Hp photosmart is not communicating with my macbook pro

hp photosmart pro b9180 and macbook pro  gets error message
Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on.
Done that and still doesn't work?
I don't have the installation disc.
I have a photosmart 8200 and that works fine.

What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

    My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
    I am getting an error message as soon as I try to connect my Apple TV
    An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
    it was working fine however after the upgrde it is giving me the above error message

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • My iphone 5 will not sync with my macbook pro.  it says my computer is no longer authorized to download purchased items from the iphone

    my iphone 5 will not sync with my macbook pro.  it says my computer is no longer authorized to download purchased items from the iphone.  However, when I go to authorize my computer, it says it is already authorized.  How do I fix this?

    You can't change the Apple ID that the Authorize dialog comes up with by default. It's showing you that Apple ID for a reason: it means that the items you want to play were purchased using that Apple ID and therefore you need to authorize your computer with that Apple ID. Changing the Apple ID given completely defeats the entire purpose.
    If you don't know the password to the given Apple ID, then you will no longer be able to play those items.

  • I need to generate a still shot from from a video. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase.

    I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.

    For FREE do the following:
    When you get to othe part of the video you want a still shot from, put the video on pause. 
    Take a screen shot:  Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab.  Will do the above with just a single click.
    If you still want to purchase software, suggest that you do a Google & MacUpdate search.  This way, you can find exactly what you want. 

  • I have a sony handy cam which states it is not compatiable with my macbook pro. need some help.

    Hello, i have a sony handy cam and it states that it is not compatiable with my macbook pro to download videos or pictures. Any suggestions on how this can be done???

    Hello, I also have a Sony Handycam; trying to download movies to the my Mac Book Pro 15" was very a very slow process but it is possible. Then I tried to download the movies into an external hard drive (my computer's memory got filled really fast) and from that just work from iMove but after searching through Sony's website I read it is necessary to acquire a transference cable to improve this process.

  • HT4623 Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth

    Why my iPhone 5 is not Comparable with my MacBook Pro when try to play music by Bluetooth can anyone help

    Hi katherine cordelia,
    Welcome to the Apple Support Communities!
    If your iPhone is not being recognized in iTunes on your Windows 8 computer, I would recommend reading over and performing the troubleshooting steps in the attached article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • TS3048 The keypad is not registering with my macbook pro - changed batteries but still not working.  Bluetooth says it is connected.  Suggestions please.

    My bluetooth numeric keypad is not registering with my macbook pro - changed the batteries when the light started blinking - but won't work.  Bluetooth says it is connected.
    Suggestions please.

    Your MBP sees the Bluetooth keyboard but won't pair with it probably because the keyboard is pairing with another computer or device nearby. If you had previously paired the same keyboard with another device, go to the other computer or device and either unpair it or have the device "forget" the keyboard. Then you will be able to pair the keyboard with your MBP.

  • My iphone 4s is not connecting with my macbook pro via blue tooth

    my iphone 4s is not connecting with my macbook pro via blue tooth

    Hi pogster,
    Thank you for responding. Everything was working a short while ago. Apple tv, iPhone 4s and macbook pro on blue tooth and now nothing works. The assistant looks at the network as not there. but, the macbook pro works fine wit the blue printer??
    Philippe Lepetit
    [email protected]
    La vie est belle.
    (250) 744-4557

  • My iphone5 is not syncing with my macbook pro.

    My iphone5 is not syncing with my macbook pro.  Specifically the calendar.  it syncs with my iPad fine just not the laptop.  Suggestions?

    How do I upload my Microsoft Outlook to replace the Calendar and Contacts on Icloud?  My computer is Windows 7 and Microsoft Outlook 2007.  Icloud is all messed up and will not let me delete incorrect information.  It keeps saying it cannot delete because of server error.
    My iphone 4 and my computer are correct.  Only Icloud is wrong.  I have had to disable Icloud until I can figure out how to correct it.  If anyone knows what I should do, please let me know.
    Thanks.

  • My iphone5 running ios7 will not sync with my macbook pro

    My iphone 5 running ios7 does not sync with my macbook pro os x 10.6.8
    Suggestions?
    Thank you...

    My iphone 5 running ios7 does not sync with my macbook pro os x 10.6.8
    Suggestions?
    Thank you...

  • Why is my CD with documents not opening with my MacBook Pro?

    Why is my CD with documents not opening on my MacBook Pro?  I have inserted the CD and keep saying that it is not apple apps.

    I think I'm running iTunes 11.1.2.
    Also, my computer isn't even recognising it - its just saying my USB ports are power surging.
    (Thanks for your help! )

  • HP Laserjet ProP1102 will not connect with my MacBook Pro

    My new Macbook Pro with Yosemite will not print on this printer. It did do so a few days ago but not anymore. In wireless mode it will not communicate with the printer (or the printer will not communicate with it.) When connected with a wire the printer does not respond.
    On my old MacPro with Mountain Lion it will print with a wire but not without.
    There was a fleeting mysterious notice saying i needed a software update but I cannot find anything to this effect on the HP website.

    Hi @DavidL1,
    I read your post and see that you are unable to print by a USB or Wireless connection. I will certainly do my best to help you.
    Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Restore the printer's default wireless settings:
    1. Turn the product off.
    2. Press and hold the wireless button and the cancel button and then turn the product on.
    3. Hold the buttons until the printer stops making noise, then release the buttons.
    Print a a Configuration Page to make sure the IPv4 and SSID are cleared of the old settings.
    Printing a Configuration Page.
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Follow this document to reconfigure the printer over the wireless network.
    Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer.
    Under OS X v10.10 Yosemite, OS X v10.9 Mavericks and OS X v10.8 Mountain Lion select Method three: Wireless setup using a USB connection.
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • WD External Hard drive not working with new Macbook Pro

    I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
    Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

    I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
    1. go to the manufacturer's website (in this case Western Digital),
    2. locate my external HD, download the download.
    For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
    http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
    Install the downloaded app.
    3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
    [I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
    4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
    5. Run "WD Drive Utilities" and run diagnostics.
    6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
    Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

  • Photoshop CS2 is NOT compatible with my MacBook Pro!

    Despite Apple's marketing hype to the contrary, I had the following experience with the CS2 Suite. I loaded it from disks, registered and activated it, and then immediately opened a photo image for editing. I tried to crop the image, and the response was "That operation cannot be completed - Your scratch disks are full." Now, I have ~90GB available on the "scratch disk," so it is NOT full.
    I called Adobe Tech Support. The tech said "CS2 was not really designed to work with the new Intel chips. If it's not working for you, we're sorry, but there's not much you can do about it. No 'patch' or software upgrade is anticipated soon."
    The tech said that he hadn't heard much about this issue; is that for real? Am I having a unique problem for some reason? At least he didn't charge me $39, that's one benefit I can think of. Any hope out there for a solution to this issue from the Apple side?
    17" MacBook Pro   Mac OS X (10.4.6)  

    I just completed a CS 2 project involving both Photoshop and InDesign on my MBP 17 and had only two problems -- InDesign prefs got corrupted. I cleaned them out and then went from there with no problems until I opened a figure in Photoshop -- the program informed me I was missing components and needed to reinstall Photoshop. But it let me edit the file. Once I was done I did a reinstall of CS2 and everything seems to be fine now.
    I have noticed a prevalence for prefs files to get trashed on this machine more so than on my G5 iMac or my PPC PB.
    MBP 17   Mac OS X (10.4.6)   2GB

  • Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

    I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2)
    The new Macbook is not responding at all when i plug in my toneport, all the software for the toneport is installed.
    I think the problem is that my toneport is not compatible with an intel Mac. Is this right?
    And if it is can i fix this problem with some kind of upgrade for my toneport software(gearbox)?
    And if there is no solution can someone recomend a new audio interface for me to get? Under $200.

    I use a Toneport UX2 with my intel iMac. I never had the problem you are describing while using Gearbox with GB. However your problem sounds very similar to one I have experienced when I loaded up Line 6 Pod Farm. I discovered that when I start Pod Farm and get the message you mentioned, if I quit Pod Farm then immediately start it again, everything communicates just fine and I'm back in business. I would like to see a fix for this glitch, but for now I just start twice and then get to work.
    Give it a try! I am curious to know if you are in the same boat as me.
    As a side note, Recently Line 6 offered Pod Farm for no charge to registered owners of a Line 6 interface such as ours. You may want to check it out. It gives you some more options to play with.

Maybe you are looking for

  • Install a second hard drive

    I have just removed the hard drive from my older PC. It is a Western Digital, WD2000. I want to install it as a second hard drive in my HP Pavilion p6516f Desktop PC. How do I go about it?

  • Usage Tracking - Access problem when Authentication Mode = Windows

    Hi Everyone, I´m working on UPK Usage Tracking configuration, in order to provide the finished training material. 1) In Server01 (on Window Server 2003) the UPK Usage Tracking is installed 2) In Server02 (also on Windows Server 2003) the Usage Tracki

  • Mails are not going

    Hi Experts, I have developed a RFC to approved leave, this RFC will send mail to required recipients. After executing the RFC, when we check into the TCODE: SCOTT mails are sending properly. While the same RFC calling from .NET mails are not going. P

  • Premiere Pro CC Quits On Startup?

    So for an odd reason as soon as I start it up it will just quit and I get a 'premiere pro cc has stopped working' message. I've tried re-installing, restarting comp, runing as administrator,changing compatability mode, but still nothing. It is up to

  • Can run .exe but cannot use .exe file with 64 bit operating system

    I built an application in labview (32 bit) in xp. The exe file generated from the labview 2009 is able to function well in windows vista (32 bit). For this i installed run time engine and since my application requires vision tools so i also installed