HP Photosmart C4795 Wireless Setup (Error Messege: Device Not Connected) Help?!?

I've had my HP Photosmart C4795 since 2009. I've haven't had any major issues with the printer until recently (probably time to get a new one).
This is my issue; the printer can't connect to my network. I'm able to print via USB from my Mac or PC. But I'd like to be able to print from any computer on my home network. In the past I've setup the printer to network with minor issue. I've had issues ever since the Mountain Lion Update (running version 10.8.3).
I've attempted to try once again to connect the printer to the network and I get an error message from my the HP Installer software (Device Not Connected). I've tried to troubleshoot the printer with no luck. These are solutions I've tried
1) Uninstalled HP Installer Software/Setup via Mac - I added the printer using the latested instructions provide from HP Supports section. I set up the printer but I can't it isn't showing up on any other computer.
2) WPS - My router (supplied by Comcast) couldn't find the printer. I used routers login website to connect the printer but it didn't work.
3) I've printed out the HP Network Configuration Page and manually add the printer's MAC Address to list on my router's devices list. I still can't connect wirelessly to the printer.
I've connected this printer wirelessly in the past before the Mountain Lion Update. Can anyone help?

First, on the printer go to Setup [Scan] > Wireless > Restore Defaults.
Then, set the printer up using WPS (pushbutton) - start it in the printer (Wireless menu) first, then the router within 2 minutes of starting it on the printer.
There is no HP software for 10.8, so you need to uninstall it. Uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Creative Zen Micro Firmware problem: "Device not connected, please connect your devi

After an exhausti've search, I've found the fix for losing your firmware and not being able to update it via download from the creative.com. To explain my problem, I had issues with my device connectivity, so I tried to option of reloadinging my firmware via Recovery Mode (option 3, 'Reload Firmware'). After selecting this option, I tried to download and update my firmware via the creative.com website. The module to update my firmware displayed the error message "Device not connected, please connect your device." After about 2 hours of trying various suggested fixes, I found a relati'vely easy fix by running together various suggestions I found for other problems. First rollback your Windows Media Player (WMP) via the instructions found on this page: http://www.auditmypc.com/uninstall-m...layer0beta.asp. Restart your computer after rolling back WMP.
When your compter restarts, insert the "playsforsure" CD labeled "Easy Start CD." Follow the directions for reinstalling WMP. After WMP is reinstalled, restart again. When the computer restarts, return to the CD and follow the directions in the prompt. Reconnect your device when prompted. Once you reconnect your device, it may not function right away. If this is the case, go to the 'Start' button, under 'Control Pannel,' select 'System.' Under 'System' select 'Hardware' and then 'Device Manager.' Find your portable device under 'Uni'versal Serial Bus controllers.' Click on your device and select 'Uninstall' from the small icons at the top of the window. When this is completed, unplug and plug your device back in. After this is done, click on 'Scan for hardware changes,' also a small icon at the top of the window. If your device had the problem mine did, it should now be recognized. Go back to the Creative website and download the latest firmware. The module should now find your player without any problems.
The only thing I can figure is that the "playsforsure Easy Start CD" must have a device driver that solves the problem that you can't find anywhere else. I hope this helps someone out there (tech support was telling me that I was going to have to ship my device back to the company I bought it from to get it exchanged...which would have taken at least a month, I'm sure). Good luck to you all.

For all of you non-technical Micro owners:
I found a fix for this that I hope will help others out.
When I want to Sync tracks to My Zen using Yahoo Jukebox or WMP, I simply reboot my machine with the device PLUGGED IN. After Windows starts up, my applications recognize that the Zen Micro is connected. Good Luck.

I'm receiving error Boot Device Not Found and Hard disk not exist when I boot up my laptop

I'm receicing the error Boot Device Not Found when i power on my HP G60-235DX laptop. After following HP's recommended troubleshooting steps, I receive error Hard disk not exist. Hmmmm....that's a little concerning. My guess is I need a new hard drive? I have the 17 recovery disks I made when I setup this laptop, however I'm not sure if they will resolve this issue. Any suggestions?

One of 3 things has happened, listed from most likely to least likely
1. Hard drive has died, replace it with one of the same size or larger, then use the HP recovery discs to re-install windows.
2, The motherboard has serious problems. (Replace the notebook)
3. The hard drive cable that connects it to the motherboard has somehow failed, not very likely. (replace the cable)
Replace the hard drive with a new one and use your recovery discs to get Windows back on it.
Here is your service manual, will show you how to replace the hard drive
http://h10032.www1.hp.com/ctg/Manual/c02985882.pdf
Recovery Instructions for Vista
Recovery Instructions for Windows 7

HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Getting error message device not responding

We have configured our cart several times before but am getting more error messages than seems normal. We have the cart going through the program and almost half have the yellow triangle with error message device not recognized. What is wrong?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Open Error 6: Device not configured

I recently had my hard drive replaced and restored to factory settings. I then used a time machine backup and the Migration Assistant to get everything I had back to where it belonged.
Things worked for a day or so, but with a few crashes here and there. Yesterday, I tried to use iTunes and kept getting an error message about the database (-50, unable to mount database). The problem is that the whole system would freeze and I had to shut down and restart every time. Sometimes I could load the OS, sometimes not. This morning I ran Disk Utility to verify the disk (it passed) and the permissions. When I tried to repair permissions, I got hundreds of messages like this : "Open Error 6: Device not configured on" and then a list of paths, such as "System/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/POSIX/getgrgld.al", and "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/....." etc. Literally hundreds of those messages.
Does anyone know what this means? And how should I fix it?!?
Thanks!

I'm going to suggest that you ask in the Snow Leopard forums here:
http://discussions.apple.com/category.jspa?categoryID=263
This is likely a system software error, and the SL gurus that hang out over there might have suggestions for you.
Good luck!

MuVo "device not connected" firmware update error

When I try to execute the plan given by Pook Kok Choy (below between "=====")
I successfully get MUVO_DRV_LB_00_04_250.exe installed.
When I move to step 2 I have the device attached to the PC but I get the message "device not connected to the USB port".
This happens, with the device connected and on while trying to install:
MUVOAudible_PCFW__40_2_L4.exe
Apparently, I am not alone in having this problem.
Apparently, this happens to others - using XP - specifically when trying to do this firmware upgrade in order to play purchased WMA, DRM protected music.
The PC recognizes the MuVo 28.
It assigns it a dri've letter when it is plugged in.
The install procedure for the *Audible* firmware does not see it.
Please help.
Tbanks,

JLRtist,
After you have installed the latest downloaded driver, did you run the player into recovery mode? Try this,press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file.
Jason

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

How to fix ipad error -1004 "could not connect to the server"

I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
Cannot Open Page
This page cannot be opended because of an error
This error is "Could not connect to the server."(-1004).
I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
Any suggestions?

I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
I emailed Conde Nast's customer service, and this is what they said:
Dear Subscriber:
Please accept our sincere apologies for the inconvenience you have
experienced.
We have applied a fix to the app for the server error and you will need
to close and re-open your app. To do so, please double click the "home"
button to close the running app and then re-open your app.
Please let us know if you still experience any problems.
If you should need further assistance, please be sure to include all
previous e-mail correspondence.
Thank you for your interest in Conde Nast Traveler.
Sincerely,
Shar
That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there.

Error PC Sync Not connected (after upgarde)

I have now managed to get PC Suite to recognise all connection types by using the PC connectivity repair programme in Windows Add/Remove programmes
Now everything works apart from sync with outlook. I get the above error - PC sync not connected. The phone 6300 is connected to pc suite bur the settings button in PC sync is greyed out & nothing happens when the select phone button is clicked
PC Connectivity Solution:
Version 8.15.0.0
[Nokia Connectivity Cable Driver:]
Version 6.86.11.0
Operating system:
Microsoft Windows XP 32-bit Edition, Service Pack 3
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 7.0
- Mozilla Firefox (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 5512)
- Broadcomm (Version: 5.0.1, Build: 801)

Hi,
When you try to delete SMS message, does it really open PC Sync window?
Anyway, see this (and try manta's message):
/discussions/board/message?board.id=pcsuite&message.id=12465

SQLPlus COPY error: ORA-03114: not connected to ORACLE

This is what I'm trying to do:
I'm logged into an Oracle 8.1.6 database on a Windows 2000 Professional box and trying to copy data and tables from an Oracle 7.3.4 database on an HP/UX box.
I log into my 8.1.6 SQLPlus as:
scott/tiger@testdb
Then I run the following:
SQL> set copycommit 1
SQL> set arraysize 1000
SQL> copy from user/user1@devp1 -
create reps_t -
using -
select * from reps_tThis is my error:
ORA-03114: not connected to ORACLE
Can someone give me a better understand how SQLPlus COPY works and give me an idea how to locate the problems.
Thanks,
Laith E.H.
null

I think this combination user/user1@devp1
is not ok.
U can get good material about copy command
from technet itself. Just search for Copy

Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.

Yes, I am connected... how else could I write this?
Adobe chat doesn't help. Adobe Tech doesn't help!
I purchased a book and I want to read it!!! HELP!
Also, since this is the first book I have downloaded there is not "de-authorize" option.
Thanks.

yes... uninstall 4.0... go to download site... scroll down and download 3.0install 3.0 and authorize computer than you can upgrade to 4.0
Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.
created by readingjenn in Adobe Digital Editions - View the full discussionI am also having the same issue. Following to see if you get an answer. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063023#7063023 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063023#7063023 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

HT3204 keep getting error msg saying not connected to internet but i am.....trying to sync iphone

Keep getting error msg saying not connected to intrnet when I try to sync iPhone but Internet is up and running

Firewall of some type blocking whatever port the help system uses?
Router setting?

I cant print from the internet, but can print off internet, error 20 prt not connected

when I try to print my mail down, I get error message error #20
printer not connected, but if I print my any of my files down the printer works(not from the internet)
Can you tell me how to print test page for windows xp

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

HP Photosmart C4795 Wireless Setup (Error Messege: Device Not Connected) Help?!?

Similar Messages

Maybe you are looking for