HP Photosmart C4380 All-in-one won't network print

I ran the test, and my wireless radio is not working. i just wanted to know my options and where i stand.
is it possible to fix or do i have to contact hp etc? I bought it sometime in 09, so it shud be within warranty if i can find it.
thanks ,

First I would reset the printer.  Turn it off, unplug power from the back of the printer (not the wall), wait 30 seconds, plug in, turn on.
Now reset the Network Settings:
1. Press the Wireless button on the front of the HP All-in-One.
2. Press the button next to the icon on the display until Restore Network Defaults
is highlighted, and then press the button next to OK.
3. Confirm that you want to restore the network defaults.
Run the Wireless Network Test again.
If you registered your printer, HP will have the purchase and warranty date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HP Photosmart C2780 All-in-one won't work with Image Capture

    I want to use Image Capture as the scanning software but it won't connect to my scanner (HP Photosmart C2780 All-in-one). When I go to browse devices it shows the scanner but when i click on "Use Twain UI", nothing happens, and it is supposed to ask me if I want to connect. I believe that I have followed all of the instructions correctly but nothing is happening. Does the HP Photosmart C2780 even work with Image Capture? and if it does what am I doing wrong?

    Install the HP Drivers from HP.
    I installed V9.7.1 from the HP website:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55650-2 &lc=en&cc=us&lang=en&os=219&product=3204785&dlc=en
    This provides 'Hp Device Manager' which will scan images or do OCR on text pages....

  • Photosmart 3310 all in one won't print.

    HP diagnostic tool says everything is fine, but my photosmart 3310 all in one just won't print. Using OS Vista 64

    Hi ljwzx,
    Can you print the self test page from the printer?
    How to print a self test page from the printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00409857&tmp_task=useCategory&cc=us&dlc=en&jump...
    I am not sure which Diagnostic utlity you used previously. I have included the two which should assist with your printing issue. Try the Print Diagnostic utility first.
    Print Diagnostic Utility:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
    Network Diagnostic Utility:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-96434-1&cc=us&dlc=en&lc=en&...
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Photosmart 2610 All-in-One, Manual Two-Sided Printing, HP e-mail support Ticket no: 8028153835

    HP e-mail support, Ticket no: 8028153835 
    I purchased my HP Photosmart 2610 all-in-one printer in 2005. It was previously installed on a HP Laptop, Windows XP, and all the features worked.
    It is now on a PC running Windows Vista Ultimate 32. When I tried installing the printer software CD, it wouldn't load because of the Vista OS. I then loaded the HP Photosmart 2600 series full feature printer driver (Vista OS compatible) from the following HP website link:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47754-1&lc=en&dlc=en&cc=us&...
    Now I cannot get the Printing Preferences to allow Manually Duplexing (two-sided) printing. This option was available on the original printer software.
    I've tried the solutions on: HP Image Zone Help / Two-Sided Prints which indicate:  Click the Finishing tab / In the Document options area / select the Print on both sides check box (this box is not available).
    When I run the printer from the Control Panel as Administrator, the printer Properties / Device Settings show Manual Duplexing: Enabled.  When I go to the printer Properties / Advanced / Printing Defaults, neither the Finishing / Print On Both Sides check box is available nor will the Printing Shortcuts tabs allow the Print On Both Sides option to appear (only shows Print On Both Sides: Off).
    HP e-mail support told me to install this patch to correct the problem:
    http://h10025.www1.hp.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=mp-69848-1&cc=us&lc=en&...
    When I try installing the patch, it won't load because it wants the original CD software. So I'm back to my initial problem of trying to load the original printer software that won't load because the CD is for Windows XP OS. I am at an impasse between the Software CD that I have, and what is available on the HP website.
    What is your solution?
    This question was solved.
    View Solution.

    cschmidt41 wrote:
    I use Windows 7 Home Premium 64 bit and the Deskjet 6500 is not one of the choices. Any subs?
    Also, if it were, do you download the driver?
    The driver is supplied through Windows Update.  Go to the Devices and Printers folder, Add a Printer, then select Windows Update.  It will take a few minutes to update the list, then the Deskjet 6500 series will be a choice under HP (not Hewlett-Packard).
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Photosmart Premium All-in-one c310a - How to print in black and white

    I want to print a color pdf file in b&w on my HP Photosmart Premium All-in-one c310a printer. When I go to "features" -> color options -> grayscale -> in the drop down box, there is only one choice - "high quality". There's no "black ink only" choice as I have seen in forums on similar printers.

    If you have the full feature drivers installed for this printer and there isn't a Black Ink Only option under Print in Grayscale, then this printer lacks the feature.  Typically the Black Ink Only options follows the drivers for some deskjets and most officejets, because of the office environments they are intended for.  Where as Photosmart printers are more aimed at printing photos. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Can't connect Photosmart 7510e all-in-one C311a to network for updates-new install-Windows 7 32 bit

    During installation of new printer and wireless e-print set up (Photosmart 7510e all-in-one C311a) I was asked to use printer to check for updates but I am getting error "printer is not connected to a network". I have printer connected to laptop via USB. Laptop have active wireless connection, Windows 7 Pro 32 bit. Please advice.

    Hi mjf11,
    Sorry you are having trouble. Here is a link to the HP Network Diagnostic Utility, which should help you resolve your network connectivity issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&lang=en&lc=en&product=507...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How to install All-In-One software with network printer?

    I plugged my 7310xi into my Linksys WRT54G router. In Windows 7 64-bit I found the printer, installed the default drivers, and it's printing happily via the network.
    But I need to install the HP All-In-One software if I want more advanced functions like scanning to my computer. 
    Downloaded the software from the web. During installation I get to the part where it asks me to choose how the printer connects to the computer. I select "through the network," click next,and it just keeps on kicking me back to this screen and I can't proceed. Any ideas?
    Here's the error:
    Now Launching=X:\hpzdui40.exe -I XXX -f X:\DIVins??.DAT
    fail to load library X:\hpzscb01.dll
    CNetworkUIPlugInApp::InitInstance fail to initialize sacabod. Result = o;
    GetLastError = 193
    RUN: Driver UI Plug-In exits returning 50
    Exit code=50
    I've set it to run in Vista compatibility mode and Run as Admin.
    Message Edited by fuzzybabybunny on 08-06-2009 11:59 AM

    I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

  • Photosmart 5510 All In One won't print black

    One week ago I copied an A4 page and it worked. Last night, I tried to copy something and I realised that the printer has black ink issues. At first I thought that the printhead is dry so I did a printhead clean without any results. Then I thought that the cardrige may be empty, so I filled it, and then I did a printhead clean again. Neither this time. And then I saw that there are other people that have the same problem. The question is: What to do now? 
    I use the original cardriges that came with the printer and some good ink. It is the first time since Nov 2012 when I have this problem with the printer.

    For the Photosmart 5510 the troubleshooting steps in the document here may help.  Especially make sure the vents are cleared.  If that does not resolve the issue then resetting the printer as described in the post here may help.  If this does not resolve the issue then read the entire thread here and try requesting reset instructions.
    I am concerned about your comment "good ink".  If you have refilled the cartridge there are various possibilities that could damage the printhead, including air in the supply or printhead, incompatible ink and a host of other issues.   
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Photosmart C7280 All-In-One won't recognize new black ink cartridge

    Black ink was very close to running out, purchased a new one and replaced it. Now whenever I try and print something I get a popup that says: "Install new black ink cartridge if available. To continue with other colors, press Continue. Black color will be simulated. Text and photo quality will differ from those printed when using all cartridges. If empty ink cartridge is not replaced soon, all printing will stop. To cancel, press the Cancel button on printer."
    I've tried turning it off and back on, taking all the cartridges out and putting them back in, etc. I printed a test page and black prints just fine, but whenever I try to print from Ctrl+P I get that error. How do I solve this problem?

    Thank you for your updated information.
    Since you are able to print from you computer and the printer isn't indicating this message, then I would recommend uninstalling the software. I will provide a HP document here to help you. (If this printer is connected by a USB cable, then please remove it from the computer.)
    Next, please clean your Temp folder on your computer. I will provide a document on performing this step here.
    Now, install the full feature software from the HP website here. Make sure you choose your correct operating system; Either 32 bit or 64 bit. I will also provide a HP document on Installing the Printer software; Either USB or Wireless Connection.
    This should remove this error message you are receiving. Please let me know if you are still receiving the same message.
    Looking forward to hearing from you.
    I worked on behalf of HP.

  • Hp photosmart premium all in one -won't let me AirPrint

    I have today bought this printer, which according to apple and HP is AirPrint enabled. I've installed it, I've checked for firmware updates and it works fine with my laptop and the eprint function. However, my iPad and iPhone can not find it and so I am unable to use the AirPrint function. My iPad and printer are both using the same wireless connection, so what's going wrong?

    Laura,
    There are quite a few trouble shooting steps in my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0]. But to cut to the chase, first make sure you can run one of the Apps on the Printer and its getting content. Then make sure the firmware is the latest (Tools->Web->Automatic Updates->Check for Product Updates). Then power cycle everything (Router, Printer, iOS device). If it's still not working, more likely then not its a problem with your wireless router and Bonjour, so post back what brand of router you have, the model, and how your network is configured.
    Just trying to help.
    Andrew

  • Hp photosmart premium all in one won't print avery labels?

    HI, When I put a sheet of labels in (avery templete 5160) the printer spits out the label page and prints the info on regular paper? I don't see any place to  change paper to 'labels' on my printer.  Does someone know how to fix this? thank you and Merry Christmas.

    Laura,
    There are quite a few trouble shooting steps in my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0]. But to cut to the chase, first make sure you can run one of the Apps on the Printer and its getting content. Then make sure the firmware is the latest (Tools->Web->Automatic Updates->Check for Product Updates). Then power cycle everything (Router, Printer, iOS device). If it's still not working, more likely then not its a problem with your wireless router and Bonjour, so post back what brand of router you have, the model, and how your network is configured.
    Just trying to help.
    Andrew

  • HP Photosmart C6180 All-in-One won't print magenta or light magenta, even with new cartridges

    The printer suddenly stopped printing magenta and light magenta.  I installed new cartridges from LD, which have always worked in the past, but none worked.  No error messages.

    Hi there @Optical32  and welcome to the forums
    I read about how your Photosmart C6180 is no longer printing in light magenta and magenta, with no error messages. I'd like to offer my suggestion for you that may help.
    Click this link and try these steps: Color Mix or Missing Colors on the Diagnostic Page
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I need a replacement rear door for my hp photosmart c4380 all-in-one series. the one we have broke.

    Have not been able to locate it on HP Part website.

    No sorry there is no such function.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP Photosmart C6300 All in one series is not printing

    I have replaced all cartridges, and gone through the troubleshooting program for Ink System Failure with no success.
    I have the HP Photosmart 6300 printer. I need your help.
    Loreen Brigham

    Hello Loreen,
    Can you try printing a testpage by pressing Setup»Tools»Printer Status Report. Please scan this page and add it to your post by clicking the insert/edit picture button, so that i can have a look at it.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Hp photosmart 3210 all-in-one - some colors not printing even after changing cartridges.

     I recently had an issue while printing a document. the content was off colored and the error message said black was low. Changed the black cartridge and things just got worse from there. Still no black, cleaned the printheads, printed another test page and no longer had magenta or lt magenta. Replaced those as well. the only had yellow, magenta and lt. magenta.  yellow was low as well, so now every cartridge has been changes.Tried to print document again and it printed in magenta and lt magenta. never have seen black again and the self test diagnostic page is printing in purple. What should be black showed up as purple with lines and yellow is a rainbow of mustard, magentas and purples. no other colors show up. WHAT IS GOING ON? have tried several times to align the printer but it always fails. Have cleaned the printheads several time and just get a mish-mash of colors  (no black) and most of the time no writing. When I try to print in black only, I get nothing.
    What can I do? It worked just fine prior to ink going out.

    Did you get a resolution to your problem?  The same has occured for me - only printing blues/yellows and greens.  Was working fine until I replace the yellow cartridge and then it stopped printing reds.

Maybe you are looking for