HP Photosmart C3135 "Not Printing right with Gimp-print for p1000"

Hi I am having trouble using my HP PhotoSmart C3135. First I will explain how it is set up.
Wireless Setting's for Macbook - Mac 10.4.8
HP Photosmart C3135 - Connection "bonjour"
Print using "HP Photosmart P100 - Gimp-Print v5.0.0-beta2
Wireless Setting's for Hp Laptop - Windows Xp Home
HP Photosmart C3135 - Connection "bonjour"
Print using "HP Photosmart C3100 Series"
Corded Setting's for Macbook - Mac 10.4.8
HP Photosmart C3135 - Connection "USB"
Print using "HP Photosmart C3100 Series"
The Macbook wireless does not print with photo options, All pictures are dark and some Printed text is bigger than on USB or HP Laptop.
The Hp Laptop Wireless Works Great With Printing. But the actual software that is installed does not pick up the printer. Though I have not tried everything Yet to get the software to pick it up.
On the Macbook with Bonjour
I go to add printer well it Auto-SeIect's the driver "HP All-in-One 4.0"
So I click Add. Then Error:-9672 comes up. So I had to Click Hp in the list then I click HP PhotoSmart P1000 Gimp-Print.
On Hp I went and plugged the printer in
Went to "Control Panel"
Printer's and Fax
Went to the side panel Clicked "Add Pinter"
Went through the setup and had to put the disc in.
Software came up as "HP PhotoSmart C3100 Series"
then downloaded "Bonjour for Windows"
Plugged in the Printer into My Airport Extreme/with Built in Dial-up-Modem
Then opened up Bonjour went through the setup
Print using "HP PhotoSmart C3100 Series"
Then Deleted the USB HP PhotoSmart C3135
And kept the Bonjour HP PhotoSmart C3135
Well I had to do it this way because the "Bonjour" printer list did not have the hp driver.
Does Anyone know how to add the "HP PhotoSmart C3100 Series" Driver to the Mac list.
Please Help

I gave up for now

Similar Messages

Photosmart 6520 not printing black.

I'm using wireless printer Photosmart 6520, not printing or copying in black. Replaced with new cartridge and still
Does not work.
This question was solved.
View Solution.

Hi @Mtimmer
I see you are having troubles with your black ink.
Please ensure you have completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages. Although I hope this resolves the issue, it might not. As you have a 6520, If the issue persists, I would suggest calling HP Phone Support even though the printer may be out of warranty as you may require a replacement printer. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know if the document resolves the issue, or if you called HP and the outcome of the call. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp photosmart 7510 not printing photos

1- hp photosmart 7510 not printing photos in the e mail contents .. only text printed and empty paper with evry print order .... why ?????
2- I need to know how to print any photo using A4 Paper size in thr main tray with out prompet to insert photo paper in the photo tray ... Please help

by the way I am using Ipad

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

Do I understand correctly that I have to buy the new version for $149.00?
You can upgrade for $79.
Products

Photosmart 3210 not printing with full black cartridge.

My photosmart 3210 has had 2 new black cartridges installed and the display acknowledges they are full. However, it refuses to print in black. I have cleaned the heads, successfully aligned the printer but black is still missing from anything I print including test pages. All the printer does is print the black bits using a combination of other inks, which usually results in a in a wine colour. Please could somebody help me.

JenBrock...did you ever get a solution? I am having the same problem and have tried all the same troubleshooting options with no sucess. I also tried to calibrate the color and the background color on the grey squares did not print nor did the black numbers that corrispond to each square print. Help please...Anyone?!!!

Photosmart C6280 not printing color/both sides with Mac

Hello HP Community,
I have a Macbook Pro running iOS X 10.9.2 and a AIO Photosmart C6280. I am have downloaded the printing/scanning software and drivers. Everything installed without problem. I have also scanned with no problem. However, no matter what program I am trying to print from on my Macbook, the printer will not print in color and also will not print on both sides - even when the double sided feature is checked off.
I have been to all the discussion forums of relevance and can't find anyone with my same problem. Those that have similar problems, are running different versions of iOS and the steps suggested they take are not possible with this version. Please Help!

Hello HP_USER,
Welcome to the HP Forums.
I see that you're unable to print in color from you Mac 10.9.2. I will try to help you with this.
Have you tried making a color copy from the printer? If not please do so, this is to see if the printer is having the issue stand alone.
I would also recommend looking at these documents:
Missing, Faded, or Dull Colors
Wrong Colors
As for it not duplexing, according to the User's Guide, this printer doesn't duplex as in it doesn't have a duplexer. If you are manual duplexing that would be slightly different, as it requires you to be flipping the page after the first side has come out. This document can assist you with that: Print on Both Sides of the Paper (Manual Duplexing)
I hope this helps you out, thank you for posting on the HP Forums.
I worked on behalf of HP.

Photosmart D5360 Not Printing

Below is a copy and past of a previous post. Forgive me for posting the same question twice. I didn't know if yesterday's post would be eligible for today's expert advice forum. Here is a small update. I am on my way out to get a new printer cartridge, although I doubt if that is the solution. I really need this printer to work in order to print resumes for my job hunt. If I don't have any luck with the forum, I guess I will have to spend $37 for phone support. I can't really afford it right now, so I've got my fingers crossed and will check back later.
Printer: Photosmart D5360
Model Q8361A
Problem: This happened after I tried to reinstall the printer after not using it for several months. The printer behaves like it is going to print, it says it is printing, but nothing happens. It will print a test page, but not a diagnostic page. It will not print a pdf or anything from MS Word, or Wordpad.
My computer is a Dell Studio 1536 laptop with Vista Home Premium.
I have uninstalled and reinstalled 7 times, so I am sure I am doing it correctly and not connecting the USB too soon. I tried it with another USB from another printer. So I don’t think the cable is defective.
There is no flashing warning message on the front of the printer. No cartridge obstruction, no paper jam.
I have run the diagnostic utility, it detects no problem.
It is selected as the default printer, USB001 virtual printer port for USB.
When I try to print a test page from the Properties dialogue box, it doesn’t work.
Note: I doubt if this is relevant, but I should mention, the black ink is empty, although the cartridge is still in. I didn’t want to buy another cartridge until I find out if the printer can be fixed.

Thanks for trying to help with this Wixma. Here are the results.
I took out the black cartridge and attempted to print a word doc. First the solution center came up and told me the printer was offline. I plugged the USB into another port and it told me the cartridge was not available. Then it proceeded as if to print, but didn’t. The Windows Driver Software Installation popped up and told me it was installing drivers (I don’t know why because they are already installed). Then it tells me it is ready to use. Meanwhile, the printer status says it is printing, but it isn’t. I cancelled the print job, and installed a new black HP #74 cartridge. The printer prompted me to align. I pressed “okay”. When the printer is ready, I attempt to print the doc again, but with the same results. I doubt if the color cartridge is clogged, because I was able to print test pages when I installed it.

Photosmart 3210 not printing

I have a photosmart 3210 wired to a Netgear router. The printer and router are located upstairs. Downstairs I have a HP Envy 17. For a couple of years I have been printing to the HP printer. I just purchased an Envy Phoenix 810-170st. It is located upstairs next to the router and printer. The Envy 17 is a 64 bit computer as is the Envy Phoenix. Both computers are wireless.
I used the installation disk for the printer and the drivers were not recognzed by the Envy Phoenix 810 so I used Windows to update the drivers and the printer was recognized.
When I print the Envy Phoenix sends the material to the Photosmart printer but after a few minutes it gives an "error" and won't print. Since I had no problems setting up the Envy 17 running Windows 7 and the new computer is running Windows 8.1, I am sure it is something I am not doing right. What do I need to do to get the Envy Phoenix and the Photosmart printer talking to each other?
Would appreciate any sugggestions.

Hi Bueno,
Thanks for the detailed description of the setup - it'll help a lot with troubleshooting.
From the looks of it, everything is still setup correctly, as the Envy 17 still works. So it means that the connection is still okay, just the printer software on the new computer is having some troubles getting through.
For starters, can you please try running HP's Print and Scan Doctor. I'm curious to see if it can detect the printer. If it can, please continue, and select "Fix Printing".
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Photosmart 7520 not printing

My Photosmart 7520 is printing blanks after just getting its ink changed and also printed its ink report right after perfectly fine. What is going on? I need help ASAP. I have a final due in two days!

Hello @bambiklaire001,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the blank pages printing issue that you're experiencing on your HP Photosmart 7520 e-All-in-One Printer since replacing the ink cartridges. At this point this issue may be due to defective cartridges or a Printhead issue within your Photosmart printer. The Printhead is the mechanism that the cartridges fit into. It controls 'reading' the cartridges and putting ink on the page. If the Printhead is defective than the print system within your product is a defective and a replacement Printhead may be needed. With that being said, I am going to run you through some troubleshooting steps to see if we can get this printer functioning properly again for you. I am going to have you start troubleshooting by printing a Print Quality Report from your printer to verify if all cartridges are experiencing this printing issue or if the issue is being caused by one specific cartridge.
How to print a Quality Report:
Load plain white U.S. letter or A4 size paper in the input tray.
On the printer control panel, touch the Settings icon ().
Touch Tools, and then touch Print Quality Report. The printer prints the test page.
If this report prints perfectly: than the printing issue that you're experiencing is not being caused by your printer. Rather, it would appear that something on your computer is causing the blank pages to print. If you're using a Windows computer can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
If this report prints with quality issues, or missing colours/black: than the printing issue that you're experiencing is being caused by your printer. To resolve this issue can I please have you click here. Once the support document opens please run through Solution one, Solution three, and Solution six. This includes any sub-steps under the listed Solutions.
If your printer is failing to print one colour or black, please replace that cartridge. If the issue persists after replacing the cartridge than this it is most likely the Printhead causing the issue. If your printer is Out of Warranty you may want to check out the helpful post by @Bob_Headrick Black Ink Not Working. The steps will walk you through manually soaking and cleaning the Printhead mechanism. Only run these steps if your printer is Out of Warranty as the troubleshooting steps will void your Printhead warranty.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Photosmart premium not printing correct colors or contrast on photo paper.

My HP Photosmart Premium does not print correct colors or contrast level on photographs using photo paper. This happens with using most any application and setting the paper type to one of the photo papers... By using MS PhotoAlbum and selecting the photo tray then forcing "regular paper", I can get a somewhat decent print (this trick only works with MS PhotoAlbum). When I setup to any of the "photo paper" types, I do not get correct colors or contrast levels (even if the print preview looks good).
I have the same issue with 8.5 x 11 inch photopaper. Unless I select "regular paper" as the paper type, I get incorrect color and contrast (even if the preview looks good). The ICC "Color Profiles" look to be OK (at least the titles are correct).
Anyone have any ideas?

Try the troubleshooting steps in this page. My bet would be the Photo cartridge (the black with the bow tie symbol) is out of ink. This is only used when photo paper is selected, for plain paper printing the regular black cartridge is used.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart 8250 not printing in true colors

I replaced the Magenta ink cartridge on March 26, 2011. Ever since I have been getting shades of magenta for my printing. When I print an email with graphics on it the header information will print in black but the graphics will not print in the true colors. I uninstalled the software and went to the HP web site to install the most update software. But to no avail. I also did a reset but that did not help. Any suggestions on a solution will be appreciated.

Hi
Please perform the below step on the printer touch screen
Please perform the below step on the printer touch screen, while you performing the steps both keys are invisible or not lit up
(http://ecx.images-amazon.com/images/I/81KY%2BvZACkL._AA1500_.jpg)
Touch Reverse or Undo arrow key (Bottom Left)
Touch Little home icon (Top Left)
Then touch Reverse or Undo arrow key (Bottom Left)
Again touch the Reverse or undo (Bottom Left) Buttons, in sequence.
You will see support menu listed on the printer touch screen
Touch Support Menu.
Press Right arrow for Reset Menu and Touch OK.
Press Right arrow for Parital Reset and Touch OK.
Wait for unit to Power Down/Turn Off.
Press Power button to turn the Printer On.
Select Engligh language and USA Country -- select Yes to print alingment page -- select yes to setup if the printer is connected wireless, select Printer -- and go thru the process.
Regards
Justin
Say thanks by clicking the Kudos Star in the post.
If my post resolved your problem, please mark it as as Accepted Solution : )

Photosmart 6510 not printing black

I'm having issues with my Photosmart 6510 All-in-one. It won't print black ink. The ink level says it has ink in the cartridge. I've tried running the clean printhead and Align printer apps to no avail. I replaced the cartridge. Still nothing.
What gives?
Running on an HP P6310Y Pavillion PC with Windows 7 Home Premium

Hello VideoBandit,
Welcome to the HP Forums.
I have done some research and I suggest we try this document that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
Please feel free to write me back if you are still having issues or if you have any additional questions.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Photosmart 2575 - not printing text

Hi, I have just4 inherited a Photosmart 2575 dating back from 2006. I loaded the Drivers from the installation disc only to learn that they were not Win7 compatible so got the compatible ones online and followed the installation as indicated. I need to print a text document and nothing comes out. However, if I print the test page for alignment of the printer head as well as the head cleaning page .... it prints perfectly ( minus the text ). It prints a scanned document perfectly also. However, any WORD document comes out blank. WHY ? I would be extremely grateful if someone could help me please. ....

Try the troubleshooting steps in this document. Does the test page print properly? If so there is an issue with the driver settings. If the test page does not print black I would suggest removing the black cartridge and soaking it nozzles down for five minutes in hot water, then blotting the printhead gently with a damp tissue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart 6510 not printing in black

My 6510 recently stopped printing in black. (It is out of warranty.) I have tried most of the ideas posted in this forum, including multiple cartridge cleanings, deep cleanings, and various reboots. As with another poster, when I try to realign, the printer consistently fails after the blue cartridge.
When I did my last couple of test prints, I notice that if I put the text in very large print (72 or bigger), black text will appear in faint grey. Other text on the same page is not visible.
Any more suggestions?

Hi 1979hydepark,
Thank you for visiting the HP Support Forums! I see you have recently changed the black cartridges on your HP Photosmart 6510 and are not able to print in black. You have cleaned the printhead and also tried the recommedations on the Forums with no success.
I would like you to complete ALL step listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, please follow the troubleshooting steps in order, even if you have already previously tried the recommendations.
Let me know the outcome, if you are still not able to print in black ink please reply back with your Country/Region as well as your Warranty Status- Click here to find out
I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart 6520 not printing color

All cartridges were printing fine until I replaced the black 564 with a 564xl. Now all I get is black. The printer shows the ink levels in the color cartridges are over half full, I checked all the cartridges to make sure they weren't plugged, I reseated all the cartridges, ran "clean printhead," still no color. Do all the cartridges have to be an "xl" or can I use a mix? Now what? This printer is barely a year old.

Hi @Sandy16 ,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Photosmart C3135 "Not Printing right with Gimp-print for p1000"

Similar Messages

Maybe you are looking for