HP Photosmart D110a will not print a complete picture.

My printer suddenly started cutting the first part of the printed page off. If it's a picture, the top of the heads will be cut off and there will be empty space at the bottom. If I continue printing, it just gets worse, i.e. the next picture will cut off the whole head. I always do a print preview and the page looks fine. How can I fix this?

hi there,
Sorry to hear you two are having troubles . This article should cover your partial prints. Choose your operating system and try the steps oultined. Let us know if it helps.
Best of Luck to you both!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Photosmart D110a will not re-install

I am running a desktop computer 32 bit Vista operating system. The printer was linked to the desktop via a USB cable and toy laptop via a wireless connection. The printer suddenly disappeared from my printer list and by the time I noticed it, it was too late to do a system restore. Since then I've tried everything to reinstall it, using both my install disk and the latest software from HP, both the install software and the driver. I've cleaned everyting off my computer, both files and registry enries with no success.
When I try to do a wireless connection, the install program detects the printer, but later on in the process it can't find it, even when I give it the IP address.
When I try a USB install, the driver installation fails. However, if I just connect the printer via USB cable, the driver loads, but there is no printer configured on my system. I've tried almost everything on the forum suggestions with no luck.

Hi @harveyclyde,
Welcome to the HP Forums!
I understand that your HP Photosmart D110a will not re-install on Windows Vista. I am sorry to hear this but happy to help!
Please take a look through this guide, 'Printer Not Found' Error Message Displays for the HP Photosmart (D110a and D110b) e-All-in-One Prin.... This is for the wireless connection.
For the USB connection, I would follow this guide, Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri....
We will start with these guides, and see what happens.
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My HP Photosmart 8250 will not print in black.

Hi,
My HP Photosmart 8250 will not print in black. I saw previous posts stating that it will not print in black if any of the color cartridges are empty, but all of the cartridges have ink. Thank you!

Hi rine051662hart,
Welcome to the HP Forums.
I see that you are having an issue when attempting to print in black ink.
Please click on the following link that deals with when the Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
Please feel free to write me back if you have additional questions or you can contact HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Photosmart 5510 will not print Black Ink!! - Time to "break-up" with HP

I came upon this forum by doing a google search for the issue I'm having which is my HP Photosmart 5510 will not print black ink. The printer is a year and a half old and is used only for home office use (not a heck of a lot of printing being done)
It started right after I installed new ink cartridges (all four of them) I want to mention hear that I ONLY buy genuine HP ink cartridges from Staples and when I replace my cartriges I replace all four at the same time even if one ink level is not considered "replaceably" low. When the issue started I thought I must have gotten a bad black cartridge so I went out and bought another one but was still having the issue. So that's when I did my google search.
I tried all the suggestions (several times) on this post (which did not reslove the problem) : http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Photosmart-5510-will-not-print/m-p/1...
and I tried a "Hard Reset" as suggested here (again did not resolve the problem) : http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Photosmart-5510-Will-not-print-in-...
After trying all of these my color ink is less than half full....remember....I started with 4 brand new ink cartridges...so now, I'm out roughly $85 in ink just trying to resolve a problem that should not have happened in the first place!! Shame on HP for makeing such poor quality products. I gave up on HP computers years ago and now I'm giving up on their printers!! This HP Photosmart 5510 All In One printer replaced an HP Color Laserjet CM1312nfi printer (which cost approximately $400) that only lasted about 3 years. Sorry HP but that's it....I'm moving on! Consider this our "break-up" letter.

Hi TisKate, sorry to hear that you are having printing issues when it comes to printing in Black. I am also sorry to hear that you are breaking up with HP. I would like to offer a couple more troubleshooting steps before we say our fond farewells. Now this might sound silly but really it isn't. If you have the power cable connected to a Power bar/strip, please remove it and connect the power cable directly to a wall outlet. HP printers already have a built in surge protector and if you have it in a strip/bar, the printer will not get all the power needed to function properly. This can cause printing issues or false error messages on the printer display screen. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
The other step I would like to take is on the printers display touch screen. Please use the right arrow key and go to the Wrench icon. Press the wrench and go to the Tools menu. Once in the Tools menu, please select Clean Printhead. Use the cleaning utility 2-3 times or until you see a change in the print status reports. It might take a few cycles but I am confident that it will make a difference.
I hope you and HP can still be friends( friendly humor).
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My Photosmart C6280 will not print in color.

My Photosmart C6280 will not print in color.All ink levels are good. Factory defaults clicked. Did I override something without realizing it? I don't see anywhere to click for grayscale. I am using an APPLE AIR....I have also turned the printer off and on again..

Hi there @Ashley31 , welcome to the forums
I read about how you cannot print or copy in color. Not copying in color is concerning, as the copy is a stand alone function that does not involve the computer in any way.
I'd suggest power resetting the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also remove the ink cartridges and reinsert them and try a color copy again to see if that helps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes to you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My photosmart 6520 will not print a PDF file.

My photosmart 6520 will not print a PDF file

Hi Silverfox2895,
I see that you're having problems with printing PDF files. I would try using foxit reader below.
Foxit Reader
Let me know how it goes.

Photosmart D7560 will not print envelopes - load paper into main tray

My photosmart d7560 will not print envelopes, after moving the envelope into position for printing, the message "load paper into main tray" is displayed. It does print the envelope data correctly on a piece of 8.5x11 paper. Setup is for a #10 envelope. Envelopes are self sealing. I have tried creasing the edge better but that didn't help. I tried a non-self seal (which had a letterhead on it so I couldn't use it for this mailing) and it DID work. Is there any way to make self seal envelopes work in this printer?
This question was solved.
View Solution.

Do you have the flap folded inside the envelope, so that it does not stick out?
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Hp photosmart 5515 will not print black.

hp photosmart 5515 will not print black, but will print colors (cyan blue yellow). Printer shows full inks on all colors.
This question was solved.
View Solution.

No solution. Power cycled several times, power cycled computers, modem, router, performed all recommended cleanings, changed all ink cartridges, checked it over several days - no go. Then, suddenly, after weeks, it started printing again. That's one hell of a gremlin. Throughout all of this time, my inexpensive Canon printer never faltered.

F2480 will not print A4 size pictures,

My F2480 will not print A4 size pictures (210 x 295mm) the largest it will print is 200 x 265 mm Help needed please

Hi,
I assume you are using a Photo Paper, Please clarify if I am wrong.
Be aware that while the Maximum size for plain paper is 210 x 297mm,
The largest supported Photo Paper is 203.2 x 254 mm, as you may find listed within the product specification's Paper Types and Sizes section:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01758526&tmp_task=prodinfoCategory&cc=us&dlc=en...
Additionally, your printer support borderless printing up to 100 x 300 mm and not full A4 size
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart c4780 will not print in color

Brand new to forums... I am using a MacBook Pro, OS 10.6.8. I recently bought a used photosmart c4780. The owner said it only prints black. When I set everything up, it wouldn't print at all, as the black ink was depleted. I replaced the black cartridge and now it prints. However, even though the color supply levels are at about half full, it will not print in colorI receive no error messages. Have tried different settings in the Print dialog options to no avail. Have not been able to find anything online that addresses this exact issue within the parameters as I've described them. Any help appreciated.

Hi tomanifest,
The document at the link below will assist you with the warranty end date of you color cartridge.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00206040&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

Hp photosmart 5510 will not print black

I have a photosmart 5510 which will not print black. All the other colours are OK. Have changed the cartridge and gone through all the steps on the diagnostic site without success.
I really need to get it going. Any ideas gratefully received.
Cheers.
This question was solved.
View Solution.

Here is a link that may assist you with this problem. It may a be a print head.
http://goo.gl/OTmPV
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HP Photosmart B210a will not print black ink on plain paper... only on photo paper.

Hi, I have an HP Photosmart B210a that wont print black ink. I have used a whole set of ink cartridges by cleaning the print heads, allignment etc. I just installed ALL NEW cartridges and the sae thing is ocurring. I have replaced plenty of cartridges and am experienced. Just all of a sudden one day the printer stopped printing black ink on plain paper documents like with MS Word, excel and PDF, etc. It's not set to greyscale either, actually it wont even print grey! However, if I go to a photo with plenty of black in it, it will print it JUST FINE!!! I'm at my wits end! I have followed EVERY head cleaning advice in the forums but it will not print black in except on photos... Please help!!!!

The document here may help, although you have likley already done most of the steps. Be sure to check the vents. If the above does not resolve black not printing on your Photosmart b210a the post here may help.
The black cartridge uses pigmented ink which is not compatible with photo paper. Although the printer appears to be printing black properly on photo paper it is actually using color mixed together to produce black in this case.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

.HP Photosmart 5514 Will not print black

I changed my black ink cartridge in my HP Photosmart 5514 (product number CQ183A, serial # {Private Information Removed}) and now it will not print black. The colors work fine, just no black. I have cleaned the print heads, done the secondary clean, tried page allignment, I have turned it off and restared it. I have plugged it into a new outlet, I cleaned the head of the cartridge and the printer. Nothing has worked. Please help me. The printer ran out of ink, I bought a new cartridge, I put it in, that is all I did to it. I have a "genuine HP black ink cartridge 564". It is not a refilled, refurbished, used, ect. ink, it's brand new.
This question was solved.
View Solution.

Hi,
Tried all the items in the "Solution" link, but no dice. Will not print in black, will not copy in black, out of warranty, tried two new HP black cartridges, still no luck. Have used 1/2 of my new color cartridges up in printhead cleaning. Anyone have other ideas or a different path to success?

HP Photosmart D110a will not print a complete picture.

Similar Messages

Maybe you are looking for