HP photosmart D110 Mac OSX 10.8.5

I have had to reload my printers into my Macbook pro. I have loaded the HP photosmart D110 in the print/scan utility and can see the printer. I also can print a test page. When I go to print a document, I get the following message "printing-printer in use" and it just stays in that mode (no printing). I have tried turning off the router, printer and computer. This did not work. Any help is appreciated.
T Safran

Hello TSafran and welcome to the HP forums!
I see you have a Photosmart D110 that you're not able to print with on your Mac running 10.8. I will definitely do my best to assist you with this issue!
I realize you stated you just had to reload your printers onto your Mac, but I'd like you to start with resetting your printing system (don't re-add the printer just yet) and then follow up with a verify/repair of your disk permissions. Once those complete, please reboot your Mac and then re-add the printer to the queue before trying to print again.
Let me know how this goes for you!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

Photosmart C5180 MAC OSX 10.9 Setup - Software for this printer isn't available from Apple.

Can't add printer with OSX 10.9 - asking to choose a Driver with message Software for this printer isn't available from Apple. Had been able to print with no problem until this week.

Hi,
Please check the printers supported list and try the following fix:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't scan HP Photosmart C3180, Mac OSX 10.9.5 after update V.3.0

hi,
today I installed the V3.0 from HP in my Mac. but now the scanner doesn´t work.
I tried all tips at HP site but nothing
any idea?
This question was solved.
View Solution.

Hi @Alex_Mezaros
I would like to do the best I can to help you. Since the issue just arose when you did the latest update, let's remove it. Please complete the following steps and let me know the outcome;
From the computer desktop, double-click the Macintosh HD  icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Double-click the PPDs  folder.
Double-click the Contents  folder.
Double-click the Resources  folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.
When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty  button, and then click OK to empty the trash.
NOTEBy clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.
On the upper-left corner of the computer desktop, click the Apple menu icon, and then click System Preferences on the drop-down menu.
Double-click Print & Scan.
In the Printers list, click your HP printer, and then click the Minus button to delete it.
Restart the computer and now you have a fresh start.
Try scanning.
I look forward to hearing from you and will offer additional assistance if the issue remains unresolved.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Connection with Printer Photosmart D110 with MAC OSX 10.7.3

The report on my printer Photosmart D110 shows I am connected but my MAC says printer not connected? It was working last week - What happened?

Cdero, welcome to the forum. Try printing a network configuration page. Follow these steps to print a configuration page.
Touch the button ( ) next to the Setup icon ( ) in the lower-left corner of the HP product control panel. The Setup menu opens.
Touch the Right Arrow button ( ) to scroll through the options and select Wireless , and then touch OK . The Wireless menu opens.
Touch the Right Arrow button ( ) to scroll through the options and select Wireless Settings , and then touch OK . The Wireless Settings menu opens.
Touch the Right Arrow button ( ) to scroll through the options and select Print Network Configuration Page , and then touch OK .
Let me know if the printer has an IP address. Should be in this format: 123.456.789
Thanks!
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Mac OSX 10.5.8 Leopard & HP Photosmart 3180

I have a HP photosmart 3180 and recently upgraded to 10.5.8 "still leopard". I recently looked to install this printer again on network, so I went to hp site and downloaded latest driver (marked 10.4, 10.5) downloaded and installed. Hooked printer up and everything seemed to work fine, until I tried to restart. Upon restart the MOUSE FREEZES and the Apple bluetooth app launched looking for my mouse?? The mouse freezes in upper screen. I tried a different usb connection, nothing? I tried to restart again, zapping pram, nothing? starting to get anxious (computer is less than year old & printer is only three years old) unplugged all usb devices and restarted again.....ok everything works again...plugged in printer ok....restart same problem. So now I have narrowed it down to the printer which for all intent and purpose is still brand new, maybe printed about 50 pages in all.
Since I narrowed it down to be an HP issue, I called HP support. First they wanted $35 because my printer is TOO old for phone support, out of warranty. Was given an option to use chat support by operator. I tried Chat support and was told they do not offer chat support for Apple? (I was sent there by their operator that knew I was running Mac OSX) I was then offered email support, still waiting. During my conversation with HP representative I was basically told that they no longer support that model (because it's 3 YEARS OLD!) I could pay and upgrade to another printer. When asked about the HP policy and driver/hardware support for printers more than 3 years old, I was told " since they release so many new printers, they do not offer full support for hardware more than 3 years out."
Have I lost my faith in Apple? NO it just reaffirmed that non-apple products and support are crap.
They will not help you unless you pay another $35....in which case I was told again this is only "best we can do" help and will not guarantee that they can get things to work. Way to stand by your product, HP !!
So, I will never by another HP product again as they refuse to stand by their own hardware past 3 years!, by their own admission. I can use the printer as long as I unplug it when not in use. lol

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Driver for HP Photosmart 7510 for Mac OSX 10.8.4

Hi All,
I have an HP Photosmart printer and the drivers won't install on my new MacBookPro which has Mac OSX 10.8.4
I am unable to find any drivers on HP support for this OS. The drivers installed without any problems on my recent iMac which had OSX Lion. Can anyone help me with an answer. I can use the printer wirelessly with my iPad 3rd Gen, iPad Mini, and iPod Touch 4th Gen. Any assistance wolud be fantastic.
Unkei
"Life is a school. Study hard. The final exam is comprehensive and counts for 100 percent of your final grade."
Unkei
This question was solved.
View Solution.

Hi,
Download and install the drivers below, be sure to select HP Recommended Software while installing:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107205-1&cc=us&dlc=en&lc=en...
Once the installation completes reboot your Mac and run Software Update to ensure the latest drivers are installed.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

Good evening all,
Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again.
I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something.
It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
Any help would be greatly appreciated!!
Errold

Hi,
Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
I would also suggest updating your router's firmware and check if that may help:
http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
For any help with this proccess I would highly recommend contacting Dlink support.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart d110 won't scan with Mac OS X 10.9

"HP Scan" utility used to work correctly with my iMac and hp Photosmart d110 printer/scanner. Since updating to Mac OS X 10.9.5, the scanning no longer works. I've downloaded most recent scanner drivers, and installed multiple times. Connection is hardwired USB.
Multiple symptoms: "can't connect" errors, or scans very slowly and generates a black blank page. Printing works fine.
(Windows laptop scans correctly, with wireless connection to the d110.)

Hi,
The HP scan app is no longer available for Mavericks, scannign can be done from Image Capture or Preview:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
If that fails as well, try updating the software by following these steps:
Click the Apple icon, then select Software Update.
Click the top Store menu and click on Reload Page.
Be sure to install any HP or Apple update, then try scannig again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Problem - HP Photosmart D110 and Mac OS X 10.9.4

Hi guys,
I have problem when try to scan images trough photosmart D110 on OS X 10.9.4
The preview is ok, but when I try to save, file is saved corrupted.
I try all available formats but same problem.
Please any help will be appreciated...

Hello @TI-Sonhart , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into scan issues. I would like to help.
Does this issue occur when making a copy at all?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

OSX 10.6.8 issues with hp photosmart D110

I used to be able to print and scan from my iMac running 10.6.8 to the hp photosmart d110. Now, it doesn't show up as a bonjour device. When I ping it, I get access denied. Still air prints from iPhone and iPad. Works with win 7 machine. Any ideas why this happened?solutions appreciated.
Thanks

Hello Broleen,
Thanks for the post. With this one, have you changed/replaced routers recently? Moved it to another location? Since you can Airprint sucessfully, I don't suspect it is a hardware wireless radio issue. I might suggest taking a look at this document below, there are some excellent t-shooting steps to help resolve wireless related issues. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02009834&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N9173

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

For Mac OSX version 10.9.4 looking for the preference tab

I want to print just a portion of a page but can't find a preference tab. I highlight a section of a page so I can print just that section but I am unable to find a preference tab, I have a HP 6600 all in one and have a new Mac version 10.9.4 Mac OSX
What am I missing?

Hi pagosselin,
Welcome to the HP Forums!
I see that you are looking for the preference tab in Mac OS X 10.9.4 with your HP 6600 so you can print just a section. and I am happy to help you!
Please try the following:
Reset the printing system. OS X Mavericks: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Make sure you have the full feature software and drivers installed. HP Officejet 6600 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks.
After that you will want to make sure the correct driver is selected. Make sure it says HP Officejet 6600 instead of the HP Photosmart that is shown in these images, and not Airprint.
Let's start with that, and we will go from there!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Photosmart d110 printer is now unable to find network ssid.

Photosmart d110 printer worked fine wirelessly for a few days. Now both Macs on network cannot find printer and printer cannot find network.

Tell me about your network - what router? What kind of encryption (WEP, WPA, etc)? Is the printer near the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

PhotoSmart D110 won't scan with Macbook Pro

Over the past few years of upgrades to my Macbook Pro, my ability to scan from the menu on my Photosmart D110 quit working. A message says scan from the computer. That used to work, but now the application to do that has disappeared. I have downloaded new drivers, but nothing has helped. Suggestions? Thanks for any help.

Hi , I see that you are unable to scan from the printer to the computer, using Yosemite. I would be happy to help you.
The drivers for Yosemite are installed by the Apple Updates, HP Printers - Installing a Mac Printer Driver Using Apple Software Update. There won't be a option to set in the software to Enable Scan to Computer settings with the Apple Update drivers. It can only be enabled with the Full Software from HP. But it isn't available online for Yosemite. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

HP photosmart D110 Mac OSX 10.8.5

Similar Messages

Maybe you are looking for