Hp Photosmart D 110 series off line after 8.1 update! How do I get online using the wireless

when window 8.1 do an update my wireless printer goes off line!
How do I get it back on Line in the wireless mode.
I have to use the usb to print. It  take away my freedom
This question was solved.
View Solution.

Hi,
During the process, it should ask you how to connect USB or wireless. Now, pull the USB cable out and run the setup from your computer again.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HT1212 I've forgotten my ipad passcode but when I try to restore on the computer it won't let me as I have to turn "find your ipad" off but i don't know how when I can't use the  ipad itself. How do I do this on the cloud?

    I've forgotten my ipad passcode but when I try to restore on the computer it won't let me as I have to turn "find your ipad" off but i don't know how when I can't use the  ipad itself. How do I do this on the cloud?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1338 After a software update, how do I get my camera to work on my Mac Air?

    After a software update, how do I get my camera to work on mu MacBook Air?

    Launch the app that does what you want to do with the camera:
    OS X Mavericks: Use your Mac computer’s built-in camera.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • My Fast Dial page disappeared after latest Firefox update- how do I get it back?

    After updating to Firefox 7.0.1 my Fast Dial homepage disappeared. I have updated Fast Dial to the latest version which is supposed to work with Firefox 7.0, but the Fast Dial homepage is gone, and I have not been able to restore it. How do I get Fast Dial back?

    see https://support.mozilla.com/questions/885622

  • After installing Evernote, I get unwanted ads even after uninstalling it. How do I get rid of the "Save $" ad?

    I tried adblock and ran anti-malware software without success.

    This issue has been solved.<br>
    Please view the support ticket for more details.
    [https://lastpass.com/my.php?token=TRHJ2AUK8VSV LastPass Support Ticket]

  • I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
    This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

  • How do you get rid of the blank row/line after the header?

    My report needs to use the "Different first Page" and "Odd and even page" layout options. However, after the header is printed, it also print out a blank line and then print out the data table. How can I get rid of the blank line. Also, after the table is printed. A blank line is printed and then it the footer gets print. How can I get rid of the blank line as well? Thanks for your help!

    No idea what you're talking about. i don't see anything like that.

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HP4501e "print spooler off" error after installing printer update

    Motorola Android OS, getting "print spooler off" error after installing printer update... have rebooted both printer and phone to no avail... any help ideas?

    Loralee,
    ??  I am sorry the computer is not working.  I don't work for HP and cannot comment on lawsuits or other calamities.
    If the notebook worked prior to an update -- and this is an entirely different can of worms and problems -- and you think that there is any chance the notebook is just in some sort of "tangled" state and not completely hosed for some reason, you can try the following non-lethal device reset:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    If you are using a Notebook:
    Close all your programs and shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    Reminder:  Hard Reset is just a device Reset.  The procedure does not wipe out your files nor does it destroy your Windows setup in any way.  This type of reset "clears the cobwebs". Depending on the root cause of the problem, this procedure can fix a variety of computer glitches.
    This does not fix severe Operating System errors -- it is just a device reset.  It can fix minor problems that updates sometimes cause.
    ============================================================================
    I am sorry you are having so much trouble.
    Other help:
    HP Mobile Printing
    You can call HP for help --
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Warranty Required – USA and Canada
    USA – Contact HP // Self-Help – Email - Chat
    Happy New Year, Loralee!  I know it seems to be getting off to a rocky start!
    Click the Kudos Thumbs-Up to show you appreciate the help.
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • How do I get back all the songs stored in iTunes after they were wiped out off my computer?

    How do I get back all the songs stored in iTunes after they were wiped out when I re-installed Windows 7?

    jldacmd wrote:
    How do I get back all the songs stored in iTunes after they were wiped out when I re-installed Windows 7?
    You did not make a backup of your computer before you erased it?

  • I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

    I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
    Brian

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    Hi stephanie,
    These are unrelated questions/statements.
    Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
    Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
    You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
    Regards,
    Barry

  • When capturing video; how do I get rid of the green lines at the bottom of the frame?

    When capturing video; How do I get rid of the green lines at the bottom of the frame?

    s.haider
    You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
    Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
    a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
    b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
    Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
    a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
    b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
    And, the general drill for all users of Premiere Elements 8.0
    a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
    See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
    b. Are you working from the 8.0.1 Update version of the program?
    Please consider.
    We will be watching for the outcome.
    Thank you.
    ATR

  • How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

    If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

  • I had to do a re-install of Thunderbird after a crash. How do I get my old address book into my new one?

    I had to do a re-install of Thunderbird after a crash. How do I get my old address book into my new one? There are only a few of the contacts I had, so there must be a location where the rest are, but not sure where to look. And once I find them (with your help), how do I get them into the address book?

    If you copy abook.mab or history.mab into a profile folder, they will show up as Personal Address Book and Collected Addresses. But if the mab files have names other than abook or history, they can only be imported to TB with the use of [https://nic-nac-project.org/~kaosmos/morecols-en.html MoreFunctionsForAddressBook].

Maybe you are looking for

  • Drag and Drop Interaction - Incomplete

    Hi I have began using the Drag and Drop Interaction which is working really well. I have one issue that I cannot see how to do,  I hope there is a possible solution somewhere. All other questions have an incomplete caption that appears when you click

  • Function module to get the cost estimate

    Hi all while running the standard  costing run the cost estimate is stored in the table keko and keph.can anyone tell me whether is there any function module to get that cost estimate of a material  which is in released status

  • Importing from iphoto to LR

    When I import my library from iphoto into Lightroom, the images all arrive as jpegs, the original Raws (.CR2) seem to be converted. Mac OS 10.5.1 Leopard. Any tips?

  • Apex Form - how to enter primary key value manually?

    Hi Whenever I am creating Apex form using wizard, it asks me to specify trigger/sequence/pl/sql function for populating primary key value. However, if I want to specify primary key myself (ie. not auto generated number), how I can specify that? Thanx

  • 975X - Realtek ALC882: SPDIF output locked to 48kHz??????

    Hi, finally everything works fine here with my Platinum 975x PowerUp. But I have a problem with the digital audio out. With every driver I've checked, the output samplingrate on SPDIF is locked to 48 kHz, there are no options to change that. I don't