HP Photosmart 8000 A809 problems W2k8R2 print Server Spooler

Hello everyone,
we have 4xHP Photosmart 8000 A809 installed on your print server,
they use the same driver version. Also on the print server there are a few more printers installed.
Sometimes when someone print something on the "Photosmart 8000" the CPU of the print server runs @ 100%,
and anything can be printed. After a restart of the spooling service everything is fine.
Is that a known issue? (newest driver version is used)
kind regards

Sorry that you are having a problem with your printer spooler.
That is a issues with Windows issue. You can look at the link below and see if this will help the print spooler error.
http://www.youtube.com/watch?v=MgHpoNZgbvQ
Let me know if this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Similar Messages

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Problem with Printing from Spool

Dear Experts,
I am facing the problem with Printing, Once i press the Print button, the spool is generated. But Instead of giving one page, It is generating the more than one page. Some times, the last page its getting is blank. I am confused how this happens.
Kindly solve my issue, this happen frequently.
Thanks & Regards,
Srinivas

Dear Siva,
Everything is ok in SPAD. This happen for few process order for COPI transaction.
Regards,
Srini

MSI RG54GS2 - problem with print server

Hi,
I have router MSI RG54GS2. Everything works correctly. If I connect printer to USB on router then my router works only 10 hours and then it freezes. If printer is not connected, router works fine without freezing.
I tried to use new firmware, but it doesn't solve my problem.
What should I do, please?

So, I tried it. Router works correctly without freezing but only via cable :( . If I try to connect via WiFi to my NETWORK, then my notebook and PDA find SSID and that's all. Widows show formular that everithing is connected correctly, but internet and lan network doesn't work. If I disconnected PRITER from router, then noteebok and PDA could connect to internet and local network.
:( I have only trouble with this router :> .

Photosmart D5160 connected to Router (Printer Server Feature), properties ignored

Hi everyone,
I'm here to describe my problem.
I have the printer Phothosmart D5160 connected via usb cable to usb port of my router (Proprietary Router of Telecom Italy) for using it in among my home network PCs and laptops.
The problem is that, printing in Windows 7, if I set some properties for the printer (for example Low Quality Print or Manual back and front printing), even if the dialog windows correctly reports the options set, when printing the printer ignores everything.
How can I solve this?

Hi TiD91
I understand the printer is connected to the router by a USB cable and will print except when changing the printer properties.
The issue you are having would be bidirectional communication.
Go to start, devices and printers, right click the printer, left click printer properties, click on the ports tab.
Make sure Enable bidirectional support is checked.
Connecting a USB cable to a router may or may not work and can be intermediate.
This printer's connectivity is USB and Bluetooth capable by using the wireless printer adapter.
The USB connection was intended for a direct connection to the computer.
Here is a document for setting up Bluetooth.
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro 8000 A809 - can I print just black and have empty color cartridge?

I saw in a previous post entitled "PSC 1410 - can I print just black and have empty color cartridge"
that the printer does color underprinting even when printing black and white, to prevent bleeding.
My question is, is this also true when selecting the grayscale printing option in the printer properties dialog box?
I installed the printer using an ethernet connection to a Dell Inspiron 8200 laptop computer running Windows XP Professional

Yes you will still need the color cartridge. The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Adding a Print Server

Hello,
I have a WRT 300N Wireless Router and plan to install a print server.
Is there any special settings I have to perform manually since the print server is a D-Link DPG 321?
My actual set-up is working fine. ( no problems at all).If I isntall this print server will I start having problems?
Any help will be appreciated.
Thaks
Eris

There is no such special settings however you need to configure the D-Link Print server same as the Linksys router ....
The wireless settings in the Print server should be same as in router ....
Connect it with the router ......connect the printer also to the print server ....
Run the setup disc .... it should work....
After installing the printserver you can disconnect it from router & use it wireless ....
As your network is already established there would not be any problem installing Print server ..........

HP Offiejet Pro 8000 A809 prints carbage when using network connection on Windows Server 2008

We are using HP Offiejet Pro 8000 A809 on our network, and they are installed on a Windows 2008 Server.
But when we are sending a print command it prints only garbage. We've tried different print drivers but without success.
Anyone experience the same problem and have a solution?
Thanks

temporary solution from HP is to use the standard HP Deskjet 990c driver.
it works but i hope they make a proper driver.

2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

Printing problems using a print server

I am having trouble printing across my local network to some printers. This is a mixed wired and wireless LAN.Lan works fine as the windows machines print with no problems.
Printing takes place using a Trendnet TE 100-P21 Print Server. This box is connected to my network with a CAT6 cable. It has 2 USB and one Parallel port.
The Mac can print to the parallel printer with no problem. Installation was easy and painless. It found the other two printers (the USB ones) just as easily, installed drivers, etc. It even knows when they are idle or not.
_It can print to the HP 6L, which is the only one that has a parallel connection._ (I think that must be important)
_But it can’t print to the other two, both of which have USB connections._
Here are the Queue Names that the Mac reported. (In the below notations, P3 denotes the parallel printer port, U1 the first USB port, and U2 the second USB port on the print server.)
HP6L (parallel)
URL: dnssd://PS-700AED-P3._printer.tcp.local.
*Cannon i9900* (USB)
URL: dnssd://PS-700AED-U1._printer.tcp.local.
*HP ColorLaserJet 3500* (USB)
URL: dnssd://PS-700AED-U2._printer.tcp.local.
Windows machines on the network can print to all three printer with no problem, so we know printers, print server, network and cables work. When hooked up directly to the printer (at least the HP 3500) the Mac can print as well. But not when connected via the print server.
Eventually the job times out and the HP 3500 spits out a page that reads
PCL XL error
System: KERNEL
Error: IllegalTag
Operator: Vendor Unique
Position 8
Any thoughts?

I assure you that changing print server will not fix this issue. You MUST have a CUPS driver to print to a non-postscript, not-intended-for-network printer via the standard comm protocols available in OS X and on nearly all print servers. The Gutenprint drivers included by Apple are CUPS drivers, as opposed to the old Mac-style "monolithic" drivers.
* It is true that using a postscript driver to print to a postscript printer would work for the TrendNet as well as nearly All other print servers. Postscript is the native output (well, along with "packaged postscript" = PDF) of OS X, so a postscript driver IS A CUPS driver by default.
I hope this helps you avoid the hassle of buying another brand of print server, only to find out out it is the same.

HP Photosmart 1315 won't print through print server

I had this working for the longest time though I forgot which settings I used I am pretty sure I got it right, IP printer, using gimp photosmart 1100 and what not and it worked. recently i had to change the ip address range so i deleted the printer and reinstalled it (since i couldnt find where i change the ip its connected to).
anyways, it won't work. it says it is busy or if it eventually does print, prints garbage.
i even tried the HP drivers, though it won't find the printer when i specify the IP address.
i have a linksys wireless g router a linksys wireless g print server though i connect via cable and the mac is connected through cable. this works fine on my winbox and i cant get it to work again on the mac. any suggestions would be most helpful!

HP's drivers are written to use USB only - won't help.
Queue name is part of the address for the LPD and IPP protocols. If you don't remember using it, maybe there is another protocol that works on that print server and I just didn't see it in my quick review of the manual. For example, the HP Jetdirect protocol doesn't need a queue name (called raw port 9100/socket printing in most manuals).

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Getting font problem for printing form in Production server.

Hi experts,
We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
Can any one suggest me on this issue.
Regards,
Sagun Desai.

Hi sagun,
Please check the spool request generated on production server using tcode SP01.
Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
The printer connected to the test server might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
Hope this helps.
Regards,
Subodh

HP Photosmart 8000 A809 problems W2k8R2 print Server Spooler

Similar Messages

Maybe you are looking for