Hp photosmart C4780 error message when saving scan to MAC OS X 10.9.5

Error msg: Error has occured saving file because it could not be written to. Check properties for the file to make sure it is not read-only. System freezes at this point.

Hello sun4u,
I apologize for the delay in my response time.
I have done some more research in to the issue at hand and I have found some additional steps that we can try.
I suggest that we go ahead and take the steps to Reset the Printing System.
Once the Printing system has been reset, let's go a head and download the HP Printer Drivers v3.0 for OS X.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Error message when saving a PDF to PNG: Error attempting to write file.

I get an error message when saving a PDF to PNG. JPG and TIFF works, but no PNG.
Disk space is sufficient! 100GB of 250
A few weeks ago it was no problem to save as PNG. But now! (Perhaps from last update?)
Messages:
When clicking "Ignore":
Adobe Acrobat XI Standard
Version 11.0.09

I have this issue too, but my colleagues do not have this issue(we have same Acrobat Pro 11.0.09). I am sure this issue happens only you updated to 11.0.09, because when you use Windows Restore back to 11.0.08, no issues.

Error message when initiating scanning

I got an error message when trying to scan today (don't know why as scanning has been fine until now) which upon using HP's diagnostics gave me the response below. My problem is that the link to the solution no longer works. How and where can I find the download it says I need to install?

Hello @BobR44,
Welcome to the HP Forums!
I understand a message appears stating the driver is missing when trying to scan a document. I will do my best to assist you! First, I need to find out some questions to figure out this issue:
What is your operating system on your computer? Windows or Mac?
How is this printer connected? Wireless or USB?
Please verify this information and I will assist you further. Have a great day!
I worked on behalf of HP.

Error message when saving to a:\ drive when no disk present

I am using a Jfilechooser andsaving images using ImageIO, but I want add in the code necessary to display an error message when the user tries to save to the a:\ drive but there is no disk present. How would I do this, this is the code so far:
JFileChooser chooser = new JFileChooser();
chooser.setApproveButtonMnemonic('a');
chooser.setApproveButtonText("Save");
// create a file chooser with save dialog
int returnVal = chooser.showSaveDialog(c);
// If the user selects ok
if (returnVal == JFileChooser.APPROVE_OPTION) {
// Get the file the user selected
File file = chooser.getSelectedFile();
/ Get the name of the selected file
String name = file.getName();
     // Set the format name to null
String formatName = null;
// Get the index number of when the . occurs in the file name
int dot = name.indexOf(".");
     try {
     if(dot == -1) {
     file = new File(file.getParentFile(),
name + "." + defaultExtension);
     formatName = defaultExtension;
     else {
// else get the format name using a substring.
     formatName = name.substring(dot+1);
     // If the image cannot be saved, display an error message.
     if(!ImageIO.write(bi, formatName, file)) {
     file.delete();
     JOptionPane.showMessageDialog(c,
     "The image could not be saved. Please ensure that the extension is .jpg or .png",
     "Image save failed",
     JOptionPane.ERROR_MESSAGE);
     else {          // The image can be saved, so display a confirmation message
     JOptionPane.showMessageDialog(c,
     "The image has been saved to:\n"+
     file.getPath(),
     "Image Saved",
     JOptionPane.INFORMATION_MESSAGE);
     catch(IOException e) {               // Display an error message if save fails.
     JOptionPane.showMessageDialog(c,
     "The image could not be saved, no space on disk!!\n" + e,
     "Image save failure",
     JOptionPane.ERROR_MESSAGE);

Again I have tried this, but in my program if I try to save to the a drive when no disk is inserted, the JOptionPane i want to display is not coming up.
the system prints out
java.io.FileNotFoundException: A:\image.jpg <The device is not ready>
If that makes any sense to you

Error message when saving .fm file

I just upgraded my FrameMaker program to 7.2.
When I try to save my work, the following message appears on-screen:
An internal error occurred while writing imported graphics in this document. The file has been saved, but has lost some image data. Please report this error to Adobe Technical Support.
My file has NOT been saved, none of the changes I've made have been saved. I cannot save this file under a different name, either. And the automated files that are generated by the program as "back-up" files are useless.
HELP!!!

Upgraded to 7.2..... Good that you didn't rush into it. ;- )
Anyway, that's the standard error message when a file contains objects imported using an OLE link AND you are running XP SP3.
SP3 implemented security fixes that essentially broke OLE within Frame (and a number of other applications).
So if your document(s) contain OLE links, you're likely to have to convert them to imported-by-reference graphics if they're graphic files or do some other type of conversion if they're tables or PPT slides.
Art

"This file cannot be found" error message when saving document

Hello,
Strangely, every time I click "save" in CS6 it opens up a 'Save As' window, (which shouldn't happen), then I click save witht the existing file name (it then tells me the doc already exists), I click OK, (and then OK to the next popup window) then get the message that "This file cannot be found". I'm forced to click "ok" and the doument isn't saved. I've tried saving it differently in previous versions and it still doesn't work. I recorded a video of this behavior. You can see it here - http://screencast.com/t/W1GYK0zsrk
Why would it be trying to find a file? It seems like an error message when trying to Open a doc, not Save a doc.
Please HELP!! I can't shutdown my station until I get the document to save.

Yes, Mohit1233 - it happened with every file yesterday. Finally, I closed the doc (forcing me to lose my work), then restarted my computer and today the problem is gone. I'm working on a PC (HP);
Barblove - I tried doing that yesterday (copying and pasting into a new doc), and still nothing. I also tried copying the work into a CS3 doc (but got an error message).

Error message when saving an modified XL Reporter in Microsoft Excel

Dear all
I have encountered an error message when I tried to save an modified XL report in Excel.
The error message is:
An error occurred while trying to save the report definition! Object variable or with Block variable not set.
The user now is using 200B PL 42 with Microsoft Excel 2003.
Thanks in advance for advices.
Thank you.
Regards,
Catea k

Hi Catea k ,
for thies error Object variable or with Block variable not set
Please evaluate if OSS notes ##559043, 571831 and 575434 are applicable to your situation
also check SAP Note 1227475 - Object variable or With block variable not set (processing)
Note 1132338 - Object variable or with block variable not set
Note 1180272 - Object variable or with block variable not set
Note 1100521 - Object variable or With block variable not set[Create Temp T
refer this thread also
Object variable not set - Run-time error 91
Regards
Abhishek

Error message when saving a jpeg after updating to Mountain Lion

I've just updated to Mac Mountian Lion and I'm getting an error message when I go to save a jpeg in Fireworks CS6. I've attached a screenshot but the message says "Could not save the file. The file could not be found". But it actually does save the file. This is very irritating and wondered if anyone else had come across this or found a solution. I believe I'm up to date on all my FW updates. I notice that this seems to do it when I use image preview to save. Thanks for any help!

I believe this issue was recently discussed in the following thread:
http://forums.adobe.com/thread/1041918?tstart=0

"Unknown Error" Message when saving Illutrator CS3 file

I get this unknown error message when attempting to save an illustrator file.(CS3). I tried to open and then save several files with the same resulting error message. As a work around, I have reverted to working in CS2 until I can get this resolved.

Chris -
Thanks for your quick response.
Do I understand you correctly in saying that Photoshop CS3 has PostScript information that it routinely sends to a printer, and therefore I would need to have a PostScript compatible printer inorder to work with this information (and also for my ColorMunki calibration to work)?
Based upon what you said, I think my color problems are because the ColorMunki profile for my printer, paper, & ink combination are being ignored.
Tom

Error Message when saving a scan with Officeject Pro L7555

When the drive for the printer goes to save a scanned picture or document to Word2007 I get the message: An error occured saving the images to the chosen file location. The extended error information is: 8,[(6,1015,-2147220489)]. Printer scans the picture or document without any problems, the error message occurs when the driver saves to Word2007. I have been scanning pictures and documents and saving them to Word2007 without any problems just before this error message occured. When I use Word2007 separately everything works fine.
I am using Officejet Pro L7555 with the latest driver for this printer and Windows 7.
Thanks for the help.
Larry

Hi there sciteacher32,
This seems like a software problem lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error message when i scan to my pc? how do i fix this problem? Windows Vista, HP Photosmart C4680

I have Windows Vista, and Hp Photosmart C4680. When I scan to my Pc, I get an error message, no scan is sent to my PC.
How do I fix this problem?

HI,
What is the error message you are recieving? Can you make a copy using the buttons on the unit?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Photosmart C4680 -- Error message when attempting to scan

HELP PLEASE!! -- Have a Photosmart C4680 all-in-one and after 3+ years unable to scan. This began several months ago but recently need to scan items and if I can't fix the printer will need to purchase a new one. The printer works fine, but am unable to print ALIGNMENT copy when I change ink and when I attempt to scan I get the error message:
"The scan cannot be performed because another program has control of the HP imaging device".
As I said I have no problem printing, but am unable to scan either documents or photos. I have done EVERYTHING the FAQ troubleshooting program recommended in the HP Solution Center. I have REBOOTED, UNINSTALLED and REINSTALLED, MOVED USB CABLE TO A DIFFERENT PORT but I still get the same error message. If I can't fix the problem I am tossing this printer as soon as I run out of either Black or Color ink, but I'm definitely NOT getting another HP printer if this is what happens after a couple of years.
Can anyone solve my problem?
THANKS in advance!
Hal

Thanks for providing that information halnyguy.
I would suggest doing a Level 3 uninstall and reinstall the Full Feature Software and start over.
Disconnect the USB cable. If using the USB connection.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%.
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted.
Download the software and choose to save as, save to desktop. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver.
After the software downloads and extracts, open the temp folder again. Close the installation window.
Open the folder starting with 7z. (Example: 7zS2356)
Open folder Util.
Open folder CCC.
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer.
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box.
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box.
In the Open box, type msiexec /regserver, then click OK.
Run the Disk cleanup from Accessories\ System Tool. Delete files using Disk Cleanup.
Download and install the latest version of Adobe flash player. Adobe Flash Player Support Center.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if that is causing the issue. How to use MSCONFIG . Click on the start up tab and click disable all.
Restart the computer.
Test the printer.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
Let me know how you make out.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

'No Computer Connection' error message when saving memory card pics

The printer is an HP Photosmart Premium C309g-m connected as a network device to an infrastructure communication mode wireless network.
There are no problems printing documents.
Documents have also been scanned and sent to specific computers on the network in the past.
So it certainly seems that there is a computer connection.
When a memory card holding pictures is inserted into the wireless printer and one tries to save the memory card pictures from the printer to a network computer without a memory card slot, one gets the error message, 'There is no computer connection'.
The Wireless Network Test Report Diagnostic Summary is all PASS with Very Good signal strength.
The Diagnostic Utilities were useless to me. I can only guess at what the problem might be because it isn't specifically mentioned as a possibility.
I tried turning the firewall off but it made no difference.
The documentation mentions UDP Port 427 but doesn't state the protocol to be entered into the slot for Windows Firewall.
There is a list of exception files but no detailed information on how to add them as exceptions into Windows Firewall.

Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Error message when Saving as Disc Image & Burning

I've been getting this error message: Not enough free disk space for encoding the remaining assets.
When I'm either trying to Burn a DVD or Save as a Disc Image. I've read all of the previous discussions and nothing is working. I have 320 GB on my computer hard drive and 8GB of memory. I'm trying to burn a Large (960x540) movie that I created in iMovie that is 12 minutes long and 169 MB. There is no logical explanation that I can find for there to be any space issues in burning or saving this file.
Also, I found something that said to delete a preferences file, repair disk permissions and restart the computer. All of which I've also tried.
How can I get this to work?
Or is there any other way to get this photo slideshow w/music onto the DVD without loss of quality? It's not a long slideshow or a large file, so I'm baffled why the quality gets so bad when I try to burn it directly to a DVD. I followed steps I found in this community that said to publish the project to the Media Browser in the Large format and then import it into iDVD. Sounded like a good idea, but now I can't get it onto the DVD because of the error message (Not enough free disk space for encoding the remaining assets).
Thanks for any help!

Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Error message when saving an Interaction Record: Document distributed

Hello experts,
We are currently getting error message: "Document is being distributed - changes are not possible" when saving an Interaction Record in Web IC (We use CRM 6 - 2007).
We've noticed that saving an interaction record triggers an outbound BDoc of type "BUS_TRANS_MSG". In order to prevent this BDoc to be generated, we deactivated the processing for the One-Order BDoc with transaction SMW3_0. However, this had the side effect that quotations were not replicated from CRM to ECC so we can't really use this approach.
Has anyone faced this issue before? Do you know how to fix it?
Thanks.

Hi
The initital status of Interaction record must ensure that transaction is not relevant for distribution. This ensures that CRM doesnot try to send the transaction to ERP through middleware.
Go to SPRO ->CRM -> Transactions -> Basic Settings -> Status Management ->Change Status Profile for User status
Here, select your status profile and click on the intiial status, scroll down and go to 'to be distributed' and select the radio button 'Forbidden'
This will solve the problem.
Many Thanks
Ravindra

Hp photosmart C4780 error message when saving scan to MAC OS X 10.9.5

Similar Messages

Maybe you are looking for