HP Photosmart c5180 plug printer in, the printer automatically turns on and does not function.
When you it is plugged in with Power, the power button turns on and the display looks like it is initializing but then it flashes, the cancel button blinks ones and then it start over.
If you try to turn the printer off with the button, seems to turn off but the display stays on.
I ahve try unplugging the printer from the wall and the printer... 15 secs. Plug back in and still continues to do the same this.
Hi there tcamlew,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried to reboot but nothing happens.. pls help..
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help
Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M. -
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
how do I get the keyboard to come up -- without re-booting? On the ipad2, it occasionally freezes and does not permit the keyboard to appear
Have you the latest iOS version (5.1.1)? If not, an update might solve the problem.
-
Glitch since installing OS X Yosemite. When I download a docx MS Word doc and try to open it the word icon flashes up and does not open.
Step one is to log into a newly created admin user account and see if the problem persists.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it
Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy -
The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.
This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
The screen on my ipod touch does not function. Any suggestions...?
Try:
- Resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies. -
My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?
As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement. -
Had my ipod locked and put it on charger, now it will not even turn on and does not even register connected to the puter? Any ideas???
You just need to reset the ipod by holding down the sleep button and home button for ipod touch or the menu and centre button on others for about 10 seconds
-
By synchronosing the Iphone 4 backup starts and does not work
Hi all
I've a serious problem....
Since two days the I-phone backup does not function anymore. Evereything is on the newest IOS - level and tge rest functions well.
ITunes: 10.4.0.80
IPHONE SW version 4.3.5
By synchronising... the connection to Itunes functions, stap 1 starts... and after a quarter of all (approx. 25 %) the backup is standing still
but the Download with Podcast does work.
I have already re-installes Itune 10.x but also with the new installation the same occurs.
Does someone have an idea about the problem and is there a "patch" anywhere available
Thanks a lot and kind regards
ursfrombernJust bought an iPhone 4 this morning, im having the same issue. Markers are there but no map behind them, and maps app IS working. Also weird that my buddys iPhone 4 places tab was working just fine. Probably just a software bug which will be fixed in an OS update. When I got my 3GS I had an random whining noise coming from the speakers which was annoying, but it was fixed with a future software update. Dont go return your phone just yet
-
Printer worked when installed. Was able to print test photos and print jobs. Also able to print several personnel print jobs. Several das later it will not turn on and respond. Have tried all suggested trouble shooting solutions to no avail.
Hey @cyanobacteria ,
Thanks a lot for the question, now lets get you an answer!
I understand your printer just stopped working out of the blue.
This is very weird, I suggest you make sure the cord is connect in the middle, both ends and then I would check to see if the outlet it is plugged into is still working. Please try all those things. If it doesn't fix the issue at all I HIGHLY RECOMMEND you cal HP Technical Support.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
I worked for HP. -
TS2662 changed the batteries on wireless keyboard and does not turn on now
Changed the batteries on wireless keyboard and now it does not turn on, is there a trick to this?
No trick. Be sure the batteries are inserted correctly and that the cover is tight.
Try different batteries.
Reset the SMC if it still does not work.
Barry -
I have connected my iPad 2 to an Infocus X1 projector using a 30 pin / VGA connector. The iPad will not change from slide sorter mode to presentation mode. How do I change the iPad to 'slide show' and get the projector remote to respond to changing slides?
The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.
Maybe you are looking for
-
Unable to move more than one song at a time
For some reason, iTunes has stopped allowing me to move more than one song at a time to playlists or my manually-managed iPod. I can grab as many songs as I want, but when I drag them over to the sidebar, i don't get the little green plus sign that m
-
Firefox 5 and 6 both are crippling auto-player scripts, why?
I use a number of greasemonkey scripts. Once I updated to 5 these scripts, while still working partially, were no longer working completely in "Mafia Wars". I'd say they were less than 50% functional and were essentially useless to me. Upgrading furt
-
Download pictures to pc lumia 710
I would like to download pictures taken on my 710 to the pc one at a time. I have followed the steps and made all the correct checks in the approiate places but no photos are transferred. Using zune - on the screen with showing the pics on the phon
-
j'ai un clavier Apple filère dont les flèches à gauche du pavet numérique ne fonctionnent plus correctement, sous exel par exemple, le curceur ne passe plus d'un case à l'autre, c'est la page qui bouge toute entière. Je suis utilisateur de Mac 27 pou
-
We uploaded a lockbox file and all my payments went unapplied. Most of them have a customer account assigned under t-code FLB1 and the receivable is open but it is left unapplied. When I try to post, it says payment advice does not exist and when I