HP Photosmart C6100: Complete stuck (Microsoft word + "Black only" window)

Whenever I tried printing documents from Microsoft word, a window of "Ink catridges empty" pops out (because my magneta colour has run out). However, when I clicked on "black only" button, the whole screen (even the microsoft word) freeze. I couldn't even close it down unless I use the task manager. Any remedies?

Hi shirsar,
I understand you have a Photosmart 7510 that seems to be using a lot more of the photo black than the regular black ink. I'm sorry to hear this, but believe I can assist you with a solution.
You can set the printer to use black ink only when printing from the PC and that should ensure that it uses that the black ink and not the photo ink. My instructions will be to set it up in the driver so it does it for all programs (if you want it for just the program please let me know and I will advise further). You will want to start with going to your Start screen, and just start typing Devices and Printers and you will want to open that (if that doesn't work type in Control Panel and then proceed to open Devices and Printers). Once Devices and Printers is open, right click on your Photosmart 7510 icon and select Printing Preferences. You will then want to click the Advanced button at the bottom right of the screen. The next page that opens will allow you to set the printer to use Black Ink Only when printing from the PC (please follow the screen shot below for any clarification).
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

CWK file to pdf or Microsoft word on a windows computer

Could someone please tell me if I can convert a CWK file to pdf or Microsoft word on a windows computer. I have tried opening the word document and going to the 'open' options etc but this still won't open the CWK file.
Is there something else I can do to open the files or convert them to pdf?
Thanks in advance!

It seems this is an old Apple Words document. A Google search revealed https://www.google.com/search?q=cwk+files&sourceid=ie7&rls=com.microsoft:en-US:I E-Address&ie=&oe=&gws_rd=ssl that Word will not do this natively. I was able to see a couple of converters, and it also provided info that LibreOffice, a free open source Office program can open them with exceptions.
How you decide to go about doing this is up to you.

Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tri

Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.

make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I cannot e-mail microsoft word attachments with Windows Live mail

I receive error message - Logon failed, you must logon to Microsoft Exchange to access address book. Error Code: Unspecified error. Another message pops up: There is no e-mail program associated to perform the requested action. Please install
an e-mail program or if one is already installed, create an association in the Default Program Control Panel.
My Windows Live mail is working - I receive messages and can send them but I cannot send Microsoft Office Word 2007 attachments which I could before. Yahoo mail sent a message to use Firefox instead of Internet Explorer and I tried it and then
uninstalled it and something apparently got messed up.

I recommend you post in a Windows Live Mail forum. This forum is for Microsoft Exchange Server 2013.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Adobe does not recognize footers in Microsoft Word 2007 to PDF

I have copied and pasted the details, below, from a previous message I have sent out to an assistive technology listserv.
I am encountering this problem with various builds and versions of Adobe Acrobat:
Acrobat X on a Windows Vista 64-bit build (note that this is the best Acrobat I can install on Windows Vista, Adobe Reader XI is not even supported)
Acrobat X on a Windows XP build, sorry, do not know the bit count (it is my work computer so I can't upgrade anything)
Acrobat 9 on a Windows 7 64-bit build.
I have also encountered and checked into whether or not the PDF reads (and does what I want it to) in JAWS 14, latest update (Feb 2013). We encounter the same problem with JAWS and this morning found out that there is a conversion error between Word and Adobe. (See this post, where the ---- are).
Summary, I have spoken with JAWS, put out a support ticket with NVDA via e-mail, spoken with Microsoft, and tried to communicate with Adobe about this issue for help and Adobe is refusing to help. The other places tried everything they knew but they could not get it to work. I even tried to strip all the page numbers from Word and number using Adobe's page numbering feature, but that was not successful either because I cannot use Roman numerals.
I would appreciate any feedback the Adobe Forums can give me; please note that I cannot post a sample document at this time as the only document I have is a private work document (cannot share those by policy, so I will have to make up a fake document if I get the time and energy).
Thank you very much for your time and expertise. The pertient info is above and below in "Original Message" and "Activities section" - the other information is there if you'd like to look. And to provide feedback to Adobe about things I think they could improve, since they will not let me email them directly.
----Original Message----
My question concerns the reading of Footers / Headers in Microsoft Word 2007 and Adobe Acrobat (headers/footers designed in Microsoft Word 2007 and then converted to PDF with "Bookmark" checked in Adobe Acrobat conversion settings).
The document is a word document containing 50+ pages. There are 12 pages of "front matter" that are marked with Roman numerals. Subsequently, the body text of the document has an Arabic number (1, 2, 3, 4, etc.) in the bottom right corner. Footers are used properly in the document. All Table of Contents links, which do link to both headings in the "front matter" and to headings in the body text, are picked up properly. Literately, the only thing not reading on the document are page numbers (the Word Status bar is reading its page numbers, but the page numbers in the footer are not reading).
I then need to convert the document to Adobe Acrobat PDF. Granted, I have a full copy of Adobe Acrobat X available to me, and my various assistive technologies have always functioned better when opened directly in Acrobat (rather than Adobe Reader). So, I set the accessibility options (from Word) properly, asking it to bookmark Headers and Footers as appropriate, thinking that this will pick up the page numbers and make them read as the bottom right corner of my PDF.
All links work in Adobe to navigate by section/heading. All figures are alt tagged. Everything is perfect - but the one thing that NVDA won't read are the page numbers. Visually, the page numbers are there on the document, but NVDA won't pick them up. Additionally, I also changed the appropriate page numbers in Adobe (Page Thumbnail Pane, on the Navigation Pane I believe it is called) - to reflect the section where it is Roman numerals and Arabic numerals. This did not help, and for what it is worth, I cannot get NVDA to voice when I am in this pane, so I don't seem to have a chance of getting the page number info from there.
NVDA reads the document just fine except for the above-mentioned snare. However, when it reads, it will go to the next page, and say, "Page 2 of 54, (page text), Page 3 of 54 (page text)," etc. when I will need it to say Page ii of 54 (page text), Page iii of 54 (page text)," and so on, changing to "Page 1" when the Arabic numbers are used.
I know that the Page Label issue is part of Adobe's issue, with them not releasing the PageLabel aspect. (I have looked through some NVDA tickets). I do not know how to put a "changeset" into my copy of NVDA though, or even if it would help (I have no computer scripting skill). The easy answer would be to upgrade to Adobe Reader XI and see if that helps, but I don't have the ability to put it on every computer I use, and *I need this file to read consistently across multiple versions of Adobe* (including Adobe Reader/Acrobat 9, X, and XI). (This file is also going out to people who may not have the latest version of Adobe, but are also running some copy of NVDA, either a portable or a full install).
Is there any way to pick up the Footers with page numbers voicing in NVDA, and/or have it read the user-editable page number box that is on Adobe's Toolbar (next to the 1 of 54 parentheses). This user-editable box, to jump to page numbers, reflects the Roman numerals I have loaded into the pages of Adobe. When I press Ctrl+Shift+N in Adobe, I can also go to the appropriate page (if I type in iii, it will take me to iii, if I type in 34, it will take me to the Arabic number 34 -- NOT the 34 of 54, which would land me on a different page. And I want to land on the page that has the Arabic 34, so that's functioning fine.
I just need the page numbers in the footer to voice, "Page iii," or "Page iv," or "Page 29," etc. If I could get NVDA to do that, I could say to viewers of this document, "If you are using NVDA, remember to Ctrl+Shift+N to get the GoTo Box, then type in the page number you want if you cannot follow a link or a bookmark." This document is *very* accessible in my opinion with lots of ways to navigate...the only aspect of navigation that isn't being picked up are those footer page numbers!
I do have my Document Formatting settings on the NVDA menu set to "Report Headers," but that does not seem to help in either Microsoft Word 2007 or Adobe Acrobat. I have even switched the page numbers from the footer to the header to see if that would help and it didn't.
----Activities I have done today----
I spent over an hour on the phone today with Freedom Scientific (makers of JAWS) trying to troubleshoot this. We discovered that Footers will not read very well in JAWS and Microsoft Word 2007 (only solution is to stop reading document text and read Virtual Viewer text briefly, then go back out to document text, then back into Virtual Viewer which is NOT an acceptable or accessible solution whatsoever -- too much work for someone trying to read the document) -- and then we also discovered that:
Upon conversion from Word 2007 to .txt file (.docx to .txt), there are no alt tags for the figures in the document, or page numbers.
Upon conversion from Word 2007 to Adobe Acrobat X then to .txt file, every insert of a page number and footer is replaced with the same alt numberpad numerical code: the one that generates female. ♀No wonder JAWS and NVDA are skipping this, neither understand how to communicate it.
On the advice of JAWS Technical Support I contacted Microsoft Accessibility Technical Support and spent an hour on the phone with them. They say that unless Adobe can find a solution, it appears that it is impossible for Microsoft products to read the footer if JAWS was unsuccessful doing what I wanted it to do. The document/footer in question includes about 12 pages of front matter (numbered in Roman numerals) and 44 pages of body text (numbered in Arabic numerals).
I kindly explained to the Microsoft Support Agent that I found this issue hard to believe, although I understood. Sighted folks have the ability to make their documents look quite professional and that is the caliber and quality of documents anticipated from everyone, especially college students graduating from school, or job applicants. That a coding issue prevents the footer from being read properly, except in Edit view, is disappointing. The representative was with me 100% of the way. She completely understood where I came from. And yes, when I am designing the document myself, I know what I put there (or I pretty much do, anyway). But if I recieve a document, it is much harder to tell what is really there or not, or how the page numbers really lay. And this is confusing as heck, believe me.
I then called Adobe Technical Support, after having a brief online chat with them. Granted, I had to leave the chat in the middle because I got interuptted by something that was high-priority, but the woman chatting from Adobe says that chat is only for installation issues, and I will have to pay to open a support ticket. Excuse me? I have paid a hefty sum of money for Adobe Acrobat 9 and Adobe Acrobat X (work paid for the other Acrobat X copy). I deserve this problem to be troubleshooted for free. There was even a statement on the Adobe Acrobat X website that said Acrobat X users didn't have to pay for support, but Reader users did.
----Slight bit of rant and constructive criticism----
In speaking with Adobe Technical Support, I had to wait on hold for 30 minutes before my call was answered, and then I had to consent to being on hold countless times and had to answer, "Yes, I am converting from Word 2007 to PDF using Adobe Acrobat X" at least 6 times. The representative would put me on hold, then ask me the question, then put me on hold again, repeated 6 times over 45 minutes. At the end of 45 minutes (1 hour and 20 minutes of wasted time by now, that I must justify to my employer) - I told the representative I wanted to speak with his supervisor immediately, I did not care if he was trying to fill out a support ticket (and putting me on hold at least 4 more times in 10 minutes while he claimed he was filling out the support ticket) - and finally he put me on hold again and gave me to a very helpful supervisor. Within 6 minutes of speaking with the supervisor the supervisor had my support ticket filled out and I should recieve a call from Adobe within the next 30 minutes if his estimation was right (he estimated two hours, but it's been an hour and a half).
I have yet to know what can be done about my document. Freedom Scientific Technical Support is closed now for the day and I need to work tomorrow and Friday away from the phone. As I stated to Microsoft Accessibility Support, I truly feel that Adobe should read the page footers, every document says that Adobe should be able to read the page footers, and I feel slighted that as a person who uses assistive technology, there is some glitch that isn't making this happen. I am not blaming a specific place per se, except I am a little frustrated with Adobe especially since they have not gotten back to me, and I am frustrated with their customer service. JAWS customer service and Microsoft customer service were both exemparly, and I cannot say enough good things about them. My wasted time with Adobe however, that was disrespect in my opinion. And I certainly will not pay to open a support ticket, and my workplace has a site license. They've paid enough already.
If you've read this far, thank you. I look forward to replies, or at least understanding. And if anyone has ideas, I'd appreciate it very much (yes, I have tried taking the page numbers off and using Adobe's page number feature, but that would not allow Roman numerals. Only Arabic.).

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

I can't type in my Microsoft Word 2008 anymore on MacbookPro, how do I fix this?

I have a MacbookPro from 2009 and my Microsoft Word 2008 won't let me type or use any keyboard functions on the page. I still have full use of my mouse/cursor. I also just recently updated to Yosemite. Help!

This just started happening to me, too, about an hour ago. I updated My Macbook Air 2013 to Yosemite a day after it came out, and I use Microsoft Word 2008 quite frequently (several hours a day), yet this just started happening.
TEMPORARY SOLUTION: I find that if I completely quit Microsoft Word and reopen it, I am once again able to type.
It's happened to me twice so far tonight. This second time I noticed that it was right after I copy and pasted something, then changed it to double space. Have you noticed anything similar?

Livecycle ES2, microsoft word 2013 not playing well

I am trying to open a word document in livecycle ES2 and have the same error message alot of other people also have (Word (version XP or onwards) could not be found). I have adjusted the registry and have had no luck with a solution. All of the other users with this same problem involve microsoft word 2010. Is there a specific set of instructions or different registry edit process if i am utilizing microsoft word 2013.
Windows 7
Livecycle ES2
Microsoft Office 2013
Thank you for your time and guidance.

Have you already tried this http://blogs.adobe.com/dmcmahon/2012/09/16/livecycle-designer-es2-word-version-xp-or-onwar ds-could-not-be-found-on-the-machine/ ?
Also LC Designer ES2 supported only Word XP & Word 2003 http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000196.html
--Santosh

HP Photosmart all in one C410a scan to microsoft word

In my HP solutions center for my Photosmart Premium C410a there is no dropdown shortcut to scan to Microsoft Word.
I had given up on scaning to Word and settled for PDF files.
I have recently been scanning hundreds of documents and on about 3 or 4 these scans out of almost 2,000 the document was perfectly scanned to Microsoft Word. I have no idea what I had done differently or what possessed the scan to change the scan format perfectly to Word,
Since this happened 4 times, is there anyone out there who might know how I can find out how this happened and use this quirk to scan the rest of the documents to Microsoft Word?
Thank you.
George

Hello cosmohp,
Welcome to the HP Forums.
I see that you are having an issue with consistently scanning to Microsoft Word.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please write me back when you have time and I will be happy to research this issue for you.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I exported pdf file to microsoft word but it came across completely garbled. What is solution?

I exported pdf file to Microsoft Word and it came across completely garbled. What is solution?

Hi,
Perform below step for PDF Icon in library.
Configure PDF Icon
- Download PDF Icon from Adobe website: http://www.adobe.com/images/pdficon_small.gif and save it to
Images folder under 14 hive folder <var>(In my case C</var>:\Program Files\Common Files\Microsoft Shared\Web server extensions\14\Template\Images)
- Open Command Prompt and type IISRESET -Stop to stop IIS and edit Docicon.xml
- Navigate XML folder from C:\Program Files\Common Files\Microsoft Shared\Web máy chủ extensions\14\Template\Xml and open Docicon.xml by NotePad
- Insert <mapping key=”pdf” value=”<var>pdficon_small</var>.gif ” /> within the <ByExtension> section
- Save and Run command IISRESET -Start
For More information :http://nhutcmos.wordpress.com/tag/display-pdf-icon-in-sharepoint-library/
Regards,
Mukesh Ajmera

If I have a document in Microsoft word but now have on the Mac and the format is completely off. How can I get this to be right on the mac

I need Help with my Mac. We have a document that is on a thumb drive that was typed on a dell PC. We have a Mac at home and need to print the document. How do I get it to look the same as when on Microsoft word?

try NeoOffice or OpenOffice. I don't know what apps you have. Pages might open it or TextEdit, but, again, I don't know. All I can do is suggest. If you are really a stickler for format, if you're on that dell PC again, try saving the document as a .pdf and then putting it on the thumb drive.
JB

Photosmart 7660 printing blank page when using Microsoft word 2007

I have a Hp photsmart 7660.It will print a Test page ok-it will print some of the text in an email.That is the heading and the end, but not the message in the middle of the email. When I write a document in Microsoft Word or Works the printer will go through the motions of printing but all I get is a blank page.
I have uninstalled and reinstalled using original disk and also tried the same using Hp software download all to no avail.
The utility diagnostic says there is no problem everything is working well,but of course it is not. Can anyone help me to resolve this problem please.

I tried this but didnt work for mr. Can you help? How did you PDFed??
It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
2007 (this requires Adobe Acrobat).
I did this by:
first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
I gave it an absolute vertical position relative to the page.
Then I cut the text box, went into the footer, and pasted it there.
It might have worked to just create the text box in the footer itself.
I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
Charles Kenyon Madison, WI

How to print my microsoft word 2010 document from my hp photosmart c4780

I just installed microsoft professional office to my hp Pavilion g7-1167 dx Notebook PC. I created a document using microsoft word, and when I print it, it only prints part of each page. Do I need an update for my printer? Or is there another way to fix this?

Download and install the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Converting Microsoft Word 2007 documents to PDF - Lines round all jpegs?

Hi,
I have recently had a new suite of headed notepaper designed and set up in Microsoft Word and it was all going swimingly until we tried converting the completed docments on our computers into a PDF format for sending out on e-mails etc., the pc's are running Microsoft Office 2007. Although it works, each of the jpegs contained in the header and footer have thin ghost black lines round them local to the image.
We are running Adobe Reader X (10.1.4) on the pc's and mac.
This does not happen in Word 2003 or 2010 or on an apple mac?
Why does it happen with Office 2007?
Another point is that the word template letter document is circa 3Mb. When I convert it on the 2007 pc it provides a sensibly sized 160kb PDF but when I do the same on the Mac it is still 3Mb. Obviously in the short term I am having to use the mac and accept larger file size to achieve a clean page but I need to get this all sorted out.
Can anyone help out there?
Many thanks.

***** Actually, girls and guys I think I have found the problem!!!!!
It's not just pictures that can cause the "Cannot Save File" message it's also fonts.
We were using Myriad Pro in all our Case Studies and up until a certain date 2 months ago it was great all could be printed and there were no problems. Then for some reason - and I have since discovered the font Myriad Pro has a licensing issue on our PC's - all our Case Study templates were unable to be converted and we were having issues all over the place.
I went through the advice contained in these posts (and also onb the Adobe website) and removed images one by one to see what was actually causing the problem. Nothing, no result the issues still existed. Then I hit upon the idea of changing the font to Arial and BINGO!!! it worked!!!! So, my advice is to ensure that your images are free from errors (whatever that means!) and you're using fonts that have no licensing issues and Publisher will be able to convert them no problems.
Now, as for the advice Microsoft gave us...well I am as frustrated as everyone else is that we had to find the answers ourselves and MS couldn't have developed a tool that would pick up these issues for us in the document itself. C'mon Microsoft you make this great product - make it even better and give us better diagnostic tools please.
Oh and by the way, when I did the same document in InDesign (which was a pain in the a...) it handled the font issue no problems - explain that one Microsoft.

Photosmart 7525 Windows 7 How can I choose to print in black only?

HP Photosmart 7525 All-in-one printer. Windows 7 software.
Is there a way to choose to print text in black only, even though there may be color on the page? When I choose to print from Microsoft Word, it does not give me an option, and I can't find reference anywhere in instruction manuals. Can someone help me please?

Hi,
The are 3 options for Grayscale/Greyscale:
None (or Off): print in colors (including black )
High Quality grayscale: mixing all colors to make black & white
Black Ink Only: Use black in only to print.
You can set one option as default and change each print job to meet your need. Please use the following steps to set default:
Double click printer icon on desktop,
Click Advanced in Paper/Quality tab
Select the one you want (above list)
Click Apply/Ok to get out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

All of a sudden my printer has stopped printing anything in microsoft word. i

My HP Photosmart Plus printer quit working with microsoft word. I have tried all the troubleshooting suggestions and nothing works. I don't know why it stopped working. Any suggestions?

Please read this post then provide some details. What printer model - there are several Photosmart Plus models? What operating system? What version of Word?
When you try to print from Word are there any error messages? Does the printer go through the motions but print blank pages?
The following may help in troubleshooting print quality issues. If printing a test page indicates black is not printing properly and the troubleshooting steps fail then the following page may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Photosmart C6100: Complete stuck (Microsoft word + "Black only" window)

Similar Messages

Maybe you are looking for