HP Photosmart 7450 Driver

Please can some-one provide me with a link to download a driver for  an HP Photosmart 7450 for Windows 7 (64). I have tried the HP site, but said not available as a download and other sites want you to first downloaded all there crap which I have to go and uninstall. 
Many thanks

Hi,
The HP Software is not available for download, the drivers for your printer are already integrated within Windows 7.
Follow the steps below to set up the printer on Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&cc=us&dlc=en&lc=en&os=4062&product=397...
If you may experience any issues installing the printer, try following the steps below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663742&lc=en&cc=us&dlc=en&product=397785
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Print wirelessly with HP Photosmart 7450

    I have an HP Photosmart 7450 printer and a Cisco wireless router.  I also have an HP LaserJet m1212nf that I am printer to wirelessly.  I have an HP desktop and a Samsung netbook.  How do I print to my 7450 from the netbook?

    Hi,
    The HP Photosmart 7450 does not support network connectivity but only a direct USB connection to a computer, you may find the product specifications listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00213847&cc=us&dlc=en&lc=en&product=397785#N260
    Basiclly, you should simply plug the USB to a Windows 7 or 8 PC to get it working on your PC.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Cannot install hp photosmart 7450 in windows 7 computer

    I've already tried the steps in manually installing the printer, but still, it failed to install.
    Is there another way to install my HP Photosmart 7450 in my windows 7 compute?

    cheriberi wrote:
    I changed to a DOT port and tried sending something and now it shows that the document is waiting (no error this time), but now I keep getting a message that the color cartridge is not installed correctly. I've taken it out and put it back in about 20 times and can't get rid of the message! I tried turning it off and on again. When I did that, the message changed to something being wrong with the black cartridge. This is very frustrating!!
    OK, you are making some progress.  Try cleaning the contacts on the cartridges as shown in this link.  If cleaning the cartridge contacts does not resolve the issue you may need new cartridges, especially if they are very old.  You can check the cartridge warranty date (two years from manufacture date) as shown here. 
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Message Edited by Bob_Headrick on 09-11-2009 07:32 PM
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart 7960 driver (.inf) file name

    What is the Windows XP HP Photosmart 7960 driver (.inf) file name?

    I have tried every solution I can find to my problem - I cannot install a Photosmart 7960 printer on my HP Pavilion XP desktop.  The installation wizard won't work.  It ends in an error message and then undoes what it has accomplished up to that point.  I think the wizard extracts the driver(s) from the downloaded file hp_53_enu.exe and puts it in the right place before the error, then it undoes that progress, making it impossible to find the driver or even identify the file name.  I want to try some manual installation ideas, but I need to find the actual driver, not the zip file or the wizard.  Can someone tell me the driver filename(s)?  I can find the file on a second, identical computer if you can give me the file name.
    Thanks
    McGyver

  • HT1338 Is there a HP Photosmart printer driver update 12.16.1 that supports OS 10.7.5 that will allow me to scan documents with OCR?  If so where/how do I download or get it?  Thanks

    Sorry,  I meant to say Apple printer driver update 2.16.1 for OS 10.7.5.    Is there a HP Photosmart printer driver update 2.16.1 that supports OS 10.7.5 that will allow me to scan documents with OCR?  If so where/how do I download or get it?  Thanks
    <E-mail Edited by Host>

    Hi pmaragoni,
    I understand that you are looking for an updated driver for your HP Photosmart printer. Here is a link to the updated drivers from Apple for HP printers.
    LINK: http://support.apple.com/kb/DL907
    I hope this helps,
    Advance 23
    I work on behalf of HP

  • Hewlett Packard PhotoSmart C20 driver?

    -Webcam Hewlett Packard PhotoSmart C20  driver.
    -Operating System: WindowsXP SP3
     -pc model HP2140 (HP Mini)
    Hey all,I ve got a problem with my preinstalled Hewlett Packard PhotoSmart C20 webcam that the follder containing the driver is empty (i don`t know how it happened ).
    I would be greatful if i would be sent a copy of the Hewlett Packard PhotoSmart C20 driver!
    Thanks in advnce
    All the best

    Hi,
    Please try Chicony Camera driver for Windows XP from the following link
        http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3872999&swItemId=ob_103141_1&swEnvOid=109...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Photosmart c6180 driver disapears after restarting Windows 7

    Problem is: Photosmart c6180 driver disapears after restarting Windows 7
    Operating System is: Windows 7
    Connection is Wireless
    Printer is Photosmart c6180
    Driver is for Windows
    7 and has been downloaded multiple several times from the HP Website
    HP Support was not help:  they could not even get the printer to work even when it was wired USB since they refused to remove the driver first.  I have old computers and use USB Hubs so it puts a strain on the resources to hook up to much on the USB Ports evern with the extra power they have. 
    I have removed the driver and reinstalled it at least 2-3 times a month since January.  The computer sees and installs the printer and it works fine as long as I do not shut down the computer.  However whenever there are any updates for windows the computer needs to be restarted and then the printer won't work anymore. 
    I tryed this today which I found on the internet and it did not work either. 
    Click on another printer or the Microsoft XPS Document Writer
    Click on Printer server properties in the top menu
    Choose Drivers in the Installed printer drivers select the printer that was uninstalled in step 3.
    Click on Remove and when asked choose Remove driver and driver package and click on ok.
    Install the Windows 7 software for the printer.
    Does anyone have anything else I can try.  I reinstall the printer driver again for the second time today and it allways works just fine if I just never had to restart the computer it would work fine. 
    I have reloaded th

    Have you tried this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP Photosmart 245 Driver for Windows 7?

    Ok, so I picked up this Photosmart 245 from a tag sale and quickly learned it was very old. I followed some articles and came to an article that said a compadible driver was the Photosmart 330. So, I go to download the Photosmart 330 driver, and all it tells me is to plug it in to the computer. If I don't own it, how am I supposed to plug it into the computer? I keep reading, and it also tells me there is a wizard. I follow the wizard's steps, and to no avail. Apparently this "wizard" doesn't have very much magic. It tells me that the Photosmart 245 does not have a driver, and to download the Photosmart 330 driver. Nowhere on HP's website will it provide me with a Windows 7 driver for the Photosmart 330. Does anyone know where I can get a plain old .exe that will install the driver? Help greatly appreciated!

    Note:  I also tried to rebuild Windows Update's SoftwareDistribution file to get Photosmart 330 to show up, that didn't work either

  • Cannot install HP Photosmart 2610 Driver with windows xp

    cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

    Hello, 
    Please check if you have an ADMIN rights to log into your PC.
    Else, create an ADMIN user account and then run the installation ,
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Photosmart B8550 driver for Maverick NOT AVAILABLE

    Photosmart B8550 driver for Maverick NOT AVAILABLE.
    The website should say that it has it, or it doesn't!  So ambiguious...
    Call tech support and for a kindly $25 box we'll show a work around.  I interpret that to be obsolesence.  You are up to date or you are not.  The refund of the money is more complicated to monitor than when the softweare patch would be available, at least 5 times more complicated.  Wait for the bank statement to see if ther money was refunded, and than follow up for the refund, come ON!

    Tomesh,
    Problem is not so clear but I can say you can try these things.
    1. Are you trying to do retroactive calculation for particular employee . If yes, then check the driver perk wage type validity period.
    2. If you are using some constant table to calculate Driver's perk value then you must check that contact table and dates mentioned there.

  • HP Photosmart 7450

    Salve,
    la mia Photosmart 7450 mi da un problema:
    un foglio bianco si blocca dopo aver fatto il giro per uscire... sempre nella stessa posizione...
    Lo tolgo dallo sportello sul retro ma se tento di stampare lui riparte e si riblocca nela stessa posizione...
    Ho provato a togliere l'alimentazione e poi a ricollegare oppure togliere il collegamento USB e anche ad annullare la stampa ma la maledetta "spia rossa" ritorna a lampeggiare...
    Sarà un problema molto importante? Ci sarà la possibilità di risolvere il problema e ripristinare la stampante?
    Ho appena cambiato la cartuccia "57", quella del nero ha ancora un pò d'inchiostro...
    C'è un'anima buona che mi può dare una mano?
    Grazie a tutti.
    luclor97

    luclor97 wrote:  [Translated by Bing]
    Hi,
    My Photosmart 7450 gives me a problem:
    a white sheet hangs after making the rounds to exit ... always in the same position ...
    The take away from the door at the back but if I try to print him again and riblocca in the same position ...
    I tried to remove the power supply and then reconnect, or remove the USB connection and to cancel the press but the cursed "red light" to blink ...
    It will be a very important problem? There will be a chance to solve the problem and restore the printer?
    I just changed the cartridge "57", that of black still has a bit of ink ...
    There is a good soul who can give me a hand?
    Thanks to all.
    luclor97
     See http://h10025.www1.hp.com/ewfrf/wc/document?docname=biy20231&tmp_task=solveCategory&cc=it&dlc=it&lan...
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart 7450 appears to be jammed, blinking red light

    My Photosmart 7450 had been working great until a few weeks ago. It just stopped printing. I didn't change any settings or cartridges. I've tried unplugging everything, cleaning it out, changing cartridges, test prints...
    Symptoms:
    - When I turn it on the light is green and appears to be functional (Good)
    - When I tell it to print it feeds the paper into the proper position (Good)
    - The print cartridges start moving (Good)
    - Red light comes on blinking and everything stops (Bad)
    - When I open the lid the cartridge is on the right side, and when I try and move it by hand it is stuck by a little tab below it
    Any thoughts what it might be and how I can fix it? Thanks.

    What modem do you have? Is it a pure modem.. ie no router??
    If it is a router then the Express has to be in bridge mode.
    Assuming you have a pure cable modem..
    When you change from the computer to the Airport Express, are you powering down the modem. If it has battery backup for phone you need to remove the battery as well.. it has to be off for around 20min but it can be longer or shorter than that. Restart the modem.. wait a couple of min then plug in the Express which must be in router mode so it captures the public IP.

  • Hp photosmart plus driver no longer working

    Hi all I have a photosmart plus came with an hp computer bundle used to work.  Now every time I go to try and make it work the following happens while installing the driver.
    a the driver installatiion stops/never completes
    b the driver installation can not see the wireless network or the printer when i plug in the usb cable, even though the computer sees the printer through the usb port and I can print through the usb port.
    This is on 2 computers the same crap I have no idea what to do.  I can not get the drivers to install and the only way I can print is by physically plugging the printer to a computer via usb and letting windows find it.
    Please help this is a giant pain in the ass.
    Fattyz 

    Sorry, I should have asked this earlier, what version of Windows are you using? 
    Since I don't want to waste too much more of your time with you waiting for me to reply, I will go ahead and give you two links of troubleshooting steps that I would recommend trying.
    The Progress Bar on the Software Installation Stops or Stalls
    'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer in Windows Du...
    The first one addresses the issue of the software not completing. The second, even though the title might not seem like an issue that you are having, addresses the issue of the printer not being recognized by USB.
    Try those and let me know if either of them work. If they don't, get back to me with your version of Windows and I will see if I can find anything else to help you resolve your issue.
    If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos.  I really appreciate it!
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Photosmart 2710 - driver - Windows 8 load no go help !!!!

    Running in circles trying to load the HP Photosmart 2710 All In One - driver - on the newer Windows 8 Desktop computer.  We are set up with a router & the rest of the laptops work fine.  I've gone to the http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03460648&cc=us&dlc=en&lc=en&os=4132&product=420​... 
    All In One HP Print Support Screen and tried to down load the driver through the wizzard & manually.  I have no signs that it is attempting to load. 
    Please help.
    Thanks,

    With the 2710 printing via the USB cable we know the class driver is available on the computer. I want you to have Windows Defender disabled, you can enabled it once the printer is added.
    Remove the USB connection and restart the computer.
    Open Devices and Printers then click Add a printer.
    Add a network, wireless or Bluetooth printer then select your 2710 (if the 2710 does not display in this list the printer is not being seen over the network and will have to be setup on the network again)
    Under Manufacturer select HP then under printers look for and select your 2710 (it may display as 2700)
    Finish the install and try to print.
    Let me know if this helped.
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Hp photosmart d7363 driver for windows 8

    Hi, I upgraded to Windows 8 and my photosmart D7363 printer isn't compatible with my new software. The production of the printer has been discontinued and I can't seem to be able to find a driver which will help get my printer to work. Is such a driver available somewhere? thanks.

    Hello, 
    Please download and run the HP Printer Install Wizard  from www.hp.com/go/tools, which should help you resolve the issue.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • How to export your final cut pro X project to be opened on another computer

    I have a fcpX project that I am currently editing, I want to give it to my video partner so he can continue editing it where I left off and complete it. How and what can I do for this to happen? I will putting the files on an external HD for him to b

  • Line item text CRM 7 Properties parameter in SalesDocumentCRM

    Greetings. I'm having a heck of a time sending my custom textid into the CRM backend in CR M 7.0. I notice in the SalesDocumentCRM class, there is some logic in the initBackendObject(Properties props, BackendBusinessObjectParams params) method there

  • I want to authenticate user from database

    hello im trying to authenticate the user from the data base but there after execute query i want to get no of rows using ocirowcount but there is no result in the ocirowcount it returns me 0 always there is no result in databae i also execute query t

  • Type in arabic ???

    Why Illustrator doesn't type in Arabic and connecting letters !!?

  • Why are my lab processed images always overcropped?

    This bugs the heck out of me. No matter where I have my files printed, they are cropped more than the original. I've had them printed by Snapfish, at better local labs, at Costco and Sam's Club stores, and even on an Epson PictureMate I bought. My Ca