HP Photosmart 7525: Printing oversize from Mac

Printing from my Mac to HP Photosmart 7525 printer:  Printing emails or items from my computer they always print aboutone third larger than the size onmy computer.  Why, how do I get the printer to print actual size?

Try reboot router and iPad.

Similar Messages

  • How do I set a manual IP address and manual DNS servers for my HP Photosmart 7525 Printer?

    Cannot print.  Had difficulty when printer was initially set up.  Assstance from "happytohelp01" resolved the issue by advising me; a manual IP address andmanual DNS servers for the printer.  I did not write down the information and now my printer is not working (it did work for about a month), now nada.  I initially had problems connecting to the web server - now its doing the same thing, but I don't know what IP adderss and DNS to use.  Please help if you can.
    This question was solved.
    View Solution.

    Hi @LaceyNo1,
    Welcome to the HP Forums!
    I understand that you are wondering, how to set a manual IP address, and manual DNS servers for your HP Photosmart 7525 Printer. I am happy to look into this for you!
    After some searching, I believe I have found the post, that my colleague @happytohelp01, helped you with. Located at this post, Re: Photosmart 7525.
    Hope this is what you were looking for, and have a good day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Installing HP Photosmart C309 printer on my Mac

    Can anyone help me to install HP photosmart C309 printer on my Mac. I thought it had installed Ok, but when I try and print, it says it is connecting and then says there is a communication problem .

    You're very welcome, and that's great news. Now because you were able to add the printer and successfully print from the EWS, it let's us know that everything is set up properly we just need to contact the router manufacturer and have them open up some ports that may be blocked.
    When you contact them please tell them to make sure that the bonjour multicasting is enabled on the router. Now you will need to make sure that the following ports are unblocked:
    UDP: 427, 161, 137, 138,
    TCP: 9100, 9220, 9500, 137, 139, 427
    Bonjour Ports: 80, 443, 5222, 5223
    Once these settings are changed and ports unblocked you should now be able to successfully print to your D110a.
    Let me know how everything works out!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • PhotoSmart 7525 printer/Can't get a code to set-up eprint

    When I try to get a code to setup eprint, I get a message saying I need to upgrade. When I accept terms and tell it to automatically update, I get an error message saying there is no internet connection.
    When I run a report, it says the internet is connected.

    HI ButterflyWV,
    Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services of your Photosmart 7525 printer.
    Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, with screen shots, on how to do this. Please don’t fret that the screen shots are a Photosmart 7510 printer, the steps are the same.
    Have a good weekend.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP Photosmart Premium C309g-m prints wirelessly from Mac & Vaio, but not Dell...

    We bought an HP Photosmart Premium C309g-m about a month ago. It will print from my (old) Mac Book Pro and from hubby's new Sony Vaio, via cable, via bluetooth, and via wireless. We want to add a Dell laptop, and have installed the latest printer software from the HP website.
    When we go to "add a device" on the Dell, the process goes through "Checking network configuration"  and FINDS the printer (we have it set to automatic IP). We select the printer and click Next, the software says installing device and runs netowrk diagnostics without a problem.... and then we get an error at the installing device screen that says "Printer Setup has failed to complete, click Retry to Try again or Next to continue without connecting the printer."
    Very  frustrated! Any thoughts? Thanks in advance for any help. I thought maybe it was a port issue, but we turned the firewall OFF, and no dice.

    You could download and run this very handy utility.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Compatibility of using Photosmart 7510 printer with a Photosmart 7525 printer from the same computer

    Before installing, registering, and setting up my new HP Photosmart 7525 I need to know whether I can keep using my 2 year old HP Photosmart 7510 and its software on my computer and whether this would cause a conflict.  My 2 year old Photosmart 7510 works fine and I want to  use the Photosmart 7510 and the Photosmart 7525 both from the same computer and network without conflict.  And if a conflict would be probable, is it necessary to remove the Photosmart 7510 software before installing the software/drivers for the Photosmart 7525?

    Hi,
    You can install more than 1 printer to your computer. They will share few folders including HP Photo Creations product but they should live harmony together.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printhead / ink issues with 5-month-old Photosmart 7525 printer

    It seems that my HP printer "bad luck" has not changed -- at all! After having lots of issues (and not being able to resolve them with a Photosmart 6515 this summer), I bought a Photosmart 7525 in July.
    I do not print photos or color ink a lot, but when I do, I need for the color and quality to be very good. But it seems that I cannot rely on my HP printer to do that for me. I end up spending hours of time just TRYING to get something to print. I end up wasting a lot of ink and paper, but usually still have a less-than-satisfactory result -- if I'm able to get anything to print at all!
    Two weeks ago, my daughter needed pictures printed for a school project. The pictures started to, print, but then it looked like some of the ink colors were running out. However, the ink status said the ink cartridges were fine! I replaced several of the ink cartridges anyway, but still the photos WOULD NOT print out correctly. I ended up having to save the photos to a thumb drive and take them to a drug store to get them printed for her project. After that, the printer would not even print BLACK ink!
    However, the next day, the printer started printing color again - mysteriously.
    Yesterday, I had some more photos to print. I had the same issue. The first photo printed fine, but after that, only the first third of the photos would print -- the rest were missing part of the other colors. My printer did not show any low ink -- at all. I had all "genuine" ink cartridges, too! I've never used anything except HP ink.
    I am beyond discouraged! I actually talked to an HP rep at Best Buy yesterday, who recommended an HP Envy printer, but it is a tri-color cartridge. He said the problems with 7520 series were because of the way the printhead is designed (really)!
    So I'm ready to just buy a B/W laser printer and give up on ink jets. I wish I could get by without even having a printer at home, but now the schools expect us to print out everything at home these days that they send us via e-mail. Since I end up having to go elsewhere to print photos anyway, maybe I just need to forget about printing photos at home entirely.
    So I will be returning my printer. If anyone has a suggestion on what to get in its place, please let me know. The 7525 was almost $150, so it was not a cheap printer.

    Thanks for your help RnrMusicMan, but I've already returned the printer to Costco, and they did refund my money.
    The printer was only five months old. This is the third Photo"smart" printer I've had major issues with in less than four years. I guess I'm not very smart to keep trying -- or hoping for a different result.
    Unfortunately, I still have a bunch of 564 ink cartridges that I can't use -- some I opened trying to get this printer to work, and some unopened.
    I bought an HP Envy printer on Sunday from Costco that takes the 61 XL cartridges, but I took it back yesterday without even opening the box. My spouse told me I was crazy for even thinking about trying again. And with a tri-color cartridge, it will just be a problem with one color running out.
    So for now, I'll just use our old Kodak printer or plan a little further ahead and have the photos printed outside. Every time I have a project to print, my HP printer does not print for me. I spend hours of time, waste lots of ink, paper and money, and still end up having to go elsewhere to get them printed. So, I just need to do that and forget about printing them from home!
    The HP rep that was at Best Buy suggested for me to return the unopened ink to Wal-Mart for in-store credit. I tried to return two yesterday, but that didn't work. They only exchange ink cartridges, not return them. So, now I'm probably on some list with them, too!
    So thanks for offering to help, but I'm done with trying to make an HP printer work for me at home.

  • All in One Printer C5180 stopped printing/scanning from mac 10.6.8

    Hi
    My All-in-One C5180 has stopped printing and scanning from mac 10.6.8. It had worked for the past few years but after not using it for 8 months (out of country) it hasn't worked since I came back. I have done as a few suggested, carried out a software update on mac and also downloaded a new driver from this site. Neither worked. The message appearing is " printer off-line" and the printer symbol has red exclamation mark. 
    Would really appreciate any help.
    Thanks in advance
    Anne

    Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

  • Photosmart 2710 prints garbage from Windows 8.1 but prints OK from Windows 7

    Photosmart 2710 connected wirelessly to Verizon FIOS router, prints fine when sent files from Windows 7 clients (also connected wirelessly). When sent print jobs from a Windows 8.1 wireless client, printer produces page after page of single lines of mostly graphics characters, with an occasional page of several lines of what appears to be XML.  
    Printer driver was installed using the standard 'Add printer' button on the Devices and Printers dialog under Control Panel.
    I have downloaded and run the HP Print and Scan Doctor, which found no problems, but its Test Page produced the same erroneous behavior.
    Windows 8.1 on Asus X551 notebook, Intel Celeron 1007U x64 processor, 64-bit OS.

    Hi
    Try the drivers from the link below on the windows 8.1 unit
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=4204...
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Trouble with my photosmart 7525 printer

    I recently moved and am trying to set up my HP photosmart 7025 printer.  It says the ink carriage cannot move (but it can) because of a paper jam (I can't find a paper jam) or it gives a message that one or more ink cartridges is missing (none are) or is damaged.  How can I tell which cartridge is damaged?

    Hello there! Welcome to the forums @dunnellon 
    I noticed your post about the different errors  you're noticing on your Photosmart 7525, and I have some ideas for you!
    There are 3 guides/links I would suggest for you. Please try the steps in the guides:
    A 'Carriage Jam' Message Displays for HP Photosmart 7520 e-All-in-One Printer Series
    A 'Paper Jam' Error Displays on the HP Photosmart 7520 e-All-in-One Printer Series
    Ink Cartridge Problem: An 'Ink Cartridge Problem,' 'Incompatible Ink Cartridge,' or 'Ink Cartridge F...
    If the troubleshooting does not help at all, I would lastly suggest technical support.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printing via a Print Sever from MAC OSX 10.5.2

    Hello all,
    I recently purchased a powerbook, (i'm loving it!), and have got a D-Link wired print server that is connected into my network, (DP-301U).
    I have a pc with xp pro and a laptop with Vista on -both of which i can print successfully from via the print server.
    Regards the mac, no such luck and I'm at my wits end with this now!!! -the instructions that cam with the print server are confusing and of no help, and I've yet to find any conclusive answer on the internet.
    When adding the printer in all the various ways I tried, the printer either says "printing" and nothing happens or it comes back with a "Communication Error", or when I try use the Generic Mac driver reams and reams of garbled writing are spewed forth from my printer!!!-arrgh!!
    Can someone please provide the guidance I need to get printing from my MAC?, it's probably someone really silly that I'm missing?
    Thanks and regards.
    Lobby.

    TCWolfe wrote:
    I still have a problem with the new Imac. I did the same installs and chose the foomatic printer from the list but still do not see the two sided option and the printer freezes during the spooling with say, 21% completed. Sometimes it is 21% other times 55%, but no printing begins. What might cause the spooling process to stop cold? Any ideas?
    This sounds like a communications issue between the print server and the iMac. It would appear from your first post that you are using the LPD protocol to communicate with the print server.
    Items to check:
    1. If used the same printer queue when you installed the new drivers, you should quit open applications and restart them. The applications will not pick up the new driver until they are restarted.
    2. Double check all the configuration settings on the new iMac. Make sure they match the printer settings that you use on the other Macs. Are the printer address and queue name the same?
    3. Look at the Firewall settings. Open the Security preference pane in System Preferences. Click the Firewall tab. The radio button for "Allow all incoming connections" (not recommended) or "Set access for specific services and applications" (recommended) must be selected. If the radio button for "Allow only essential services" is selected, outgoing signals to the print server are being blocked.
    Matt

  • Network Printer Problem from Mac to Windows

    Hi all, hoping someone can help. I have a Canon MF4350d printer which is shared on a windows machine. I can access the windows machine, I have installed the latest drive for this printer onto my mac, from the canon website and when i go to print I get the following:
    Canon UFR ll Printer Driver
    An error occurred.: -50
    Then the printer icon starts jumping and when i click on that I see the following under status:
    On Hold(Authentication required)
    I have yet to print from this macbook to a networked printer. Very disappointing.
    Anyone have this issue? Anyone know of a working fix? Thanks Guys.

    If you search within this forum (search block, upper right), you will see that PAHU has answered this several times. For example, search for "UFRII windows."
    Printing on OS X isn't quite as simple as on Windows - quite often, manufacturers provide drivers that are limited to the comm protocol "they want you to use," and Windows Printing (SMB) is usually not one of those. In fact, most USB printers get USB-only drivers.

  • Photosmart 7520 print photo from iphone to plain paper

    I have a photosmart 7520 and I would like to print picture from iphone and bypass photo cartridge and print on standard paper. Thanks

    Hi,
    I'm not sure that you'll be able to bypass the photo cartridge as the plain papaer print will use the same colours.
    In order to get the printer to use plain paper instead of photo paper the best approach would be to use the HP e-Print app as the inbuilt Airprint has limited paper size/source options.
    I've included a link on how to setup e-Print here: http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html... 
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Printing pdf from mac, works once then printer offline?

    I print wirelessly to a Brother HL-2270DW from a macbook pro running OSX 10.9.2 When printing from pages, numbers, email etc it works properly but when I print a PDF using adobe reader 11.0.07 it works once and then I can't print again, printer status is changed to offline.  I contacted Brother first and this was their reply...
    Thank you for taking the time to write to us about your HL2270DW. We will look into PDF issue for you.
    Since you have stated that the model is able to print fine from other applications, but is unable to print from PDF, the issue is isolated to ADOBE.
    The issue is not related to the model or the drivers because the issue would occur all the time with all programs.
    We recommend contacting ADOBE for further support.
    If after reviewing the information you have further inquiries about the PDF issue, please reply and we will be happy assist you.
    Does anyone have a fix for this?

    Hi chocolatebabz,
    Thank you for posting on the Adobe forums, kindly try printing as an image. Try the steps mentioned below.
    1) Open the file>Print>Advanced
    2) Check the box>print as an image.
    Thanks,
    Vikrantt Singh

  • Error setting up HP Photosmart B109n for wireless from Mac

    I am trying to configure my B109n for wireless printing but the setup utility keeps crashing.     Printer is USB connected but I want to move it to another part of the room.  I am runnin OSX 10.9.2.  
    Process:         HP Setup Assistant [8324]
    Path:            /Applications/Hewlett-Packard/*/HP Setup Assistant.app/Contents/MacOS/HP Setup Assistant
    Identifier:      com.hp.SetupAssistant
    Version:         2.3.12 (2.3.12)
    Code Type:       X86 (Native)
    Parent Process:  launchd [163]
    Responsible:     HP Setup Assistant [8324]
    User ID:         501
    Date/Time:       2014-04-02 12:58:57.895 +0100
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Anonymous UUID:  CD4CC37E-A4CF-B07A-F990-87DC5CF774FD
    Sleep/Wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    Performing @selector(performContinue from sender ACMCustomButton 0x3592b0
    Dyld Error Message:
      Symbol not found: _WirelessIsAvailable
      Referenced from: /Applications/Hewlett-Packard/*/HP Setup Assistant.app/Contents/Plugins/WiFi Confirm Settings.WiFiPlugin/Contents/MacOS/WiFi Confirm Settings
      Expected in: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    This question was solved.
    View Solution.

    Hi PaulEich,
    Welcome to the HP forums!!
    I see from your post that you have a Photosmart B109n that you need to connect wirelessly to your Mac that is running 10.9. I will absolutely do my best to assist you with this!
    I believe the reason the software is failing is because it's not intended to be used with the 10.9 operating system. At this time HP does not have full feature software released, you would have to install it via the Apple Updates. Which leads to the next issue, how to connect the printer to your wireless network. To do this, we will have to connect the Mac to the printer to get things setup properly
    Please follow this post I did, that has worked for others, to get the printer connected to your wireless network. To restore the network defaults on your printer, please press the Setup option, then Network, then Restore network defaults, followed by Yes. Then to print off the Network Configuration page on your printer please follow the steps below:
    On the control panel, touch the button ( ) next to Scan . The Wireless/Scan menu displays.
    Touch the button next to Wireless Menu .
    Touch the button next to Wireless Settings .
    Touch the button next to Print Network Configuration Page .
    Touch OK . The Network Configuration Page prints.
    Let me know how this goes for you!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for