HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

HP Photosmart C3180 all in one printer. is there a driver that will enable this printer to read SDHC cards.

This is a limitation of the USB hardware on the C3180 which will not read SDHC cards.
Maximum recommended memory card size: 1 GB (solid state only)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?

I use an iMac running V. 10.10.2. I have an Epson WP-4530 printer. Is there a printer driver that will enable one to print photos from color negatives?
I have already tried downloading the drivers from Epson as per one person's suggestions, but the dialog box isn't anything like what was suggested--the choices in the box weren't the same for the most part. I don't want to lock up the computer or disable the printer for normal printing, but I have a lot of old negatives that I would love to have prints from.

I am using the latest software from Epson for Mac OS 10.10.2 that I downloaded last week. I seem to remember that the older software (we're talking 6-8 years ago) had to option to scan slides or negatives and would convert the results into positives via the scanner. I don't like the most recent scanning software because it jumps right into the scan before giving you a chance to change the options. It uses the selected options from the previous scan which are sometimes right, sometimes wrong. Thanks for your reply to my question!

Is there a link that will fix this Error Code: U43M1D204?

Is there a link that will fix this Error Code: U43M1D204? I need a link or a simple one-step solution.

Click here and then view it in the Mac App Store.
(113486)

My 4s is not compatible with my car stereo. Is there a cable that will fix this?

My JVC KD-AHD69 worked great with my 3GS. It does not recognize my new 4S. The stereo is not updatable. Is this a dock connector pin out issue? Is there some adapter that would fix this?

Hi there dcjoe,
A lot of places carry the cables you are looking for. Though your area may vary I have found them in places like radioshack and wal-mart. Here is a google shopping link to get you started. Let us know if this helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I need an Ipad app web browser that will emulate internet explorer as my MLS real estate system only uses internet explorer. Why is Atomic full version not available in the app store is there another browser that will do this

I need an iPad app web browser that will emulate internet explorer as my MLS real estate system uses only internet explorer. Why does Atomic no longer sell the full verison. What web browser can I use?

Probably none. It's very possible that the reason the MLS required Internet Explorer is that they use technologies (such as Active-X) that are proprietary to Microsoft and so would not be available from the iPad even if a browser will report itself as being Internet Explorer.
You can try iCab Mobile, though, and see if it will work for you:
http://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8
It has the ability to identify itself as other browsers, so if the site is only blocking other browsers and not depending on IE's technology, iCab might work. There could be problems, though, even if the site lets you in.
Hope this helps.

Can Firefox be a global object or is there a script that will enable reuse of a Firefox browser window? We are doing it with IE (Global ie as object) but I and others prefer Firefox.

A macro script, that is used very often by many workers, opens a new Firefox browser every time it is used. We want to reuse the Firefox browser window if it is already open. We have a script that does this with IE, but... well, it's IE.
== This happened ==
Every time Firefox opened
== We tried to make our macro work with Firefox

Kevin, there are a few questions I can answer, but if you have irc you can also reach out to the #addons channel. I will also try to get in touch.
As far as I know:
* Starting point: [https://developer.mozilla.org/en-US/docs/Developing_add-ons Developing Add Ons: MDN]
* [https://developer.mozilla.org/en-US/docs/addons.mozilla.org_%28AMO%29_API_Developers%27_Guide/The_generic_AMO_API AMO API ]
* [https://developer.mozilla.org/en-US/Add-ons/Plugins/Gecko_Plugin_API_Reference/Plug-in_Development_Overview Registering Plugins and Developement Overview]
*[https://developer.mozilla.org/en-US/Add-ons/Overlay_Extensions/XUL_School/The_Essentials_of_an_Extension Install.rdf file info for extensions]
''Is there a way to find the GUIDs for these other browsers: K-Meleon, Waterfox, Firefox Nightly (we are guessing the Nightly builds use the same GUID as Firefox) so that we can add the appropriate information to our install.rdf and update.rdf files or does one need to get in contact with the respective projects to determine these?''
I do not know. There are generating GUIDS [https://developer.mozilla.org/en-US/docs/Generating_GUIDs]
Be right back. I will try asking for backup.

Is there an app that will enable me to use emoji or emotions while using a bluetooth keyboard?

I have a Logitech keyboard and while I love this keyboard/cover - I just realized - I can't find a way to access the installed Emoji app I have like when I use the on-screen keyboard. When I'm using my bluetooth keyboard does this mean I have to give up Emoji?
Thanks in advance for any help.
Carol

Hi CarolV.,
Are you using a separate App, or the Emoji keyboard built into iOS6?
Although I don't have a Logitech Bluetooth keyboard, I tested with an Apple Bluetooth keyboard, iOS6, built in Emoji.
I was able to bring up the onscreen keyboard with the Eject button (upper right above the delete key) and using the onscreen keyboard I was able to press the World key to switch to the Emoji onscreen keyboard. As the Emoji "keyboard" is so graphic (switching images and selecting them) I had to use the onscreen option to select the desired Emoji.
Once the onscreen keyboard was visible, I could also change between keyboards with "Command - Space" on the Bluetooth keyboard.
So the questions become, does the Logitech keyboard have a media eject key? and does it bring up the onscreen keyboard? If not, does any other function key bring it up?
Let me know if that works. Like I said, I don't have a Logitech keyboard so I wonder how universal these options are.
ivan

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

Is there a tutorial that will help in creating a RS232 driver?

I am attempting to write a driver / VI that will control an Animatics "SmartMoter" via a RS232 port. I was able to download sub VI's from www.summerfiles.com.
Is there a tutorial that will help in creating a driver for a RS232 port? I take it that I will need to connect these sub vi's in a correct sequence to be able to communicate through the RS232 port.
Thanks,
Bill

It seems that what you downloaded is a driver. What you need to determine is how to use the functions on the driver to create a high level application. There is a tutorial at http://zone.ni.com/devzone/cda/tut/p/id/2804 that might be useful. The driver you downloaded is lacking in several areas. One of which is documention. Each VI should include a description of what it is and what it does. Each control/indicator should also include a description. I could not find any such information in these VIs. I didn't look at everything because the horrid front panel colors in the SmartMotor.llb was giving me a headache. I did see a VI called SM Tester. This appears to be a high level example that you could use as a model.

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

Is there an application that will open and view MS publisher?

Is there an application that will open and View MS Publisher files?

Afraid not. You can run Windows on your Mac then run Publisher in Windows. You can find out then if Publisher can export in a "standardized" format other applications might import.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Need advice re: Lightscribe drive that will work in Mac Pro

I have the stock superdrive in my Mac Pro upper slot. I had a three year old LaCie 16x Lightscribe Drive that I took from my G5 and installed it in the lower slot. I could not get the MacPro to recognize it. I triple checked the cable connects, tried Cable Select and Slave jumper settings, installed the latest LaCie system extensions for the drive, but it still will not recognize it. It does not show up in Disk Utility or anywhere else.
So.... I bought the Lite-On DH-20A4H08C drive from Amazon. Put it in (Cable Select) mode, and the Mac Pro recognized it right away. The problem is that the tray in the Lite-On drive sits too low in the chassis, and when ejecting, it catches on the drive door of the Mac Pro - sometimes it can get out all the way under it's own power, sometimes I have to pull it out. It retracts pretty much OK. I'm not into the stress that this misaligned drive is putting on components, so I plan to return it.
Can anyone recommend an IDE Lightscribe Drive that will work in the Mac Pro and where the tray will eject nicely through the seemingly slimmed drive doors on the Mac Pro? If not IDE, can I use a SATA Lightscribe Drive? I understand there are two SATA ports on the motherboard beneath the back of the optical drive enclosure.
Looking for some positive experiences here please?
thx -b

Well, I found the fix! I ditched the Lite-On and continued fiddling with my better fitting LaCie drive and I found that the LaCie drive has to be in the upper bay (i.e. first in the chain) for it to work. The SuperDrive had to be moved to the lower bay (last on the chain). I have no idea why this is, but swapping positions causes the LaCie drive to be invisible to the Mac Pro. Of course, both drives are set to Cable Select. Even LaCie tech support (which was very responsive BTW) were scratching their heads.

I have an iphone 4s, I installed Vtok but the video chatting part of the app is not working when I try to chat with my husband through gmail on his PC. Can I fix this or is there another app that will let me chat with my gmail chat contacts?

Vtok video chatting is not working on my iphone 4s. When I try to do a video chat with my gmail chat contacts who are using a PC we each only get the voice part of the chat and no video. Is there some way to fix this or is there another program that will let me video chat with my gmail chat contacts? Thank you.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

I am looking for a map app that will allow me to place pins where my clients offices are on a map and keep them save every time I open the app. Does anyone out there know of an app that will do this?

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

Similar Messages

Maybe you are looking for