 5520 AIO not printing

The printer belongs to my daughter. I just found out that she ran out of ink 3 or 4 months ago and put the printer in the closet. I received it over the weekend, bought new HP cartridges and am trying to get it to print.
The black won't print at all. The blue is very blurry, as is the yellow. The red seems to be ok. My guess is that whatever ink remained in the cartridges dried out and won't let the fresh ink through. I have run the "Clean Printhead" a number of times and not solved the problem. I have looked through many posts and do not find a similar one.
Does anyone have any ideas/suggestions?

I saw your post and have forwarded it to the right people to have it reviewed. You should hear back from someone shortly via private message on this forum.
Keep an eye on the PM (Private Message) envelope at the top right corner of each page. When you see a number next to the grey envelope, click it. That's the way you'll be contacted.
If you need to know how to post a private message
click here
Thanks.
- I worked for HP.

HP photosmart 5520 my new printer on photo printing keeps stating out of paper

my new HP photosmart 5520 will not print photos. It keeps flashing "out of paper, reload" when the printer is already loaded with paper single and several sheets. Is this a faulty machine that I bought or can it be rectified. I never had this problem with my previous Kodak printer. Could you please advise what can be done to remedy this or should I purchase another make of printer. Thanks Michael

Hello shuter1,
Welcome to the HP Support Forums!
I see you are having photo printing issues with the Photosmart 5520, it will not feed the paper. Will the printer print on regular 8.5x11 paper?
What is the paper type and size you are trying to print these photos on?
See if following the steps outlined in this guide will help: Printing Photos Saved on Your Computer or Memory Card.
I will look back for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Photosmart 5510 will not print Black Ink!! - Time to "break-up" with HP

I came upon this forum by doing a google search for the issue I'm having which is my HP Photosmart 5510 will not print black ink. The printer is a year and a half old and is used only for home office use (not a heck of a lot of printing being done)
It started right after I installed new ink cartridges (all four of them) I want to mention hear that I ONLY buy genuine HP ink cartridges from Staples and when I replace my cartriges I replace all four at the same time even if one ink level is not considered "replaceably" low. When the issue started I thought I must have gotten a bad black cartridge so I went out and bought another one but was still having the issue. So that's when I did my google search.
I tried all the suggestions (several times) on this post (which did not reslove the problem) : http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Photosmart-5510-will-not-print/m-p/1...
and I tried a "Hard Reset" as suggested here (again did not resolve the problem) : http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-5510-Will-not-print-in-...
After trying all of these my color ink is less than half full....remember....I started with 4 brand new ink cartridges...so now, I'm out roughly $85 in ink just trying to resolve a problem that should not have happened in the first place!! Shame on HP for makeing such poor quality products. I gave up on HP computers years ago and now I'm giving up on their printers!! This HP Photosmart 5510 All In One printer replaced an HP Color Laserjet CM1312nfi printer (which cost approximately $400) that only lasted about 3 years. Sorry HP but that's it....I'm moving on! Consider this our "break-up" letter.

Hi TisKate, sorry to hear that you are having printing issues when it comes to printing in Black. I am also sorry to hear that you are breaking up with HP. I would like to offer a couple more troubleshooting steps before we say our fond farewells. Now this might sound silly but really it isn't. If you have the power cable connected to a Power bar/strip, please remove it and connect the power cable directly to a wall outlet. HP printers already have a built in surge protector and if you have it in a strip/bar, the printer will not get all the power needed to function properly. This can cause printing issues or false error messages on the printer display screen. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
The other step I would like to take is on the printers display touch screen. Please use the right arrow key and go to the Wrench icon. Press the wrench and go to the Tools menu. Once in the Tools menu, please select Clean Printhead. Use the cleaning utility 2-3 times or until you see a change in the print status reports. It might take a few cycles but I am confident that it will make a difference.
I hope you and HP can still be friends( friendly humor).
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

IMac 7,1. Snow Leopard. 2 printers that printed nothing, or more than ±1/4 from page top. Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4 series shown, each taking +8 hours to complete. How to reinstall from 'DEVICES' in 'iMac'?

iMac 7,1. SnowLeopard. 2 printers that printed nothing, or more than ±1/4 from page top.Reinstalled OS. Time Machine BU now allows only latest (faulty) files. ±4series shown, each taking +8 hours to complete. How to reinstall from ‘DEVICES’in ‘iMac’?

You need to get rid of MacKeeper (Zeobit). Do not use their uninstaller, follow the instructions here ...
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
When that is done there does not appear to be a lot wrong if you correct the red ink entries.
The 4Gb is sufficient for Yosemite though 6 or 8 Gb would be better. You may find the download slow so be prepared.

My HP Photosmart 8250 will not print in black.

Hi,
My HP Photosmart 8250 will not print in black. I saw previous posts stating that it will not print in black if any of the color cartridges are empty, but all of the cartridges have ink. Thank you!

Hi rine051662hart,
Welcome to the HP Forums.
I see that you are having an issue when attempting to print in black ink.
Please click on the following link that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
Please feel free to write me back if you have additional questions or you can contact HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP photosmart 109a printer - Not printing black ink

Hi. I am having problems with my HP photosmart 109a printer. It is printing in the other 3 colours but is not printing from the black cartridge. I have tried replacing the black cartridge twice now with 2 brand new cartridges. I have also tried cleaning the ink head. Any idea what else might be wrong or what I might need to do?
Thanks

Hi @CWBarr,
Welcome to the HP Forums!
I see that your HP Photosmart b109a will not print in black. I am sorry to hear this, but happy to help you with this issue!
Please see this print quality guide, Fixing Print Quality Problems for the HP Photosmart B109 All-in-One Printer Series.
If the guide does not resolve the issue, then see this post, Re: black ink not working, by @Bob_Headrick.
Hope this clears things up for you!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to setup hp photosmart 5520 two side printing on Windows 8.1

How to setup hp photosmart 5520 two side printing on Windows 8.1

stanko wrote:
How to setup hp photosmart 5520 two side printing on Windows 8.1
Hi,
If you wish to keep print both sides as default, pleae try:
(a) Double click (or touch) "HP Photosmart 5520" icon (should be one on desktop,
(b) Click Set Preferences
(c) In "Lay out" tab, there are 3 options in print Both sides, select "Flip on Long Edge" (normally for Portrait printing)
(d) Click "Apply"
You can overwrite this default when printing from applications using Printer properties.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My photosmart D5360 is not printing label to cd

My photosmart D5360 is not printing label to cd, please reveal pos causes. printing to main tray is no problem

Did you ever get an answer to this? My Photosmart is doing the same.
Printing on to paper - no problem.
But on to a Disc - It Loads the disc and goes through the print cycle, but nothing gets printed.

My Photosmart C6280 will not print in color.

My Photosmart C6280 will not print in color.All ink levels are good. Factory defaults clicked. Did I override something without realizing it? I don't see anywhere to click for grayscale. I am using an APPLE AIR....I have also turned the printer off and on again..

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My photosmart 6520 will not print a PDF file.

My photosmart 6520 will not print a PDF file

Hi Silverfox2895,
I see that you're having problems with printing PDF files. I would try using foxit reader below.
Foxit Reader
Let me know how it goes.

Photosmart D7560 will not print envelopes - load paper into main tray

My photosmart d7560 will not print envelopes, after moving the envelope into position for printing, the message "load paper into main tray" is displayed. It does print the envelope data correctly on a piece of 8.5x11 paper. Setup is for a #10 envelope. Envelopes are self sealing. I have tried creasing the edge better but that didn't help. I tried a non-self seal (which had a letterhead on it so I couldn't use it for this mailing) and it DID work. Is there any way to make self seal envelopes work in this printer?
This question was solved.
View Solution.

Do you have the flap folded inside the envelope, so that it does not stick out?
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Hp photosmart 5515 will not print black.

hp photosmart 5515 will not print black, but will print colors (cyan blue yellow). Printer shows full inks on all colors.
This question was solved.
View Solution.

No solution. Power cycled several times, power cycled computers, modem, router, performed all recommended cleanings, changed all ink cartridges, checked it over several days - no go. Then, suddenly, after weeks, it started printing again. That's one hell of a gremlin. Throughout all of this time, my inexpensive Canon printer never faltered.

HP Photosmart 6510 will not print black ink

I am 6 months past my warranty and suddenly the printer stopped printing in black ink. Up to this point, I was very satisfied with the printer. I have tried all of the instructions from the support manual, but to no avail. This appears to be a common issue on the discussion board. Very frustrating.... Please let me know how to fix it.  It would be nice if one of the HP reps, who have responded to all of these postings, would post the fix for this instead of having a private chat with the individual.

Hi folks, 'm sure this has been a frustrating experience for you. I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an... If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours
Based on the comments, it looks like this will help  King_Zog wrote:
I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick. So, thank you Sunshyn2005, for pointing me to the solution.   - Source Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide. If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.

HP Photosmart 5520 printer not printing more than 4 pages at a time.

Similar Messages

Maybe you are looking for