Hp photosmart c310a will not power on or have any power to the screen..?? help!!!

printer worked fine this morning - have already tried other power cords -which i know work - the green LED light is active on the power cord but there is no power to the printer itself.  screen is black, power button doesn't turn on anything at all..
have had this for about a year and says the warrenty expired (of course!)
HP All in one printer - C310a -- model CN503a
mac - 10.6.8
thanks for your help.

I agree 100% - I have the same printer with the SAME problem
HP will you GIVE us a NEW or REFERB printer that WORKS..
DO YOU HAVE ONE???...
Your FIRMWARE is what screwed these printers up and YOU KNOW IT..
I think I'm going to put in a BBB complaint - I am OVER HP updating our printers with FORCED FIRMWARE updates, Printers that work for A WHILE, then QUIT
I'm TIRED of PULLING the plug on this CRAP, I'm getting an EPSON, If I don't get a FREE REPLACEMENT from HP, I think a printer should print more than 1200 PAGES!!!!!!!!!!!!

Similar Messages

  • Hp photosmart 6510 will not power up. it worked fine yesterday

    hp photosmart 6510 will not power up. it worked fine yesterday

    Hi there beeef72,
    This article has troubleshooting for your printer not turning on. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
    1. Take off bottom case
    2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
    3. Press and hold power button for 5 seconds
    4. Plug a charger in, and it should start booting up
    5. After shutting down again, reconnect the battery and close the case up
    6. It works! (hopefully, if you guys had the same situation I did)

  • My macbook air 2010 will not power on, the charger light does not come on at all either. help!

    my macbook air 2010 will not power on, the charger light does not come on at all either. help!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • My ipad will not turn on when I plug it up, the screen light will occasionally blink

    my ipad will not turn on when I plug it up, the screen light will occasionally blink, thank you

    First, make sure that it's fully charged.
    Then, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

    I choose Adobe Reader XI to open a GPX file. It will not open it how do I get past the screen that says it will not open it to choose something else?

    http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7
    or
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  • Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Hi my trackpad is frozen and I also could not get force quit to work, I closed the top down and now I cannot get past the login and the cursor will not move, does anyone have any ideas

    Try these two steps:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

  • Photosmart C310-will not power on

    My printer has been working fine & all the sudden will not power on.
    I unplugged everything & let it sit.
    The power source has a green light & I have tried multiple outlets.
    Tried to unplug from the printer & make sure it was secure & clean.
    Any suggestions?

    Hello joyjadyn,
    Based on the information you provided it seems to me that it is an Printer Hardware problem.
    But you may try the  below steps and hope it works fine...
    Unplug the Power cord from back of the printer and Power outlet / power strip
    Plug in the Power cord directly to Wall outlet by-passing the Power strip if any.
    now Plug in the Power cord to back of the Printer.  And then Press the ON button on the Printer.
    The printer should power on.
    If the printer is not Powered on, then check the Power Adapter light ( Black rectangular Box ). It should be Green in color. Also touch the Power Adapter. If the Power Adapter is WARM, then there could be an issue with the Power CORD, that goes from Power Adapter to Pritner and it has to be replaced.
    If the printer does not Power On, then i suggest you to call HP Tech Support  for further assistance .
    If the Printer is In-Warranty the support would be FREE , else you'd be Charged for the support.
    If you are in US , the toll free # is 1-800-474-6836 .
    If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HT4528 my iphone will not power on - the battery and morphie are fully charged

    My iphone is fully charged as is the morphie but it will not power on.  The battery strength button on the bottom shows all four lights.  I have pushed the sleep/wake button on the top, I have pushed the home button but nothing happens - the screen remains black

    Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • MacBook will not power or charge! HELP ME!

    My MacBook was working great last night. I was watching a DVD on it and the battery started to go low. I closed it up and layed it down and went to bed. I did shut off DVD before closing it up. Safri might have still been on I am not sure. Either way I wake up to a dead battery, so as always I plugged in the AC to watch my movie, but the light on the AC will not even light up. I even took the battery out and still it will not Power on. I cleaned and put battery back in and still NOTHING. No chargeing up, no powering on. My computer just will not power on at all. I had this happen to an iBook, but it finally came on after taking the battery out ten or more times and just kept pushing the power button. But, I've tried all morning and I can't get anything to happen with this MacBook. Am I suppose to hold down a key or is there a way to reset the computer? It was working great! Not one problem EVER. Not even a shut down or locking up....nothing. Not. One. Problem. Please HELP ME!? I'm guessing the battery went completely dead and forced the computer to shut off....but why will it not cut back on? I'll give you the BIGGEST (((HUG))) if you can help me! -Aimee ;o)

    Yea. They call themselves a "genius," but that they are NOT! Some are so clueless and only want you to buy a new computer. Theres gotta be a better way. Sometimes I think APPLE put a little device in their computers and after five years it blows up and kills the computer so your only option is to buy a new one. I"M NOT GIVING UP!!! LOL!

  • My i pod touch 4th gen will not power up. the battery is fully charged and the computer doesn't recognize that it is plugged in. What should i do

    my i pod 4th gen will not power up and the battery was fully charged about 5 days ago. it just won't come back on and the computer doesn't recognize that it is plugged in. what should i do? i tried to call apple and they wanted 30 dollars just to talk to me

    Have you tried a reset?
    Are you able to restore?
    iPod touch User Guide (For iOS 5.0 Software)

  • Macbook Pro will not power on the Display.

    Just turned on my Macbook Pro, heard the powering-on chime, but the Display will not turn on. Battery is fully charged. I attempted the various restart options. Pulled out battery. Reset. Reset Pram. But still no display. Please help with any further tech support or trouble shooting steps.

    I have had this sometimes - the screen goes black. When you turn the machine on, hold tap the "screen brightness" button a few times. (That'll be the button 3 in from the top left on the keyboard with the sun icon on it).
    HTH

  • The wifi button has went to the off position and will not come back on. Any suggestions?, The wifi button has went to the off position and will not come back on. Any suggestions?

    The wifi button has went into the off position and will not come back on. Any suggestions?

    which button where?

  • My send button on the iMessage screen will not function. I have tried it in every screen position ie. rotated the screen 90 degrees each time. With no results.  Any suggestions?

    My send button in iMessage does not function. I have tried it in every position ie rotated the screen 90 degrees each time but still will not send the message.  Any ideas or sugestions?

    Try this:
    First you can try signing out messages and then back in.
    Make sure IOS is updated to latest version
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • In sounds my email notification is stuck on minuet and although I change the sound it will not budge. does anyone have any idea how to fix this problem

    This is very infuriating as the sound will not be changed. Does this mean I have to do a system reset.

    https://discussions.apple.com/message/23673157#23673157
    Check above discussion link here in the Apple support discussions. Hope it helps!

Maybe you are looking for

  • Vibrating and whirling noise whenever I load a new song?

    I just bought a new 30GB video ipod from Costco and I've noticed that whenever I choose a new song, I can feel my iPod vibrating in my hands and I can hear whirling and clicking sounds inside of it. Basically I can distinctly hear my iPod loading the

  • Modifing actionable email body

    I am able to configure the actionable emails in the BPEL. So as soon as the task appears in the human task, the email is sent to respective user's email id with the actions in it. User just has to click on the action and the email will be sent to SOA

  • How to duplicate in CC 2014

    Just downloaded the new CC 2014 and can't figure out how to duplicate layer groups or really anything. Getting a few new windows about a displacement map. Help?

  • Issue Playing SCORM Content on iLearning 5.0b

    Hey there - anyone else have an issue playing SCORM content on iLearning 5.0b where you have a version of Sun JRE later than 10 and the "Enable next generation Java plugin" setting in its control panel checked (which is the default on install)? We ex

  • I have a new Mac book pro

    help, I have got a new Mac Book Pro and my wife has my old one. I want to compltetly change the details on hers so it does noes not think it is still mine !! I want to change the auto address fill option when filling out forms. I have altered the det