Hp photosmart 6525 icon pinned taskbar not working

printer icon pinned to taskbar suddenly stopped opening the window for choices of what you wanted to do with your printer, and now just displays the following window...

Hey there @Bloodstone422 
Welcome to the forums
I saw your post about the software no longer opening up on your system and I will surely do my best to help! It appears as though the software isn't completely installed, and am not quite sure what could have happened. However, I would suggest clicking on the option to "Connect a new printer", and try running through the setup again.
Let me know what happens and we will go from there!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • Lync 2010 and Lync 2013 blinking icon in taskbar not working properly

         Hi,
         We're experiencing a strange behaviour. Lync IM notifications are supposed to work this way below:
         1) Notification bubble on the right-bottom corner
         2) After a few seconds, a blinking icon in the task bar
         3) After a few seconds, a coloured icon remains in the task bar
         Some of our users, both Lync 2010 and Lync 2013, go 1) and 2) but then icon won't remain in the task bar, so they don't realize they have a conversation waiting (Windows XP and Windows 7).
         If they open the icon, the conversation is there and coloured, and they can answer.
         In my computer, it has also happened but most of the time it works fine (testing it, maybe it works 15 times and fails 1). Nevertheless, a lot of people is suffering from this strange behaviour.
         We have looked into the causes but haven't found anything.
         Any clue?
         Thanks!

    How long have you seen the problem?
    What version of your Lync client? Try to update your Lync client to the latest version.
    Try to repair office 2013.
    Uninstall and reinstall Lync 2010.
    Please install Lync 2013 or Lync 2010 on a fresh installation of Window to check if you can still see this problem.
    Lisa Zheng
    TechNet Community Support

  • I have iphone 4s and i updated it for iso 6 , the icon passbook its not working what shall i do

    I have iphone 4s and i updated it for iso 6 , the icon passbook its not working what shall i do, please note that i live in united arab emirates

    Hae you tried to do a hard reset of your phone? This will not lose any data. Hold the sleep/wake button and the home button until the phone turns off ignoring any slide to power off messages. Then power the phone back on.

  • The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    You don't swipe but actually press, hold and push up.

  • Icon view is not working

    Icon view is not working in my mac book pro.I tried other types of view, they all are working but icon view stopped working all of the sudden. Any suggestions how to fix it ???

    1st i reinstalled snow leapord......d problem was fixed icon view was working and yesterday i installed lion....and everything is working properly....
    try reinstalling......shuld work

  • Auto hide taskbar not working with iTunes 10.5 & Windows 7

    Anyone else having problems with Auto-hide Taskbar not working when iTunes is open and the active window? Was working fine with previous versions including the beta of 10.5 I had. Is this a general problem or just me? Im using Windows 7 64bit for what its worth.

    Chiming in with the same problem. 64-bit Win 7 Professional, taskbar set to auto-hide, newest version of iTunes (actually uninstalled and reinstalled via the website download earlier today to see if that would fix it; nope). I normally use the Alt+Tab keys to navigate between windows anyway, so it's not inconveniencing me too much, but it's still irritating when I'm trying to use the mouse to switch windows (or check the time) and realize I can't. Definitely fix this one soon. We'll all be very grateful

  • The little grey camera icon ( IMovie) is not working or allowing me to open my photos. I have no problem inserting video. Just won't let me open my photos. Any ideas?

    The little grey camera icon ( IMovie) is not working or allowing me to open my photos. I have no problem inserting video. Just won't let me open my photos. Any ideas?

    deanfromdouglasville,
    It may help to rebuild your iPhoto Library's database, as detailed in the article linked below.
    iPhoto 6 and later: Rebuilding the iPhoto library
    http://support.apple.com/en-us/HT201769
    Regards,
    Allen

  • The icon "Settings" is not working in my ipad2

    The Icon "Settings" of my ipad 2is not working. If you click it does not respond. It just started like that yesterday but today anoher problem that i can not slide to restart, and if i t works it just open with a very low speed. Someone tell me waht to do.

    Try closing the Settings 'app' completely : from the home screen (i.e. not with the Settings app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Lightning to 30-pin adapter not working w/iHome/iPhone 6.

    Lightning to 30-pin adapter is not working correctly with iHome/iPhone 6.  When I plug phone in the music and time update will work but it won't charge the phone, unless I turn my phone around but then music won't work.  I've only had my iHome for a year and used it with no problem with my 4S.  Now that I have the iPhone 6 I decided to get the adapter so I wouldn't have to spend money on a new iHome.  I thought I just had a bad adapter, at least that's what they told me in the Apple Store.  So I exhanged it at Best Buy, where I bought it, and got another one.  Very disappointed that I have the same problem.  Anyone else have this problem?  Did I just wain't $30.

    No-one from Apple here
    It is either a corrupt update to iOS
    or something in Honda that no longer likes iOS 8.3
    To eliminate an issue with iOS 8.3 basic troubleshooting
    Restart
    Reset
    Restore ,as new ,check iPhone functions if working correctly then restore your back up to get back to normal
    If still an issue you then need to eliminate the potential Honda side,2007 is very old technology compared to 8.3

  • Lightning to 30-pin Adapter not work properly with iPhone 5s

    Lightning to 30-pin Adapter (0.2 m)       with iPhone 5s working good with power adapter and 30-pin cable, but how iPhone at 100% power, I see message "This accessories is not working correctly".
    But with iPad mini 1 everything is OK.

    Bottom line, the iPhone case restricted insertion of the 8 pin adapter into the IPhone. Slide in cases with open bottoms have no problems but wrap around cases can restrict flush insertion due to insufficient access to the recepticle in the iPhone.

  • HP Photosmart C6200 Series Blue Inks Not Working

    Hi all,
    I have an HP Photosmart c6200 series printer and the blue ink cartridges are not working. I've read similar problems about black ink cartridges, but on different printers so I am looking for some help here.
    All of my ink cartridges recently expired, so I went to a professional store and had them emptied and refilled. I put all of the ink cartridges back in the printer and did a test - I noticed the blue inks were not working. From there, I have tried removing them/reinserting them, looking for visible chunks and running printhead cleans from the printer. So far nothing is working.
    I've printed out a diagnostics page and the boxes that should have the blue inks show up completely empty, not just streaky. I have followed all instructions from the diagnostics page.
    If anyone has any suggestions they would be greatly appreciated. I do not think my printer is under warranty anymore.

    Hi JessicaBruzzese,
    I understand you have a Photosmart C6200 printer that is not printing any blue after refilling the cartridges. I'm sorry to hear this, but I will do my best to help.
    It sounds to me like the refilled ink may not be able to make it out of the cartridge. I will suggest that you plug the printer directly to a wall outlet and follow this Missing, Faded, or Dull Colors document. If it's still not working after that, you can also try cleaning the cartridge contacts.
    If the blue continues not to print, you may have to purchase another HP cartridge.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Exit icon on playbar not working in LMS

    Hello,
    I was wondering why the close icon X on the playbar of a CP6 project does not work when publishing and placing in an LMS?  Any ideas?
    Thanks kindly
    alison

    This might help.
    http://forums.adobe.com/thread/874798?tstart=540

  • Icon in taskbar not transparent

    Just a very minor nitpicking issue:
    The icon used for Raptor on the taskbar has a white background and is not transparent. This doesn't look very pretty. Probably one for the very last entry on your issue list.

    and maybe the icon should be more expressive. Some black border around symbol etc. See my current icons in taskbar - it's hard to find the raptor's one:
    http://www.yarpen.cz/raptor/icon_inexpressive.png

  • Printer icon on word not working

    My printer icon on word is not working and my buttons for lighting up the keyboard isnt working either

    What do you mean exactly by "printer icon on word"?
    What key board are you referring to? It says you have a Mac Pro. This is the MacBook Pro forum. Please provide correct and additional information about your Mac please.

  • BB Link "icon" on desktop not working -

    I downloaded BBLink software; the icon is on my tool bar.  However, when I point/click on the icon it does absolutely nothing.  I tried downloading to computer 2x's - still does not work. Help? thank you.

    It could be a browser issue if it's on your browser's toolbar. I only suggest this because I'm not aware of this being a widespread problem.
    The first step in troubleshooting this issue is to try clicking the desktop icon as opposed to a toolbar icon.
    Keep us posted.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Maybe you are looking for

  • How do I submit a computer for repairs/use my warranty?

    Okay, I have a HP Pavillion 500-a60 Desktop PC and this thing has given me trouble since I've first gotten it! The frist problem was that it's hardware system crashed within the frist 3 weeks of having it THEN when I got a new one it wouldn't conntec

  • Windows (8.1) could not find back up devices while creating a system image (0x80070003)

    I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error. A LaCie 1Tb external harddis

  • LSMW using Recording

    Hi, I am trying to upload Regional structure using LSMW. I have recorded transaction SR10 (Create City) but I am not sure how to proceed further. What changes I need to do in the recording and what should be the target structure for that. If anybody

  • Need a sample configuration

    Folks, I wrote a small program to parse the configuration. I am looking for a sample configuration of a Edge Router ( preferably 7200 ) having lots of configuration data including VPN , Martini Tunnel etc. I need to test my parser. Any help will be g

  • How do I over ride an auto spelling correct?  Somehow I need to add the word into the system.

    I am trying to type a word into an email and it continuously over rides the word with other suggestions, even if I hit the period button and not the space button.  How do I add this word to my IPad?