HP Photosmart 7510 - loose connectivity when using Ethernet cable

Need help!
I have an HP Photosmart 7510 all-in-one printer connected to my home network via wireless.
I have 1 Windows7 laptop which successfully connects to the printer via the home Ethernet network (laptop connected via cat5) - so the overall system appears to be working fine on Windows.
I also have 1 MacMini running OS X 10.7.5 which can ONLY print/scan if the Ethernet connection is UNPLUGGED from the MacMini (thus forcing me to use my very poor and unreliable wireless signal).
As soon as I plug in the Ethernet cable to the MacMini I loose all connectivity to the printer. I have confirmed the Ethernet cable is good - as it works fine with my Windows7 laptop.
Has anyone figured out why I cannot use the physical Ethernet connection to communicate with the HP Photosmart?
Thanks!

Just making sure, you're running the Ethernet cable from the printer to the router, then running another cable from the router to the Mac, correct?
Have you added the printer's queue to the Mac once the Ethernet cable is connected, or does it not show up in Print and Scan?
I am a printer tech for HP.

Similar Messages

When using ethernet cables to use Migration Assistant - how are they used?, When using ethernet cables to use Migration Assistant - how are they used?

How do you wire the ethernet cables? This is from a novice. Do they go through the router or directly between computers using Migration Assistant?

Directly from one Mac to the other.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

SP2013 - Date Filter Web Part looses connection when used in a site template

Hi,
I created two table reports in SQL Reporting Services 2012 and inserted in a web page using the Reporting Service Report viewer in SharePoint 2013 with CU Dez 2013. The two reports require two dates and I use two date filter web parts (I did not try the
date range solution I saw in the fórum).
So the user inputs the two dates in date filters that send the information to thereports in the same page.
They work in the site and I saved it as template. However when I create e new site using it as a templates, the date filter connections are broken and of course, they did not work.
For another report where I usea text filter, it worked without any problem in the template.
Does anybody know any workaround?
Thank you.
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi ,
The new site based on the saved site template will generate new ID for date filter web part, in the web part page the SPWebPartConnection "ProviderID" value seems still to reference the original date filter web part ID (see from
SharePoint Designer), as a workaround we can re-configure the web part connection from the web part page manually or programmatically from that new site web part page.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8d98206d-b41f-4ee4-b537-a4bf5cec0434/sharepoint-2010-save-site-as-template-webpart-connections-broken?forum=sharepointgeneralprevious
http://sympmarc.com/2007/09/20/removing-a-web-part-connection-in-sharepoint/
Thank
Daniel Yang
TechNet Community Support

Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

Question
Hi, I connected to the internet in a different location using ethernet cable and when I got home websites like yahoo wont get to the sign in page and other sites too...weirdly facebook and google works ...please help...tearing my hair out!!!

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup? No idea what to do.

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup and Router Setup? I have previously used ethernets in similar situations and never had to input information like this?

I have tried to turn of the wi-fi but that doesn't work either. I think it could be a something to do with the internet provider because virginmedia comes up on the webpage. This is what comes up:
Wireless Setup
WGR614V9
V1.0.11_1.0.1VGUK
Wireless Setup
Name (SSID):
Security Passphrase (WPA-PSK):
(8-63 characters)
Channel:
01 06 11
Router Setup
Router Password:
(8-63 characters)
any ideas?!?

I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.

Hi
I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.
I have tried the suggested from below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=uk&dlc=en&lang=en&lc=en&product=507...
I have not tried to assign the static IP address suggested in step 6 on the web link above, I am not that technical & do not fully understand how to perform this task & am surprised HP expect retail client to follow this, if is a bit technical I think you must agree.
Anyway, the WiFi or Wireless blue led is blinking.
If I try to discover my wireless network, it is not displaye like it used , nor are my neighbors, my mobile Samsung Galaxy S displays my network and my neighbors when the phone in placed by my 7510.
When I try to enter the SSID & key, my 7510 times out without connecting to my router.
My pc is connected directly to my router (Buffalo) and I use a Fujitsu Desktop running Win 7 32bit.
By the way, I have done a "Factory reset" to my 7510 & this did not help at all.
Can anyone help?
Is my 7510 faulty?
Thanks in advance.

I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.

HP Photosmart 8750 prints slow when using Photo Gray Cartidge

HP Photosmart 8750 prints slow when using Photo Gray Cartidge ... sometimes indicates Black Cartridge failed, however upon reinserting works slow

Welcome to the HP Forums ButchG,
I see by your post that when printing with the photo gray cartridge the black cartridge will indicate that it has failed.
I can help you with this issue.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer, if the printer has external power module with a detachable power cord disconnect it for 15 seconds and then reconnect it.
Hold down the power button for 10 seconds to drain the power.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
I have provided a document for the cleaning the contacts and reseating the cartridge.
'Cartridge Failed' or 'Cartridge Not Compatible' Error Message.
What are the ink levels?
Are you using Genuine HP Cartridges?
Check the date on the cartridges to make sure they are still in warranty. (not old stock)
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule, or do we need their router to connect to the time capsule?

As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule or do we need the Verizon router to connect to time capsule?

The Time Capsule is indeed a wireless router with simultaneous dual band capability...and a hard drive for backup purposes. You can use that to your advantage if you configure the Time Capsule as I suggested in Bridge Mode.
The Time Capsule will provide a 802.11n 5 GHz band and a 802.11n/g/b compatible 2.4 GHz band to allow virtually any device to connect to the network.
I suppose that you could also use the "g" wireless network provided by the Verizon router as a "guest" network or something similar if you really do need another wireless network.
It might be possible to configure the Time Capsule as the main router on the network....that's a question for Verizon. But even if you might be able to do this, I'm sure it is not supported by Verizon, so you would be on your own in the event of any Internet connection difficulties on your service.
And, since the Time Capsule does not have a built in modem....you would still need to add a separate modem to the installation anyway.
That's why my suggestion is to use the Verizon device as the "modem" and let the Time Capsule provide the dual band wireless network and of course, handle the Time Machine backups.

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

LabView 6.1 crashes now and then when I try to get rid of an accidential starting connection when using the wiring tool.

Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
How can I stop LabView from crashing in that case?
Thanks for anybodies help!

Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
Thanks for your help!

I can't connect airplay using ethernet

I can't connect airplay using ethernet, it works good using wi-fi, AppleTV 3rd gen, last week I reseted the router after this worked with ethernet

Hi Vijith,
I perform your suggestion and I got an error message.This error message is written below.
Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: 'ConnectionString'. .
There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
Error> occured >Mon May 07 09:18:37,334< >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
<RfcGetException
What's your comment?

I want to connect to the internet using ethernet cable.

I want to use ethernet cable to connect to the internet. I follow the instructions, I am still unable to connect to the internet with the ethernet cable. I want faster browsing and uploads and download speeds

If you have a router connect an Ethernet cable from the cable/DSL modem to the WAN port on the router. Connect another Ethernet cable from one of the router's LAN ports to the Ethernet port on the computer. Open Network preferences, select the Ethernet port and click on the Advanced button. Click on the TCP/IP tab then select DHCP from the Configure IPv4 drop down menu. Click on the Apply button.
Turn off the computer, router, and modem. Wait at least one minute. First, turn on the modem and wait until the status lights indicate connection to your ISP. Second, turn on the router and wait until the status light shows communication with the modem. Last, turn on the computer.
If you do not have a router, then do the same as the above except that the Ethernet cable connects from the modem's Ethernet port to your computer's Ethernet port.

HT1529 how to connect to internet by using Ethernet Cable

how to connect to internet by using Ethernet Cable
I have apple mac book pro with retina display.plz send me the setting thank u

There's no setting. Plug in the cable to the adapter for either USB or Thunderbolt and plug the other end into your router. You can turn off wireless at that point.

My airport is connected to an Ethernet cable and I have created a wifi network but my iPad and I phone can't seem to join it. They just keep trying. What's wrong?? Help!

I have just bought an airport express to connect to the Ethernet cable in my cabin. It's all set up all lights green and I've set up my wifi connection. But when I try to connect my I pad 3 or my iPhone 4 it finds the network but cannot seem to join it. Can anyone help?

Hello Lucy:
As I am not on the ship, I am "fishing" to see if I am able to help.
On the ships (cruise type) I have been on, there is usually a secure "ship" wi-fi network (as well as one that passengers may use for a fee) that needs a password to join.
On your iPad, go to settings and then tap Wi-Fi. What network are you connected to?
When you plugged in your Airport Express, you should have been prompted for settings...including security.
Barry

HP Photosmart 7510 - loose connectivity when using Ethernet cable

Similar Messages

Maybe you are looking for