HP Photosmart C 5280

Mac mini computer using 10.9 will not use all functions of the printer. The computer will not recognize the scan function. Is this a Apple problem or do you no longer support the printer using 10.9? Do I need a new printer scaner?

Hi buddypa,
There is no full feature software available from hp.com for your Photosmart and Yosemite. However, if you install the HP Printer Driver Update ... either via Apple Software Update or from Apple website ... you should have a Scan option within the Printers & Scanners.
Here is also a document that explains how to install HP products without HP Full Feature Software: Installing the OS X v10.10 Yosemite HP Printer Driver from Apple Software Update
And this document explains how to scan in Yosemite: Scanning in OS X v10.10 Yosemite Without HP Software
Best regards,
Mandy
Say "Thanks" by clicking the Thumb up in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own

Similar Messages

Hp photosmart 5280 all in one

I just installed a new black ink casrtridge and I get an error message THE ALIGMENT OF THE CARTRIDGE FAILED .. i intsallerd again but keep telling e same error meessage Please help

Hi Edgardsm,
I understand you have a Photosmart C5280 that is giving you an error stating the alignment has failed. I will certainly do my best to assist you with this.
I would recommend that you follow this 'Print cartridge alignment failed' Error Message Displays on the All-in-One document as it should be able to help you clear this issue. If not please also ensure that your printer is plugged directly to a wall outlet to ensure the printer is getting enough power to function properly.
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Scanner function of HP Photosmart C5280 does not work on Mavericks

I have upgraded to OS 10.9. I can print normally with my HP Photosmart 5280 but cannot scan correctly. The scan function seems to start correctly but the document created cannot either be saved or printed (in fact the document saved is a grey page with dark lines). When I initially installed Mavericks, I installed the printer update, and no other update is available.
My other printer, an HP Desjet 3050 J610 now does not even print or scan. What do I do?
PS: I went from Snow Leopard (10.6) to Mavericks (10.9)

http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

Hp aio remote app on iPhone won't scan to my hp photosmart 7515

hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my network

Hello @mbranch37,
Welcome to the HP forums.
I understand that you are having a problem with the AIO app, as well as what sounds like a web services issue.
I would like to help.
Before working with the app, I would like to make sure the printer is fine.
On the front panel of your printer touch the Web Services icon. (also known as the ePrint button)
If you get a server connection error, I would set a manual DNS.
The following post by happytohelp01, has instructions for setting the manual DNS.
If for some reason the printers email or ePrint address has changed, you will have to set it up again.
If the email is the same and you do not get any error messages, try cycling your network.
Turn off the printer and other network devices.
Unplug the power to your router for at least a minute.
Plug the power cord back into the router.
Turn on all your network devices.
Wait until the blue wireless light on your printer stops blinking.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Photosmart c309a- 'The wireless radio is not functioning, contact HP support'

My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
Wireless on PASS
Wireless working FAIL
and everything following that stated as 'not run'.
Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
So the question is, is this a hardware fault, and if so what can be done about it?

Hello,
Yes, it is an hardware issue and indicates that the Wireless card is not functional.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How can I print to hp photosmart all in one 7280 from ipad

How can I print to hp photosmart all in one 7280 from ipad
This question was solved.
View Solution.

Hi,
Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
you may find the steps to get and use the app in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart Premium All in One Blue screen error B882B1C4

I have recently purchased a Photosmart Premium All in One C309G machine which is connected via a USB cable to the PC. When I try to use it wirelessly it produces a blue screen with an error message B882B1C4 as soon as I switch on the BT hub. HP haven't been able to sort out the problem as I am now in receipt of the 4th replacement . Can anyone suggest a solution please? I have a BT1800HG wireless hub connected with an ethernet cable to my HP PC.

This is posted in your separate thread:
Hey there. I would try a power reset to fix the issue.
Press the Power button ( ) to turn off the product.
NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the back of the product.
Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
Connect the power cord to the electrical outlet.
Connect the power cord to the back of the product.
Press the Power button ( ) to turn on the product.
If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp photosmart plus driver no longer working

Hi all I have a photosmart plus came with an hp computer bundle used to work. Now every time I go to try and make it work the following happens while installing the driver.
a the driver installatiion stops/never completes
b the driver installation can not see the wireless network or the printer when i plug in the usb cable, even though the computer sees the printer through the usb port and I can print through the usb port.
This is on 2 computers the same crap I have no idea what to do. I can not get the drivers to install and the only way I can print is by physically plugging the printer to a computer via usb and letting windows find it.
Please help this is a giant pain in the ass.
Fattyz

Sorry, I should have asked this earlier, what version of Windows are you using?
Since I don't want to waste too much more of your time with you waiting for me to reply, I will go ahead and give you two links of troubleshooting steps that I would recommend trying.
The Progress Bar on the Software Installation Stops or Stalls
'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer in Windows Du...
The first one addresses the issue of the software not completing. The second, even though the title might not seem like an issue that you are having, addresses the issue of the printer not being recognized by USB.
Try those and let me know if either of them work. If they don't, get back to me with your version of Windows and I will see if I can find anything else to help you resolve your issue.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IMac printing problem with HP Photosmart 7150

I've just bought a 27 inch iMac and I'm having problems printing out of iPhoto 9. I select for eg, 4 X photos per page and it prints about 10% of the page before spitting it out. I've downloaded the latest driver for my HP Photosmart 7150 printer (Gutenprint v5.2.5) but still no good.
The print monitor window always says it is printing Page 1 7%. Weird.
Any ideas?? Thanks in advance.
Dan

I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
I am only able to print in draft mode which is not suitable for anything I need to do.
I realize this printer is no longer officially supported, but any help would be appreciated!
Thanks,
Mike.

10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Printing problem with hp photosmart 8180

The printer dont print in plack, although the cartridge is new.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Printing problem with HP Photosmart 5510

This is not really a Mavericks problem but I was hoping that someone out ther who owns a HP Photosmart 5510 all in one printer may know the answer. All was working fine up untill I (foolishly) changed the printing mode to economy black & white and now I can not get it back to printing in colour. Anyone know how to do this please?
Sorry that this is not a specivic Apple problem but I am desperate!
Cheers.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP PhotoSmart 7510 suddenly has severe connectivity issues

I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!

I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not.

HP PhotoSmart 6520, Printer offline, Wireless printing from Windows 8.1 and others

My parents own an HP PhotoSmart 6520. They have 3 or 4 computers. 1 Is connected to this printer via USB cable. 3 Are "connected" over wireless. The printer has the latest firmware updates according to checks from the printer front display.
Problem is this:
1) When first starting the printer, and the printer gets on the wifi network, all wifi-available devices can print to it over wifi. We are also able to browse to the printer config web pages to see status, and change configs as needed.
2) After about 5 minutes of printer inactivity, all wireless clients can't print to the printer to print, and can't connect to the printer's web page. (The printer appears to be offline to each OS that uses WiFi to get Internet access.
3) If we visit the printer control screen, physically attached to the pinter, find the network configuration, and choose to "turn off" wifi at the printer, then after off, "turn on" wifi and see an IP address get assigned, then all WiFi machines can print to the printer over WiFi. However, after 5 minutes, again, the printer is offline. No matter what or how much each WiFi-based machine sends to their printer queue/spool, the printer remains offline.
4) If the USB-connected machine prints to the printer over USB, the printer once again becomes available over the wireless network.
The work-around is terrible. (Cycle WiFi access every time they need to print from Wireless devices.)
Things we have tried:
1) This is running the latest firmware according to the WebService section request to check for upgrades. They are on the latest according to the results. (no help)
2) DHCP was the initial config for network settings. I moved to a DHCP server configuration with static IP served by printer MAC address. (No help)
3) I switched to totally static IP address, thinking it might be a DHCP lease-time/renewal issue, or custom vendor string issues or bug. (no help)
4) Enabled/Disabled IPv6 even though they are on a NAT-ed network with only IPv4 support. (no help)
5) Visited printer config with web broswer, and change energy saver setting from "5 minutes" to "15 minutes" because the ~5 minute window seemed like an approximate time limit. (No help)
6) Enable/Disable other settings through the web and restart the printer. (No help.)
7) Suggestions listed here: http://support.hp.com/us-en/product/HP-Photosmart-6520-e-All-in-One-Printer-series/5169038/model/516... (No help)
In testing this, with static IP or not, from other machines, when we can print over WiFi to the printer, the IPv4 address is ping-able from peers on the network. After ~5 minutes pass, and the pinter goes "offline" there are no ping replies to the static or other IP address assigned to this printer. By all accounts, when the printer is "offline" it really is no longer on the WiFi network. Meanwhile, oter devices can ping each other. (All computers, smartphones, tablets, etc can all respond to ping.)
None of the other devices suffer from dropped access to the WiFi and Internet.
Suggestions?
I do not have access to this right now, but I can walk my parents through whatever steps are needed to resolve this.
Thanks!
P.S. Other things tried:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/If-your-printer-drops-off-your-network/...
1) When online, generating report, reports online
2) When offline, report reports that it is still associated with access point
3) Printer is about 2 feet away from the access point it is communicating with and has max-bars showing signal strength.
4) Channel allocation for WiFi was selected based on least used channel, and works very well for all other devices on this channel.
5) There is only one accesspoint with the name it associates with.
6) The only options for power-saving "auto-off" we see via web pages from printer are: 5 minutes, 10 minutes, and 15 minutes, and changing to 15 minutes does not allow the printer to remain online for 14 minutes -- it still goes offline to the network after ~5 minutes -- even agfter changing this settings and power cycling the printer.
7) No wireless extender is being used.
8) We tried static IP, Dynamic IP, and statically assigned DHCP served IP.
Once printer is "offline" when visiting printer to tell printer to disable WiFi access, then re-enable it, all machines with items in their printer queue/spool *immediately* de-queue/de-spool their printer jobs to the printer.
This is the closest description: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Photosmart-6520-goes-off-line/td-p/324... Where is that patch?

Hi @TheSynAck,
I see you are using a Hot Spot, I believe we have found the reason for the connectivity issues. There may be a setting that needs to manually configured for the Hotspot to 'allow' your printer access. Also, hotspots may have limitations and restrictions that may cause connectivity issues.
Take a look here: Setting up the Printer as a HotSpot, it shows a Laserjet but the same steps apply.
Keep in mind that Hotspot connections are 'best effort' connections due to the issues of inconsistencies within the connection. They are not routers. Therefore, you may experience issues in the future when using the Hotspot for your connection. Usually a powercycle or hard reset of the HotSpot will resolve such issues.
I would not recommend getting another Hot Spot as the connection is not guaranteed, you could however try a Wireless Router if you are looking to upgrade anyways.
With the PS 6520 you also have the ability to print using the HP Wireless Direct printing option. Please click on the link below to get started:
HP Wireless Printers - Printing with HP Wireless Direct
I hope this gives you a better understanding of the intermittent connection issues.
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Photosmart C 5280

Similar Messages

Maybe you are looking for