HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

My printer model:
HP PHOTOSMART ALL-IN-ONE 5510 B111A
Problem:
Printer goes to sleep mode. After 25-30 minutes the wireless connection between the PC and the printer breaks. Blue Wireless light is on even at the sleep mode and I can see that the printer is connected to my router and there is internet connection. HP Print and Scan Doctor sees the printer but I cannot awake the printer unless I restart it.
What I have tried so far:
I have tried all the solutions hp.com offered including; reinstalling driver, updating printer software, setting static IP to printer, setting static DNS servers, using HP Print and Scan Doctor.
I have seen people asked about this question before and there was no solution. I really need HP help!
This question was solved.
View Solution.

Let’s try this. Verify in the printer that 'Auto Off' is disabled. Set a static IP in the printer outside the DHCP range of the router. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest. Set router to 20Mhz only, or 145Mbps depending on router. Always use WPA2-AES encryption. Power off both. Power on router wait 3 mins. Power on printer and verify it reconnects to router. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam. About a month ago there was a paper jam, but was removed. It worked fine since then until yesterday. I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem. The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam." When the problem first started yesterday the message was that the printer was "Out of paper." I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out. Thanks for any suggestions!

Hi there pattimessick,
You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP CN245B Photosmart all in one wireless e-printer B110a HAS DISAPPEARED from my computer?!

Please help this Techno-phobe!! My printer is no longer listed in Devices & Printers (so, obviously, will not print!). Went to HP Solution centre & found a download that is supposed to fix this problem - specs included Windows 7 64bit (which mine is) - downloaded, saved, then went to run it & it came up with a box saying "Not intended for Windows 7"??!!! Have re-run the set-up CD, tried turning off my firewall, all with no result. Went to e-mail HP support, but they cannot find my registration (I did register the product & have the e-mail confirmation to prove it!). It's Sunday, so no telephone support - I have lots of printing I need to get down......can anyone help in words of one syllable please?!

Mitramonday wrote:
Thanks for that - I followed your link, but even when choosing 'Printers' option, it kept taking me to Desktop stuff, so have just put message in 'Other'???
I have no idea what you're doing then, the link goes right to the Printers section, there's no "Other Desktop" options which is found several levels higher at http://h30434.www3.hp.com/t5/Desktop-Computers-Monitors/ct-p/DesktopPC

How do I get my HP photosmart all in one C4580 to print all pages?

My printer will print a one page document, but will only print the last page if more than one page. I have uninstalled and reinstalled the driver and still no change. I have windows 7 and have been using the printer up until about a month ago when it started this problem. What can I do to correct this?

Eric Root
Thanks for that. Yes I did see that in my chasing around, but it would be nice to have it the other way round as a default. I understand why it is done that way, but I rarely, these days, have large documents to print and the right way round would be useful! Particularly when occasionally, as I say above, I want to double side print which the HP doesn't do as a norm! C'est la vie!!
Cheers
altv

How do I reset my HP photosmart all-in-one B210a to print page 1 first?

My printer is apparently all set up, but I want to change the print sequence from reverse order to starting at page 1. I have the latest HP software installed, but there is no where I can see of changing the sequence. I have been in to System Preferences/Printers and whilst it brings up my printer I can not carry out any changes to its' default sequence of operation.
Is there a screen that I can get open that will allow me to set orientation and to print in normal order? I can do it an application, but that is a pain because If I want to print something off the Internet and there are more pages than two, it will print page 2 first. The knock on effect is that sometimes I want to print double sided and the only way to do this sensibly is to do each page individually then re-feed the page and do the next page. This afternoon, I did that, printed page 1, then printed pages 2 and 3, and ended up with page 3 on the back of page 1 because it printed in reverse order!
Thanks
altv

Eric Root
Thanks for that. Yes I did see that in my chasing around, but it would be nice to have it the other way round as a default. I understand why it is done that way, but I rarely, these days, have large documents to print and the right way round would be useful! Particularly when occasionally, as I say above, I want to double side print which the HP doesn't do as a norm! C'est la vie!!
Cheers
altv

6310 all-in-one won't print!!!!

6310 all-in-one will not print--after reload of driver...driver is up to date---still won't print!!!

What operating system? Does the Officejet 6310 still make copies correctly?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?

I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle. It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.

Hi,
Printing via Bluetooth from an iPad is not possible due to iOS limitations, as Apple did not include the Bluetooth printing protocol in the iOS.
If your printer is HP Photosmart C7200, you may use the HP ePrint Home & Biz App to print from your iPad through your home network
However for the Officejet 7200 your only option is to look for any available 3rd party printing solution from the App Store.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

Hi,
I can' see it in this list (updated last week). Please check it yourself again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air. When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported. The HP site has not been helpful in resolving this issue. My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem. The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

HP Photosmart All-in-One C4494 printer

Where can I download a driver for my HP Photosmart All-in-One C4494 printer model Q8396B? Thanks

Hi,
As it is a member of the C4400 family:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c01369673
Please use the following link:
http://support.hp.com/us-en/product/hp-photosmart-c4400-all-in-one-printer-series/3655558/drivers
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Photosmart all i one 7520 Printing problems the wrong scale the printout

I will print covers for DVD cases. Have done it before from two different programs to my previous photosmart printer without problems. Now since I change the Photosmart All in One 7520 will be reduced format in both height and width. A degradation of the picture takes place.

Hello there @AgnetaL
Welcome to the HP Forums!
I understand you are facing some issues when printing DVD cases from your Photosmart 7520.
I would recommend checking the printers specifications, as this unit may support different sizes, paper types, etc than the previous printer did.
Here is the link for you to get to the: Printer Specifications for the HP Photosmart 7520 e-All-in-One Printer Series
If there is still an issue, let me know which programs you have tried printing from, which paper size and type you are using, and which troubleshooting steps you have tried already.
Have a great Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

Similar Messages

Maybe you are looking for