Hp photosmart 6510 printing and photocopying blank pages even after putting in new ink cardridges

Hi there, can anyone help?
My photosmart 6510 has recently started printing and photocopying blank pages.  The ink cardridges were low and I have replaced them with new ones. I have cleaned the printer head and the test comes out in colour.
I have no idea what to do other than buy a new one !
Any advice appreciated.

Hi @TG13,
I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...  < this applies to the 6510, and 6515 too.
If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video.  I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours 
Based on the comments, it looks like this will help 
King_Zog wrote:
I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick.
So, thank you Sunshyn2005, for pointing me to the solution.   - Source
Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • I am trying to print and only blank pages and codes are printing?

    My family have recently got a FujiXerox DocumentCentre C240 and I am trying to print to it. I have downloaded the printer software and added the printer through the IP address with selecting the right printer software. The printer says it is installed corrected and when I go to print it starts printing pages with a codes of what I'm trying to print at the top as well as lots of blank pages after.
    What can I do to make this work and print what I want it to print?

    Contact FujiXerox

  • HP Photosmart 6520: Black ink is not printing evening after installing all new ink cartidges

    Good evening,
    Printer has been working great since I've bought it.  I replaced the black ink cartridge today because my daughter remarked that blank pages was printing ... no word doc.
    Tonight I tried to print and no black ink, neither from the Printer function nor the Copy function.  
    Just to make sure that this wasn't a bad black ink cartridge, I went out and bought and installed all the ink cartridges and still no black ink,.
    I have run the software - Clean Printheads, both steps, twice (after waiting an hour inbetween the first and second series.)
    I have verified that the in flows from the cartridge.
    I have verified that the vent hole on the cartridge is open.  
    The warranty ended on 12-31-2013. 
    The only time I see black ink (words) is when I print the PRINT QUALITY DIAGNOSTIC report.
    Printhead removal does not appear to be user available.  Any suggestions - other than buy a new one?
    Gunz

    Hello afcosta355,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 6520, you are unable to print in black ink after replacing the cartridge.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

    Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

    Hi Equi_nut,
    Do you have the same printer as the user above? 

  • I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    Is your printer selected? <br />
    Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
    See the screenshot below.

  • Black ink not printing on my hp photosmart 6510 printer

    I have a HPphotosmart 6510 printer that all of a sudden doesn't print in black ink anmore. I have done everything that I read to do. Even replaced black ink a couple times. I don't want to replace my printer its not that old and I reall like it.

    Hi @Barbiegirl17 and welcome to the HP Forums!
    I'm sorry to hear you've had issues printing black with your Photosmart 6510 printer, but I will absolutely do my best to lend a helping hand
    I will suggest that you try the steps within this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document first. If that doesn't resolve the issue can you please let me know whether it's in or out of warranty and what country you reside in? Thanks!
    Hope to hear back from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Report views correctly in Report Viewer but on export or print, blank page inserted after every page

    Hi all
    I'm hoping someone has an idea what is causing this issue. I am using Crystal 2008 and have created many reports over the years, with no issue like this.
    I have had to create a label file for an Avery label that does not appear in the Crystal Reports default list of label definitions (have done this many times before for other labels, with no issue).
    The report displays perfectly in the CR Report Viewer, however once the report is sent either to PDF export or to the printer, an extra blank page is inserted after every page of the report.
    The fact that it displays correctly in the viewer means there is nothing in the report that is amiss.... there is something going on when the report is sent out.
    I've read a lot of similar problems, however the idea that it is a network problem doesn't explain why the hundreds of other reports I've created exactly the same way... do not have this problem!
    Does anyone know the answer to this puzzle?
    regards
    Kaz

    Hi Karen
    Here is the issue. When you look at the report in the viewer you see this:
    Notice the dashed line after the body of each label. That line is there because the report is formatted to be a column report:
    So the viewer shows you that there is another column to be printed / exported and that is what is happening with the report.
    - Ludek

  • Printing an extra blank page at last in the report with result!

    Dear Team,
    I have one report  ZFI_KKKKK  i.e working fine with the result.
    The problem is that this report prints an extra blank page in the end of the report.
    It should not print the extra empty page. Itu2019s a bit annoying for some users.
    If you execute and print this and you will get a page with results and a blank page with just the title.
    Any input from your side to rectify the issue?
    Thanks and Regards,
    Sarkar

    Hi,
    change the line size and check.
    vijay Gurav

  • Printer spewing out blank pages

    hi. suddenly yesterday when i try to print anything from my documents which i use microsoft office 2010 , it is spewing out blank pages.
    it sounds as if it is printing but nothing comes on the paper, i have new inks in and if i use a craft program it will print.
    i have done the help doctor program and it says eveything is okay and prints a test paper
    anyone any ideas please

    Does this printer have a removeable print cartridge and was there a long period of time that the printer was not used? Have you tried performing the automated print-head cleaining? Do that three times as well. 
    -Spencer 

  • Printer spits out blank pages v8.1.3

    When I hit print button, my printer spits out blank pages
    (about the same number as there are pages in the pdf document). The
    printer works fine with other programs (Word, Excel etc.) but not
    with the Acrobat 8.1.3
    What gives?

    Thank you for your posting. These forums are specific to the
    Acrobat.com website and it's set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

    I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • Hp envy 4501 does't print just leaves blank pages

    My Hp envy 4501 doesn't print. It just makes printing sounds then the page comes out blank. I just put in a new ink cartage in the slot. Please help. I need to print out my large essay. My model number is SDGOB-1301

    Hi there @Heyitsdavid !
    Thanks for contacting the HP Forums!
    I can see by your post here that after installing a new cartridge the printer is producing blank pages. I should be able to provide useful information for locating a fix so you can get printing your essay!
    If it is the cartridge causing the problem and you need to get that essay printed and out of the way.  The printer works on a single cartridge mode.  This means if you remove the problem cartridge then the printer can use one cartridge to print. The black cartridge will print grey scale and the tricolour will mix colors to make black.
    Does this blank page only happen when printing from the computer?
    The first thing you will want to check when getting a print quality issue is to perform a stand alone copy on the printer. To perform a stand alone copy please follow the link for Copy Text or Mixed Documents.  this will let you know if the issue is related to the printer hardware or the computer software.
    If the copy IS blank then please follow the document for Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP ENVY 4500 and Deskjet In...
    If the document prints WITHOUT quality issues then you are likely looking at a software problem within the computer. If that is the case, for me to provide relevant troubleshooting steps I will need you to provide me with some info on the computer. What operating system your computer is running (ex. Windows or Mac).  If you are running Windows please provide the bit version of Windows (ex.Windows 7 32-bit or Windows 7 64-bit.)
    If you are running Mac but don't know the version, please follow the link for: Finding the OS X version and build information on your Mac
    If you are running Windows but don't know the version, please follow the link for:  Which Windows operating system am I running? 
    If you are unaware the bit-version on your windows operating system, follow the link for: Is the Windows Version on My Computer 32-bit or 64-bit? 
    Please post back with your results of troubleshooting and let me know how it goes!
    thanks again for chatting on the HP Forum!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Photosmart 6510 Printer error message 0xc19a0003.

    I have a Photosmart 6510 Printer error message 0xc19a0003. I have re-powered the printer but still get the error message Oxc19a0003. Suggestions to fix?
    Thanks!

    You are correct, gksurgeon, the 5510 does not have a removable printhead. If you followed the steps in the document above, then the printer will need to be replaced.
    If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
    HP Technical Support Case Call Form:
    http://goo.gl/w7Hgh
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

    HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture. 
    Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

    As far as I know,  you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Printing blank pages - even with new genuine HP cartridges

    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!

    arcalgud wrote:
    All of a sudden, my 6700 has started printing blank pages, even the copier runs blanks - after replacing cartridges with new HP cartridges.
    I ran all the diagnostics, printer says its fine, printhead was cleaned, and still printing blanks.
    Printer's out of warranty, what should I do? I just bought a ton of cartridges for this....!
    Help!!
    The document here may help resolve the issue of blank printing on the Officejet 6700. 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for