HP Photosmart D110 scanner doesn't work

Hello,
I recently noticed that my HP Photosmart D110 printer/scanner won't scan.
I've reinstalled the printer on my HP computer and replaced the driver software from the original installation disk.
Still, no scanning.
An error message keeps coming up about the "device" not being fully installed.
The Photosmart printer/scanner is accessed through my network modem.
All the computers in the house can print but no scanning is possible at this time.
Any solutions or suggestions would be appreciated.
Thanks,
hpod1

Hey there and welcome to the community, @hpod1
I read about the issue you're having with scanning with your Photosmart D110 model and all of your computers.
Seeing that you cannot scan with any of your computers is concerning and would present the idea of a hardware problem within the printer.
I would suggest trying to make a copy or two and let me know what happens.
If copies do not work, try power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Best wishes, hope to hear from you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Photosmart D110 Scanner won't work with Mavericks

Since upgrading to Mavericks on my MacBook Pro, I can't save a scanned document, and I can't email one. I get an error message about the format of the document (and it's a document I've previously scanned and sent in a previous OS). Now, after trying to cancel the scan and the save, I'm hung up on "canceling." Can't get anywhere. Can anyone help? Thanks.

After being on the phone for 90 minutes with HP support, we came up with the following solution.
Download OXS 8 driver and software for the D110. Then download this from apple, a fix.
http://support.apple.com/kb/dl907
good luck!

Mac Powerbook with HP 5510 printer. Scanner doesn't work since I installed Lion

Mac Powerbook with Lion. Scanner doesn't work since I installed Lion

What kind of computer is it? Powerbooks can't run Lion. MacBook perhaps?
With Lion, all scanning is performed through Preview. Use Preview.

I recently installed WIndows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

I recently installed Windows 8 and now my scanner doesn't work. I have an HP M175nw printer/scanner

update your scanner's driver. ie, see if hp has a win 8 driver for that model.

Scanner doesn't work w/All in one Series

scanner doesn't work with Deskjet F4100 series. My printer disappeared when I tried to print a PDF file. I had to uninstall/reinstall, but now I don't have access to HP Solutions Digital Imaging Monitor It always says "no devices found" and closes. I have Window Vista 32. I tried to find the ".exe" file, but errors say file cannot be found. The printer works, but the scanner. It shows that I have Xerox Work Center scanner but the profile shows no filename or resolution. The properties say the scanner is working properly, but HP solutions can't detect a device. Help
This question was solved.
View Solution.

Hi,
I received an update from HP on Sat urday and when I completed the update (took about 3 hours) along w/reinserting the disk that came w/the F4100 all in one, I could finally connect to Solutions Center, and now I can scan. YEA!!! When I turned on my computer the update automatically came up and the restore point from a previous installation attempt. Thanks so much this means the world to me. I will also send this message from another person who was helping me.
Moneybags

I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?

Download and install the MX310 scanner driver and MP Navigator from Canon.
http://support-au.canon.com.au/P/search?model=PIXMA+MX310&menu=download&filter=0 &tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8

I upgraded my software to OS X version 10.9 and now my Canon MP145 scanner doesn't work, what should I do ?

I upgraded my software to OS X version 10.9 and now my Canon MP145 scanner doesn't work, what should I do ?

Welcome to Apple Support Communities
There are two Applications folders: /Applications (in the root level of the hard drive) and ~/Applications (in your user folder).
If you have a look at the bottom part of the screenshot, you can see where Chess is stored, and it indicates that it's stored in /Applications, so you are looking for applications in the wrong folder.
Open a Finder window, go to Finder menu (on the menu bar) > Preferences > Sidebar, and mark Applications. Then, close the Preferences window and you will be able to access to the Applications folder in the Finder sidebar. Another option would be to go to View menu (on the menu bar) and type:
/Applications

My HP Photosmart C5280 scanner won't work right anymore. I always used it with my Picasa 3

For some reason my HP Photosmart C5280 scanner won't work with my Picasa 3, and it used to. My PC is also an HP Pavilion g6, with Windows 7. I tried downloading a new driver, as the CD was too old to have Windows 7, and also updating my Picasa, but none of that worked. I'm trying to scan an old photo. I'm just not having any luck at all, and it used to work like magic.
Thanks.
Maerzie

Just when I thought oneof the cures was going to work, I got the message: "The system can't find the "file" specified!", so I opened the "file" with the new drivers, which I THOUGHT it meant, and , of course, it was WRONG! What file?? PLEASE help!

BBM Barcode scanner . doesn't work anymore !

BBM barcode scanner doesn't work anymore , and i've downloaded a barcode scanner
like QR Scanner Pro and Barcode scanner from app world and it doesn't work either,
it was working fine month ago, i have no idea what happened to it
Please Help i really need it for some groups i wanna join

Have you tried contacting the developer of the app, perhaps? Since it's an app, the developer is responsible for support, aren't they?
Beyond that, the next step would be to ensure that your BB OS is indeed compatible with the app. If so, then further steps could be to seek out an updated BB OS (one that, of course, remains compatible with your apps) as well as performing a clean reload of your BB OS and all of your apps...just in case something has become corrupted in the BB OS itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP C4472 Scanner Doesn´t work

When i try to scanne something to my macBook the HP says "Scanning Error, try scan from computer or see documentation". So i try to scan from my computer it doesn´t work either. Sometimes after all that ptocess the HP colapses and i have to unplug it.
By rthe way everything is updated.

Hi,
What Mac OS X version are you using, is it Mountain Lion (10.8) or Leopard 10.5.8? you post indicate two different OS versions...
If it is Mountain Lion, scanning from the front panel is no longer supported and you may scan using Image Capture, Print & Scan or Preview as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=3655577
Shlomi

Since connecting my printer to airport express my scanner doesn't work. Help?

My printer is connected to our Aiport Express and now prints wirelessly from all computers in our home. BUT now the scanner does not work. I fear I may not be able to keep the printer (HP CM1312nfi MFP) connected to the A/Exp if I want it to still be able to utilise the scanner. Does anyone know how to make the scanner and printer work through A/Exp? Any help would be appreciated.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

HP photosmart C6280 scan doesn't work after once working

I can't understand it - six weeks ago I came on this forum with this problem and it was solved. I used Preview and' import from scanner' which worked fine. I tried it yesterday and it doesn't work again! I've downloaded new drivers from a site suggested to someone else on the forum with the same problem, but it still doesn't work. All I get when I go into System Preferences - printers & fax - is 'No scanner selected' its driving me mad! I had to go and do scanning from my old PC! Heresy! Someone please help!

I seem to have resolved this problem now. I uninstalled ALL stuff I had downloaded including drivers etc., and just went to the page suggested on this forum and put on the new stuff from HP I can now scan properly from my computer without using Preview.

HP photosmart C6280 scan doesn't work

Hi all, I've installed Snow Leopard with no problems at all, until now. I tried to scan a document today (it worked before SL) and it says it can't find the scanner. I downloaded new drivers but it still doesn't work. Any suggestions? thanx

Hi deetroy12,
I am glad to hear, you are mow able to scan from preview.app.
I just want to tell you the full version of HP software is now available here:
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&lang=e n&product=3194498
If you want to install this software (including OCR functionality) you should ensure the former version of HP software is completely removed from your MacOS 10.6.1.
If the HP software is still at your system you should run the HP uninstaller located in /Applications/Hewlett-Packard/. In this uninstaller you can use a hidden function to really remove ALL rests of related HP software: After clicking "Continue" in 1st window of the uninstaller you should press and hold following 3 keys at your keyboard while clicking the "Uninstall" button. the 3 keys are "Ctrl", "Option" and "Cmd". After clicking "Uninstall" while holding the 3 keys you should see a dialog with yellow exclamation mark "Are you sure you want to remove all HP software...?"
Click OK and input your user password. So all related HP software will be gone. After Restart you should install HP software version 10.3 (for MacOS 10.6) from link above.
After this installation the real scan software is "HP Scan" located in path /Applications/Hewlett-Packard/.
With Regards
Fred

HP C4280 All-in-one... scanner doesn't work

The scanner worked fine when we got the printer several months ago. Now when I try to scan, I'm prompted by the printer to connect a USB cable. The problem is that the USB cable is connected already. I'm sure this is a driver issue, but I couldn't find anything on HP's website to answer my question.
Any thoughts would be greatly appreciated.

I am in the exact same boat. What a crock and they sold this thing to me for $100 at the store!!
I've waited I think nearly 1.5 years to open the **** thing and now it doesn't work with Leopard. The heck am I supposed to do now?
Well, just so the details are etched in stone, the printer works fine with Leopard without installing anything. According to the HP website, you don't need to install to print.
Try scanning: I got the same "USB Cable not installed" warning on the printer LCD, and several threads on a Google search brought up to install the software and that should correct it. Nope. Uninstall, reboot, re-install with the USB cable NOT connected to the computer. Nope.
I'm about to uninstall and throw the printer out the window onto the nice new concrete path that was poured during a -18° F week and it's cracking already. I feel like I'm surrounded by morons!
Edit: I'm running 10.5.6
Message was edited by: keraunoscopia
Message was edited by: keraunoscopia

Have a MP530 (Using Vista) and Scanner Doesn't Work

I downloaded all the software, etc. from the Canon site and everything works except the scanner.
It keeps giving me that it isn't connected. I have done all the necessary changing of USB ports and reloading the software from the site and it still doesn't work. Canon help was no help.
Can anyone figure this out for me.
Thanks.

Hi MitchT,
I would like to have you create a new user account on your computer and then attempt to scan to see if you are able to scan under that account. To create new user account, please follow these steps:
1. Click Start and then Control Panel.
2. Click User Accounts and Family Safety.
3. Under User Accounts, click Add or remove user accounts.
4. Click Create a new account.
5. Type the name that you want to use for the account.
6. Select Administrator for the account type, and then click Create Account.
Once the new account has been created, please login under that account and then attempt to scan again. Are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HP Photosmart D110 scanner doesn't work

Similar Messages

Maybe you are looking for